-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueRules of Thumb
This month, we delve into rules of thumb—which ones work, which ones should be avoided. Rules of thumb are everywhere, but there may be hundreds of rules of thumb for PCB design. How do we separate the wheat from the chaff, so to speak?
Partial HDI
Our expert contributors provide a complete, detailed view of partial HDI this month. Most experienced PCB designers can start using this approach right away, but you need to know these tips, tricks and techniques first.
Silicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
TTM’s Grand Opening in Malaysia
November 7, 2024 | Marcy LaRont, I-Connect007Estimated reading time: 2 minutes
When I last spoke with Tom Edman, president and CEO of TTM Technologies (TTM), he provided an update about the company’s new high-tech printed circuit board facility under construction in Syracuse, New York, and how the grand opening of a facility in Malaysia is informing TTM’s overall expansion efforts: a cutting-edge facility spread across 27 acres and providing roughly 1,000 jobs. Now, Tom provides more details about the new automated facility, its regional and global impact, and the importance of having both government and industry support.
Marcy LaRont: Tom, tell me about TTM Malaysia.
Tom Edman: TTM Malaysia is a slightly more than 800,000-square-foot building with a single-level production floor, which allows us to incorporate a high degree of automation. For example, we're combining process steps to accommodate automation using inline equipment when and where we can and between process steps as well. We're also using automated guided vehicles (AGVs) to transport panels. Almost everything inside the facility is automated, including the drills and the drill bit sharpening. That might sound mundane, but it is a very important part of the process in terms of keeping the drill points properly calibrated. We have a large facility just above the production floor where we feed chemistry onto the first floor, and we have a sub-basement for taking the waste which delivers the spent water and chemistry to the adjacent waste treatment center for recycling or treatment.
LaRont: Automation is certainly key, so tell me more about the AGVs.
Edman: They move the panels around from the warehouse to the loaders, between the pieces of equipment for each process step, and finally back to the warehouse. You can see these little robots all over the facility.
We incorporated manufacturing execution system (MES) software to dictate their movements. This software runs the shop floor processes and ties into our Oracle® financial system. As we proceed through the ramp-up, this last step toward automation allows us to minimize scrap because we have eliminated manual handling errors.
We have a very long hallway that runs lengthwise throughout the middle of the facility for evacuation purposes. We put in doors with glass panels so visitors can get a good feeling for the entire process. As you move your way through the different process steps, you see drill, plating, test and inspection, and finally return to where you started.
To read this entire conversation, which appeared in the October 2024 issue of PCB007 Magazine, click here.
Suggested Items
RTX's Pratt & Whitney and WZL2 Sign Letter of Intent for F100 Sustainment Work in Poland
11/21/2024 | RTXPratt & Whitney, an RTX business, signed a letter of intent with Wojskowe Zaklady Lotnicze Nr. 2 S.A., also known as WZL2, to explore expanded maintenance repair and overhaul capabilities for increased Polish Air Force needs.
Flexible Circuit Technologies Announces Major Expansion of Capabilities & Resources
11/13/2024 | CNWFlexible Circuit Technologies (FCT), a global design and value add manufacturer of flexible circuits, heaters, and membrane switches based in Minneapolis, MN, announces the opening of FCT-Huizhou.
SIA Applauds CHIPS Act Incentives for Corning and Powerex
11/11/2024 | SIAThe Semiconductor Industry Association (SIA) released the following statement from SIA President and CEO John Neuffer applauding semiconductor manufacturing incentives announced by the U.S. Department of Commerce for Corning and Powerex.
CCI Eurolam Announces Strategic Relocation to New Production Facility in Germany
11/05/2024 | CCI EUROLAMCCI Eurolam Group, a leading supplier to the European electronics industry, is pleased to announce its upcoming relocation of the site in Germany from the historical industrial park in Düren-Birkesdorf to a new, modern state of the art production facility in the Industrial Area Rurbenden in Düren.
SIA Commends Selections for CHIPS R&D Flagship Facilities
11/04/2024 | SIAThe Semiconductor Industry Association (SIA) released the following statement from SIA President and CEO John Neuffer commending the selections for the first two CHIPS for America National Semiconductor Technology Center (NSTC) facilities.