Beyond Design: High-speed Rules of Thumb
Global PCB Connections: A Technical Overview of Long-flex Printed Circuit Boards
The Shaughnessy Report: A Handy Look at Rules of Thumb
Impact of the April 3rd Earthquake on Taiwan’s Display Panel Industry Is Expected to Bolster Panel Prices
April 3, 2024 | TrendForceEstimated reading time: 2 minutes
An earthquake with a magnitude of 7.2 occurred off the eastern coast of Taiwan at 7:58 AM on April 3rd. Continuous aftershocks have left most machinery at AU Optronics and Innolux in a state of shutdown. According to the latest investigation by TrendForce, all panel fabs at AU Optronics have suspended operations for inspections and repairs, and recovery efforts are now underway. As for Innolux, most of its fabs have experienced a noticeable impact from the earthquake in terms of equipment operations. The exception is Fab6, where equipment was just slightly affected.
Due to varying conditions across individual fabs, TrendForce estimates that this event will affect at least 1-2 days of production. Assuming the impact of the earthquake lasts for two days, it is projected that 1.2% of the overall production volume (measured in terms of surface area) will be affected. Furthermore, since many, if not most, panel fabs have experienced disruptions, all display application segments are expected to experience a reduction in production volume to some extent.
Given the current strong demand for TV panels, TrendForce projects that the overall capacity utilization rates for AU Optronics and Innolux will rise to 85% and 83%, respectively, in April. However, due to the recent earthquake, there is a possibility of further downward revisions. 以
Considering the supply situations across various application segments, fabs that primarily manufacture TV panels are already operating at near full capacity. Therefore, this earthquake is expected to impact shipments of some TV panels. Previously, TV panel prices were projected to continue rising into April. However, demand for small to mid-sized TV panels has started to weaken. Following the earthquake, TrendForce will continue to monitor the situation to determine if the price rally for small and midsize TV panels will extend into May. Nonetheless, TrendForce believes that the influence of Taiwan-based panel makers on TV panel prices has noticeably waned. Unless local panel fabs are forced to suspend operations for more than a week, the earthquake’s effect on TV panel prices is expected to be limited.
Regarding the market for IT panels, there has been a recent increase in stock-up demand for monitor panels. However, since some fabs have surplus production capacity, it remains to be seen whether this demand can be met as fabs return to normal production following the earthquake. Monitor panel prices have also shown a significant rebound recently. Consequently, TrendForce will continue to monitor the situation to determine whether the rebounding demand and prices, coupled with the impact of the earthquake on overall production capacity, will lead to a stronger price rally.
Regarding NB panels, the demand for them remains fairly weak at this moment, and panel makers have sufficient inventory to cope with this situation. Therefore, the effect of the earthquake on shipments of NB panels is expected to be rather insignificant. On the other hand, demand is expected to gradually pick up for NB panels during the second quarter. For panel makers who are eager to raise prices, the opportunity to push for hikes in NB panel prices by leveraging the impact of the earthquake on overall production capacity will be a major point of observation for the next one to two months.
Share on:
Suggested Items
BOOK EXCERPT: The Printed Circuit Designer’s Guide to... DFM Essentials, Chapter 2
11/14/2024 | I-Connect007 Editorial TeamThe guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter discusses panelization, placing PCBs on manufacturing panels, highlighting features like coupons, borders, and scoring to maximize material utilization and reduce costs, and detailing preferred panel sizes and modifications.
Smartphone Panel Shipments to Dip by 1.7% in 2025, with Chinese Manufacturers’ Share Expected to Exceed 70%
11/13/2024 | TrendForceTrendForce’s latest investigations reveal that while the overall smartphone market is projected to grow by just 3% in 2024, increased demand for refurbishes and second-hand devices is fueling growth in the smartphone panel market. Shipments this year are estimated to grow 6.7% YoY to reach 2.066 billion units.
Automating Test Processes in Modern PCBA Manufacturing
11/12/2024 | Josh Casper, Horizon SalesICT and functional test play critical roles in the electronics manufacturing process. In many cases, these processes are the final line of defense in identifying defects, preventing failures from reaching the end user, and safeguarding a manufacturer's reputation. A growing problem in this area has been the sheer increase in production output from the SMT line. As components get smaller, PCBs will continue shrinking, allowing engineers to design highly panelized products.
TTM’s Grand Opening in Malaysia
11/07/2024 | Marcy LaRont, I-Connect007When I last spoke with Tom Edman, president and CEO of TTM Technologies (TTM), he provided an update about the company’s new high-tech printed circuit board facility under construction in Syracuse, New York, and how the grand opening of a facility in Malaysia is informing TTM’s overall expansion efforts: a cutting-edge facility spread across 27 acres and providing roughly 1,000 jobs. Now, Tom provides more details about the new automated facility, its regional and global impact, and the importance of having both government and industry support.
Altus Sees Growing Interest for Laser Depanelling Solutions
11/04/2024 | Altus GroupAltus Group, a leading distributor of capital equipment in the UK and Ireland, has seen an increasing interest in laser depaneling systems from LPKF in 2024.