-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueAdvanced Packaging and Stackup Design
This month, our expert contributors discuss the impact of advanced packaging on stackup design—from SI and DFM challenges through the variety of material tradeoffs that designers must contend with in HDI and UHDI.
Rules of Thumb
This month, we delve into rules of thumb—which ones work, which ones should be avoided. Rules of thumb are everywhere, but there may be hundreds of rules of thumb for PCB design. How do we separate the wheat from the chaff, so to speak?
Partial HDI
Our expert contributors provide a complete, detailed view of partial HDI this month. Most experienced PCB designers can start using this approach right away, but you need to know these tips, tricks and techniques first.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
iNEMI End-of-Project Webinar: Connector Reliability Test Recommendations
February 23, 2024 | iNEMIEstimated reading time: 1 minute
The iNEMI Connector Reliability Test Recommendations Project, Phases 1 through 3, addressed the need for a standardized reliability evaluation method for connectors. Existing connector reliability testing standards do not address the full range of connector applications nor have the necessary detailed, defined test conditions and sequences required. The project was driven by the need for a more complete understanding of a component’s reliability to determine whether it could potentially have more uses/applications than it was initially designed and tested for, particularly if additional data shows the component can be used in harsher environments.
Phase 1 defined levels of interconnect (connector level) and recommended a physics of failure test approach. In Phase 2 the team defined a set of stress levels and specific test conditions to use when evaluating connector performance.
The Phase 3 team modified the methodology defined in Phase 2 and applied it to two types of connectors: USB-C and SP3 socket. The intention of the modified testing methodology was to perform “tests to failure” to allow reliability estimates to be calculated. This end-of-project webinar will review the development of the test cycles for the connector types addressed, discuss the actual testing and results, plus identify lessons learned and possible next steps.
Registration
This webinar is open to industry; advance registration is required. Two sessions are scheduled (with the same content). If you have any questions or need additional information, please visit iNEMI's website.
Session 1: Asia
Tuesday, February 27
10:00-11:00 a.m. CST (China)
9:00-10:00 p.m. EST (US) on February 26
Session 2: US & Europe
Tuesday, February 27
11:00 a.m. — 12:00 p.m. EST (US)
5:00-6:00 p.m. CET (Europe)
Suggested Items
Würth Elektronik Expands Its FPC Connector Family
10/30/2024 | Würth ElektronikThe selection of connectors for flat flexible cables (FFC) and flexible printed circuits (FPC) from Würth Elektronik is getting even larger.
iNEMI Connector Footprint Tolerance End-of-Project Webinar
10/24/2024 | iNEMIiNEMI’s PCB Connector Footprint Tolerance Project investigated industry capability, risks and mitigation strategies associated with high-bandwidth I/O connector footprints.
Quectel Introduces New 5G, 4G, Wi-Fi and LoRa IoT Antennas
10/10/2024 | BUSINESS WIREQuectel Wireless Solutions, a global IoT solutions provider, today announces the launch of a series of new antennas to further expand the global antenna offering for Quectel customers.
iNEMI Announces End-of-Project Webinar for PCB Connector Footprint Tolerance Project
09/23/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) is hosting an end-of-project webinar to showcase the findings of its PCB Connector Footprint Tolerance Project.
Mobix Labs Launches New Family of Filtered D-Sub Connectors for Defense, Aerospace, Medical, and Commercial Applications
08/12/2024 | BUSINESS WIREMobix Labs Inc., a leader in advanced connectivity solutions, today introduced a new family of filtered D-sub connectors designed to eliminate unwanted electromagnetic interference (EMI) in defense, aerospace, medical, and commercial applications. These connectors feature robust construction and superior EMI filtering capabilities, ensuring optimal performance and reliability in the most demanding environments.