Global Citizenship: What I’ve Learned About the American PCB Business
Global Sourcing Spotlight: The Best Products to Buy Offshore Through Global Sourcing
Nolan's Notes: The Rise (and Risk) of Data
NEC Develops RAN Autonomous Optimization Technology that Dynamically Controls 5G Networks Based on User Terminal Status
February 16, 2024 | JCN NewswireEstimated reading time: 2 minutes
NEC Corporation has developed a RAN autonomous optimization technology that dynamically controls 5G Radio Access Networks (RAN) according to the status of each user terminal, dramatically improving the productivity of applications, such as the remote control of robots and vehicles. NEC will incorporate the technology into RAN Intelligent Controllers (RIC) and conduct demonstration tests using this technology by March 2025.
Background
There is growing momentum to promote digital transformation (DX) by utilizing the latest technologies such as 5G, Artificial Intelligence (AI), and the Internet of Things (IoT) with the aim of resolving labor shortages and improving productivity. When using these technologies for remote control of robots and vehicles, two-way communication consisting of status monitoring and control instructions for each robot/vehicle must be completed within a certain period of time. However, if the communication latency exceeds the requirement, the operation is repeatedly suspended for safety reasons, resulting in a decrease in the operation rate and productivity. The communication delays, such as retransmission delays due to poor radio quality and queuing delays* due to congestion on the radio links, have been a barrier to the introduction of remote control systems. Currently, stable communications environments have been achieved by installing high performance network equipment, providing sufficient frequency resources, increasing redundancy in coding and communication paths, and pre-configuration of RAN parameters according to the application. However, with these methods, it is difficult to widely support applications that are diversifying with the advancement of DX, and the time and cost required for implementation is also an issue.
About the RAN autonomous optimization technology
The RAN autonomous optimization technology developed by NEC consists of AI that analyzes communication requirements and radio quality fluctuations on a per-user terminal basis, such as robots and vehicles, and AI that dynamically controls RAN parameters on a per-user terminal basis based on the results of that analysis. This AI learns from past operational records of robots and vehicles, and optimally controls RAN parameters such as modulation and coding scheme (target block error rate), radio resource allocation (resource block ratio), and maximum allowable delay (delay budget) while predicting the probability of exceeding communication latency requirements. Whereas in a typical 5G network, RAN parameters are fixed and set for the entire network, this technology dynamically controls them on a per-user terminal basis to improve application productivity.Technology features are as follows.
1. Flexible support for a variety of applications
RAN parameters can be dynamically controlled according to the communication requirements of applications, enabling overall optimization even in environments where diverse applications are mixed.
2. O-RAN Alliance-compliant and easy to deploy
Since it can be mounted on RIC that are compliant with O-RAN Alliance standard specifications, it is easy to install or add to existing facilities.
3. Dramatic productivity gains are possible at industrial sites
Simulation results of applying this technology to a system that remotely controls multiple autonomous robots operating in factories or warehouses confirmed that the number of robot stoppages can be reduced by 98% or more compared to cases where this technology is not used.
Future Developments
NEC plans to incorporate the technology into RIC platforms compliant with the O-RAN Alliance standard specifications and conduct demonstration tests using this technology by March 2025.NEC will exhibit this technology at MWC Barcelona 2024, the world's largest mobile exhibition, which will be held from February 26 to February 29, 2024 at Fira Gran Via, Barcelona, Spain
Share on:
Suggested Items
China Overtakes Germany and Japan in Robot Density
11/22/2024 | IFRChina's adoption of robots continues at a rapid pace: The country has surpassed Germany and Japan in the ratio of robots to factory workers, taking third place in the world in 2023.
L3Harris Achieves UK Defence Employer Recognition Award
11/21/2024 | L3Harris TechnologiesL3Harris Technologies has achieved Silver Award status in the U.K.’s Defence Employer Recognition Scheme, a coveted acknowledgement of the company’s commitment to and support for the Armed Forces community, aligned to the values of the country’s Armed Forces Covenant.
Beyond Design: High-speed Rules of Thumb
11/21/2024 | Barry Olney -- Column: Beyond DesignThe idiom “rule of thumb” is often used in electronics design and has its origins in the practice of measuring roughly with one’s thumb. Rules of thumb are easy-to-remember, broadly accurate guides or principles based on practice rather than theory. They are used to help feed our intuition to find a quick solution based on experience. We are often forced to use rules of thumb in PCB design in the absence of expensive analysis tools. We also use them to get quick ballpark figures initially and then fine-tune the numbers with further analysis. We can use rules of thumb as a sanity check to assess whether we are using our tools correctly. In this month’s column, I will present some commonly used and helpful rules for high-speed PCB design.
China’s Energy Subsidies Boost 3Q24 TV Shipments by Nearly 10%; Annual Shipments Return to Growth
11/19/2024 | TrendForceGlobal TV brand shipments reached 52.33 million units in 3Q24, reflecting a QoQ increase of 9.6% and a YoY growth of 0.5%.
TI Accelerates Delivery to European Customers; Opens New Product Distribution Center Near Frankfurt, Germany
11/14/2024 | Texas InstrumentsTexas Instruments (TI) announced the opening of its new, state-of-the-art product distribution center in Dreieich, Germany, outside of Frankfurt.