Elementary Mr. Watson: Ensuring a Smooth Handoff From PCB Design to Fabrication
The Shaughnessy Report: Breaking Down the Language Barrier
Connect the Dots: Designing for Reality—Routing, Final Fab, and QC
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
April 5, 2024 | Andy Shaughnessy, I-Connect007Estimated reading time: 3 minutes
Spring has definitely sprung; it was 81 degrees last week in Atlanta, and this week it’s been in the 40s. That’s typical spring weather in Atlanta. My newly cut lawn is looking great, thanks to my “yard guy” Clive.
And now our industry’s trade show season is in full swing. I’m all checked in and heading to Anaheim to cover IPC APEX EXPO next week. There’s a lot going on there this year, especially in PCB design. The number of design-related conference classes continues to grow with each show. That’s a good thing: New designers are entering the workforce, slowly but surely, and many companies are losing their subject matter experts to retirement.
IPC APEX EXPO will be held in Anaheim for the next couple of years. The last time I attended in Anaheim was about 20 years ago, and I never did make it to Disneyland. I’m shooting for some Mouse time this year.
I need to finish packing, so without further ado, here’s my must-reads for this week. I hope to see you in California.
Tim’s Takeaways: The Art of Technical Instruction
Published April 4
Speaking of PCB design, do you have what it takes to be a design instructor? You might. As columnist Tim Haas explains, there’s a need for design instructors, and if you’re constantly doing research and reading the latest white papers, you might be a great candidate for a design instructor. He also provides a few horror stories from his design teaching days. Check it out.
Creators of SMT UHDI Test Board Vehicle Discuss this Important Project
Published April 4
Chrys Shea led the development of the SMT test vehicle a few years ago. As features continued to shrink, the industry saw a need for a UHDI test vehicle, so Chrys and Altium’s David Haboud sprang into action. In this audio interview, they discuss what it took to update the test vehicle to UHDI and why technologists working in UHDI should check it out for themselves.
Global Sourcing Spotlight: Don’t Be Afraid of Global Sourcing
Published April 3
No matter how good things are going, some of us have this nagging suspicion in the back of our minds that there’s another snafu waiting around the corner, and another supply chain shutdown probably ranks Numero Uno in that category. But as columnist Bob Duke explains, despite two shooting wars and our stressful relationship with China, global sourcing is not only looking solid—it actually might help bring nations closer together and stave off potential conflicts. As he says, “Business is all about people.”
Checking In With ICAPE Group
Published April 3
ICAPE operates in countries around the globe, from China to South Africa to the U.S., so the company has a pretty broad view of the fab industry. In this interview, ICAPE’s Erik Pedersen explains how they approach sustainability, what sustainability actually entails, and why value engineering is so critical.
IPC APEX EXPO 2024: There’s an App for That
Published April 3
If you’re heading to IPC APEX EXPO, you’ve probably noticed that there are so many classes and “special events” taking place, often at the same time. Make it easy on yourself and scan this handy-dandy APEX QR code, and you’ll be able to see each day’s events at a glance while getting alerts for the events that are most important to you.
Share on:
Suggested Items
Würth Elektronik Now an Infineon ‘Preferred Partner’
03/13/2025 | Wurth Elektronik eiSosWürth Elektronik, one of the leading manufacturers of electronic and electromechanical components, is broadening its collaboration with semiconductor manufacturers.
Elementary Mr. Watson: Ensuring a Smooth Handoff From PCB Design to Fabrication
03/13/2025 | John Watson -- Column: Elementary, Mr. WatsonAt the 2020 Tokyo Summer Olympics, the U.S. men's 4x100-meter relay team had high hopes of winning a medal. The team comprised some of the fastest sprinters in the world, but something went wrong. In a relay, four runners must smoothly pass their baton to the next runner inside a zone on the track. If a runner drops the baton or it’s passed outside the zone, the team risks disqualification. The U.S. team’s pass between the second and third runner was messy, slowing them down. By the time the last runner received the baton, the team had lost too much time. They finished sixth in their heat and didn’t qualify for the final.
Ventec International Group Announce Launch of VT-47LT IPC4101 /126 Prepreg for HDI
03/12/2025 | Ventec International GroupVentec International Group announce launch of VT-47LT IPC4101 / 126 Prepreg. Are Microvia Failures Plaguing Your HDI Any Layer Designs? High-density interconnect (HDI) designs are pushing the envelope - higher layer count HDI relies on complex microvia designs: skip vias, staggered microvias, and stacked microvias in sequential laminations.
TI Introduces the World's Smallest MCU, Enabling Innovation in the Tiniest of Applications
03/12/2025 | PRNewswireTexas Instruments (TI) introduced the world's smallest MCU, expanding its comprehensive Arm® Cortex®-M0+ MSPM0 MCU portfolio. Measuring only 1.38mm2, about the size of a black pepper flake, the wafer chip-scale package (WCSP) for the MSPM0C1104 MCU enables designers to optimize board space in applications such as medical wearables and personal electronics, without compromising performance.
Speaking the Same Language as Your Fabricator
03/12/2025 | Andy Shaughnessy, Design007 MagazineWe do indeed have a failure to communicate; designers and fabricators often seem to be talking past each other, which can lead to jobs being put on hold. We asked Jen Kolar, VP of engineering for Monsoon Solutions, and columnist Kelly Dack to share their thoughts on ways that we can break down the communication barrier between design and fabrication. As they point out, a design kickoff checklist and a solid review process can be invaluable tools in a designer’s toolbox.