Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
Beyond Design: The Metamorphosis of the PCB Router
Uyemura Expands Technical Service Capacity in the Northeast
January 9, 2024 | UyemuraEstimated reading time: Less than a minute
Katarina Roy has been appointed Technical Service Engineer, expanding Uyemura’s technical resources in the US northeast and the province of Ontario. She will work from Andover, MA. and the Uyemura Tech Center in Southington, CT.
Roy formerly worked for a medical device manufacturer, where she had both R&D and troubleshooting responsibilities. Most recently, she was a Manufacturing Engineer for Vicor Corp., a global leader in high-performance power modules, where her focus was process development, and she became highly knowledgeable about the optimization of Uyemura chemistries.
That knowledge was immediately helpful when she joined Uyemura, and assisted in the installation of ENIG chemistry at a customer location in Slovenia. In January, she will participate in the installation of a new ENEPIG line for a major US customer.
Roy has a B.S. in Chemical Engineering and Lean Six Sigma training. She recently conducted a Lightning Talk on data management.
Share on:
Suggested Items
Uyemura Expands Engineering Team in Great Lakes Region
05/30/2025 | UyemuraAndrew Jin has joined Uyemura’s Engineering Team as Technical Service Engineer for the Midwest. Jin was formerly with Sensient Technologies, Flavors and Extracts Division, where his focus was CO2 emissions and water quality; he also did capital project work with production equipment.
Real Time with... IPC APEX EXPO 2025: Uyemura—Inside the Specialty Chemicals Market
04/03/2025 | Real Time with...IPC APEX EXPORich Depoto discusses Uyemura's focus on specialty chemicals and market trends, particularly the shift towards HDI and UHDI products. Rich highlights innovations in surface adhesion and micro etches for copper, essential for high-speed transmission.
Uyemura Expands Northeast Sales Team
01/23/2025 | UyemuraJason Reese has joined Uyemura as Northeast Regional Sales Engineer. Reese was formerly Technical Sales Manager for Metalor Technologies, a manufacturer of precious metal powders. In that capacity, he focused on metallization solutions for semiconductors, and the medical device sector.
Real Time with... IPC APEX EXPO 2024: Final Finishes and IC Substrate Manufacturing
04/24/2024 | Real Time with...IPC APEX EXPOEditor Marcy LaRont and Richard DePoto, Uyemura's Business Development Manager, engage in a comprehensive discussion about the positive aspects of the show, the benefits of RAIG in final finishes, and the hurdles faced when upgrading your surface finish. Also discussed are the role of Uyemura's MEC pretreatment agents in IC substrate manufacturing and the importance of collaboration and knowledge sharing.
Uyemura Boosts Field and Met Lab Teams
02/21/2024 | UyemuraUyemura has announced an important field promotion, and a new addition to its Connecticut Tech Center Engineering Team. Both actions are in support of the company’s increasing focus on IC substrates, and its role as a supplier to wafer manufacturers, semiconductor fabs and PWB customers.