Beyond Design: High-speed Rules of Thumb
Global PCB Connections: A Technical Overview of Long-flex Printed Circuit Boards
The Shaughnessy Report: A Handy Look at Rules of Thumb
Flexible Printed Circuits: A Design Primer
December 19, 2023 | Chris Keirstead, PFC Flexible CircuitsEstimated reading time: 1 minute
Flexible circuits consist of conductive strips in a sandwich of insulating or dielectric material. They resist moisture and contamination and are insulated from external shorts, with holes or contact surfaces for interconnection.
Understanding a package’s electrical requirements and not over-designing permits means taking full advantage of a flexible circuit’s potential compared to conventional wiring. Among the benefits are weight and bulk reduction, shorter assembly time and fewer errors, reproducible electrical characteristics, custom shielding, improved reliability, ability to interconnect moving parts, and an engineered appearance.
The mechanical and electrical characteristics of flexible circuits determine what type should be used. Total installed cost, including inspection, interconnection, fixturing and testing, must be weighed against the advantages of each:
- Single-sided flexible circuits have one layer of copper on dielectric.
- Double-sided flexible circuits have copper on both sides.
- Sculptured circuits are single- or double-sided circuits created from thick copper that allows connections such as fingers and pads to be relatively thick and very rigid extensions of the flexible conductors.
- Multilayer flexible circuits have several layers that are registered to each other and are separated by a cured layer of adhesive during lamination, with interlayer connections via plated through-holes.
- Multilayer rigid-flex is the combination of flex within and extending from rigid sections of the PCB.
There are two general areas of application that may take the designer down different paths. The first is a circuit that will be bent or formed into a rigid package during assembly. The second is where the circuit will be flexed continuously or intermittently during operation.
To read the rest of this article, which appeared in the December 2023 issue of Design007 Magazine, click here.
Share on:
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
11/08/2024 | Nolan Johnson, I-Connect007In our industry we work on solutions. This week, solutions are represented in these must-read choices. Solid state batteries make an appearance, as does LED imaging equipment at American Standard Circuits. SPEA’s AI-based optical inspection is here, as are Happy Holden’s recent article on one key engineering skill and news about a flagship R&D facility funded by the U.S. CHIPS Act.
Green Circuits Expands Certified Workforce with Ongoing Training in J-STD-001 and Space Addendum Standards
10/02/2024 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, is proud to announce the successful completion of its latest round of employee training in ITAR (International Traffic in Arms Regulations) and the J-STD-001 Space and Military Addendum.
American Standard Circuits and Sunstone Now Offering Online Flex PCB Quoting
10/01/2024 | American Standard CircuitsAnaya Vardya President and CEO of American Standard Circuits and ASC Sunstone Circuits announced that his company will now be offering their customers the convenience of Instant Online Quoting for Flex PCBs through Sunstone’s OneQuote form.
American Standard Circuits to Exhibit at SMTA International Conference and Expo
09/26/2024 | American Standard CircuitsAmerican Standard Sunstone Circuits will be exhibiting at SMTA International 2024, Oct. 22-24, at the Donald E. Stephens Convention Center in Rosemont, Illinois.
ASC Sunstone Circuits to Present Lunch and Learn and Exhibit at PCB West 2024
09/24/2024 | ASC SunstoneASC Sunstone Circuits will be exhibiting at PCB West 2024 Conference and Exhibition to be held from October 8th through the 11th at the Santa Clara Convention Center in Santa Clara, California.