Global PCB Connections: Let the Spec Fit the Board, Not Just the Brand
Beyond Design: Refining Design Constraints
The Pulse: Design Constraints for the Next Generation
KYZEN to Spotlight Stencil Cleaning Specialties at SMTA Capital Expo and Tech Forum
February 19, 2024 | KYZEN'Estimated reading time: 1 minute
KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Capital Expo and Tech Forum, scheduled to take place Thursday, March 7, 2024, at Sweeney Barn in Manassas, Virginia. The KYZEN Clean Team will provide expert insight on improving stencil cleaning processes and information about the KYZEN E5631 and E5631J solutions.
KYZEN's stencil cleaning product line, specifically KYZEN E5631 and E5631J, provides cost-effective solutions for offline and understencil cleaning. These products were formulated to address the challenges that a dirty stencil can create as it pertains to productivity, misprints, and yields.
KYZEN E5631 quickly and efficiently cleans all types of raw solder paste flux from stencils and A-side misprints. It is a non-hazardous, biodegradable aqueous solution designed for use at low concentrations and ambient temperature in spray-in-air, understencil, and ultrasonic cleaning systems. KYZEN E5631 is proven compatible with stencil foil, epoxy adhesives, frames, mesh, and the materials comprising stencil cleaning equipment.
KYZEN E5631J is a cost-effective, ready-to-use solution that quickly and efficiently cleans all types of raw solder pastes and cleans uncured adhesives in both online and offline stencil cleaning processes, ensuring every print counts. E5631J has been proven compatible with common stencils, cleaning equipment, and a wide range of printer manufacturers.
Choosing an appropriate stencil cleaning method can be key to improving PCB print quality and process yields. KYZEN is dedicated to assisting in the improvement of these cleaning processes and providing the versatile chemistries to work within them.
Share on:
Suggested Items
The Knowledge Base: A Conference for Cleaning and Coating of Mission-critical Electronics
07/08/2025 | Mike Konrad -- Column: The Knowledge BaseIn electronics manufacturing, there’s a dangerous misconception that cleaning and coating are standalone options, that they operate in different lanes, and that one can compensate for the other. Let’s clear that up now. Cleaning and conformal coating are not separate decisions. They are two chapters in the same story—the story of reliability.
KYZEN Focuses on Aqueous Cleaning and Stencil Cleaning at SMTA Ontario
06/09/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Ontario Expo and Tech Forum, scheduled to take place Tuesday, June 17 at the Venu Event Space in Vaughan, Ontario, Canada. KYZEN will be on-site to provide information about aqueous cleaning chemistry AQUANOX A4618 and the full line of AQUANOX products.
Key Insights on Photoresist for Defect Reduction
05/21/2025 | I-Connect007 Editorial TeamIn PCB manufacturing, understanding the intricacies of the photoresist process is crucial for achieving high-quality results. Industry experts Josh Krick, a technical service engineer at IEC, and Tim Blair, a PCB imaging specialist at Tim Blair LLC, share their knowledge on the essential stages of photoresist application, highlight critical advancements in materials, and discuss common defects encountered during production. They share best practices and innovative solutions to enhance the manufacturing process, reduce defects, and ensure efficiency and reliability in high-tech applications.
KYZEN to Focus on Aqueous Cleaning and Stencil Cleaning at SMTA Juarez
05/20/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Juarez Expo and Tech Forum, scheduled to take place Thursday, June 5 at the Injectronics Convention Center in Ciudad Jarez, Chihuahua.
KYZEN’s Adam Klett to Present at 2025 SMTA Electronics in Harsh Environments Conference
05/05/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, announced today that Director of Science Adam Klett, PhD will present during the technical conference at the 2025 SMTA Electronics in Harsh Environments Conference.