UHDI Fundamentals: UHDI Bleeding-edge Manufacturing Applications, Part 2
The Shaughnessy Report: A Handy Look at Rules of Thumb
Elementary, Mr. Watson A Designer's Dilemma—Metric or Imperial Units?
Ventec Giga Solutions Announces Exclusive Refurbishment Service for PCB Lamination Plates
February 22, 2024 | Ventec International GroupEstimated reading time: 1 minute
Ventec Giga Solutions, the equipment division of Ventec International Group, has started offering a refurbishment service for separator plates used in PCB lamination processes. The service includes plate examination and production of a detailed condition report with assessment of reworking costs, before refurbishment by agreement with the customer. Refurbishment includes removal of unwanted material and restoration of the original surface finish.
“Lamination plates are exposed repeatedly to high stresses during PCB production yet have a profound effect on the surface quality of the PCB,” explained Ramesh Dhokia of Ventec Giga Solutions. “Renewing these plates sooner than necessary, incurs unnecessary costs, and can be time consuming, and Ventec Giga Solutions is now able to offer this innovative and cost-effective alternative that delivers a quality refurbished plate with a fast turnaround.”
This new service is available from Ventec Giga Solutions through the company’s exclusive agreement with Cardel Group and its German subsidiary VTT GmbH. Cardel and VTT are long term experienced producers of lamination separator plates for a variety of applications including PCBs, smart cards, and fuel cells. The company has more than 25 years’ experience producing lamination Separator plates, including development of advanced materials and coatings, and is ideally qualified to provide inspection and refurbishment.
Inspection and reporting are available for all plates supplied by Ventec Giga Solutions’ customers, including original Cardel/VTT plates and plates produced by third parties. Refurbishment is undertaken subject to findings and customer agreement.
Additional content from Ventec International Group:
The Printed Circuit Designer’s Guide to… Thermal Management with Insulated Metal Substrates, Vol. 2 by Didier Mauve and Robert Art
The Solutions Guide to… Thermal Management by Didier Mauve and Ian Mayoh
The Printed Circuit Designer’s Guide to… Thermal Management with Insulated Metal Substrates, Vol. 1 by Didier Mauve and Ian Mayoh
Roundtable Discussion: Use of IMS Thermal Materials in Multilayer Stackups for Power Applications, with Chris Hanson and Denis McCarthy of Ventec, Rax Ribadia of Excello Circuits, and Pete Starkey, I-Connect007 technical editor.
You can view other titles in the I-007eBooks library here.
Share on:
Suggested Items
Happy’s Tech Talk #10: Optical Alignment/Coupon Welding for Stackups
08/02/2022 | Happy Holden -- Column: Happy’s Tech TalkIn this month’s column, I will discuss optical alignment for pinless lamination stackup, a topic that complements the induction lamination in my November 2021 column. Pin tooling plates have been used for lamination since it first started sometime in the 1960s. I first encountered multilayer stackup when I was assigned to increase capacity for our multilayer output in 1972. This was to accommodate the growth of our computer business. Unfortunately, the explosive growth of our calculator orders in 1973 required that we look for numerous vendors to produce the six-layer logic board in the HP-35 calculator.
Mentor Webinar: PADS Designer Tips and Tricks
06/27/2019 | Mentor, a Siemens businessRegister now for this free webinar, scheduled for July 11. In this webinar, attendees will go through the steps involved in setting up PADS Designer for either the netlist flow or integrated flow, and some tips and tricks for existing users.
Flexible Bipolar Plates Made of Polymers Make It Possible to Build Compact Batteries
01/25/2019 | Fraunhofer IISBWhether used for power supply or in electric cars, current battery systems are based on a series of interconnected individual cells, which has certain disadvantages in terms of efficiency and manufacturing. Bipolar battery setups, in contrast, comprise compact stacks of individual cells.
An Insect-Inspired Drone Deforms Upon Impact
07/26/2018 | EPFLAn origami-like drone developed at EPFL is flexible enough to absorb shocks without breaking before returning to its initial shape. This new type of drone, which was inspired by insect wings, draws on the advantages of both stiff and flexible structures.
A Paperlike LCD -- Thin, Flexible, Tough and Cheap
03/29/2018 | AIP.orgOptoelectronic engineers in China and Hong Kong have manufactured a special type of liquid crystal display (LCD) that is paper-thin, flexible, light and tough.