-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueThe Rise of Data
Analytics is a given in this industry, but the threshold is changing. If you think you're too small to invest in analytics, you may need to reconsider. So how do you do analytics better? What are the new tools, and how do you get started?
Counterfeit Concerns
The distribution of counterfeit parts has become much more sophisticated in the past decade, and there's no reason to believe that trend is going to be stopping any time soon. What might crop up in the near future?
Solder Printing
In this issue, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - smt007 Magazine
CTEK Shares Tips to Avoid a Dead Battery in Summer Heat
July 26, 2024 | PRNewswireEstimated reading time: 4 minutes
The United States has seen record heat and it doesn't look like it will end anytime soon. As the heat intensifies, it's not just our bodies that need extra care and attention; CTEK says our vehicle batteries also require special consideration to ensure optimal performance and reliability. With scorching temperatures and extended road trips on the horizon, it's important to understand the unique charging needs of your vehicle battery in the extreme heat.
Temperature always plays a significant role in the life expectancy and performance of 12V batteries. Exposing a 12V battery to high temperatures, such as those experienced this summer, can lead to accelerated aging. Heat increases the rate of chemical reactions inside the battery, causing the electrolyte to evaporate more quickly and accelerating internal corrosion.
"It's a common misconception that 12V batteries last longer in warm weather than they do in the cold, believe it or not it's actually the opposite," says Bobbie DuMelle, President, CTEK North America. "Batteries rely on chemical reactions to produce and store electrical energy. The rate of discharge is higher with heat, that means we need to charge more often."
Temperature compensation will reduce charge going into the battery to protect against over-heating the battery that can cause something called desiccation: If a battery becomes overcharged, due to too high voltage being used during the charging cycle, the battery loses water due to evaporation. As a result of this, the batteries charging plates become exposed and begin to dry out, causing permanent and irreparable damage.
In the summer, a vehicle will probably be able to start even if the battery is discharged. Drivers will falsely believe the battery is doing okay when in reality, it's dying. When a vehicle battery falls below 12.4V the sulphation process begins, and drivers won't notice it until it's too late.
CTEK has some top tips to help maintain your 12V vehicle's performance, reliability, and safety during the hot weather conditions.
- Check the battery. Hot weather puts a strain on your battery, so it's essential to check its condition. Prolonged exposure to high temperatures can significantly shorten the overall lifespan of a 12V battery. It can lead to internal damage, increased self-discharge, and a decline in the battery's ability to hold a charge over time. Regularly checking the battery's condition and addressing any issues instantly can help ensure reliable starting power and prevent unexpected breakdowns.
- Understand how heat affects your battery: As temperatures outside heat up, so does the temperature under the hood of your car, truck, or SUV. This creates an atmosphere that can be harmful to your battery. This built-up heat can increase the chances of battery failure, as corrosion can speed up and intensify. In addition, water inside the battery in the form of electrolytes can evaporate. Battery related service calls tend to increase over the summer months for these very reasons.
- Be sensitive to changes. Be aware of any changes in the way your car starts, or the operation of the electrical system in general. Do the lights dim considerably when you try to start the car? Does the starter seem to be turning slower than normal? Any changes can indicate a weak battery or problems in the electrical system.
- Charge before you go. Make sure your battery is fully charged and in tip-top condition before you leave home. Driving around in your vehicle will only ever charge your battery to around 80 percent capacity so, to top it up to 100 percent, you'll always need an efficient battery charger. When plugged into the outlet or another power source, a smart battery charger like CTEK's MXS 5.0 will check how much charge you have in your battery and get you fully charged for your trip.
- Carry emergency supplies: Traveling off-grid during the summer can be wonderful, until breakdowns happen! Prepare for any unforeseen situations by keeping emergency supplies in your vehicle. These may include a spare tire, a portable battery charger and adaptive booster like the CTEK CS FREE®, flashlight, extra water, and a first aid kit. CTEK's CS FREE® is a portable adaptive booster that can start a dead battery in only 15 minutes, without damaging your vehicle's sensitive electronics. It's actually a 4-in-1 unit that is a portable battery charger, smart maintainer, adaptive booster and a hi-tech power bank!
- Time to Replace Your Battery — Depending on where you live, how you drive and how you look after your battery, the lifespan of your vehicle battery could be greatly impacted one way or another. Extreme temperatures, frequent short trips and general everyday use could shorten the life of your battery to as little as two-three years, or the lifespan could be tripled by proper battery care. Pay attention to all the proactive ways you can prolong your battery life, and you could save time, money and the hassle of a dead battery at the most inopportune time.
- Invest in a Battery Charger/Maintainer — Charging your battery at least once a month prolongs its life up to three times, turning regular battery maintenance with a reliable battery charger into a smart routine for savvy motorists. When you consider that battery failure can damage or compromise a vehicle's electronics, a charger makes a worthwhile investment for the long haul. The MXS 5.0 Charger/Maintainer from CTEK has an automatic temperature sensor to ensure the duration and rate of charge is exactly the amount needed. The MXS 5.0 with built-in functionality for both maintenance and troubleshooting offers a patented technology that can recondition your battery and remove sulphation to restore battery health for greater longevity and efficiency.
Suggested Items
Foxconn Strengthens Solid-State Battery Investment, Eyes Two-Wheeler Market as Testing Ground
11/12/2024 | TrendForceHon Hai subsidiary Foxconn has recently established Foxconn New Energy Battery (Zhengzhou) Co., Ltd. in Henan, China. The newly formed company will focus on battery manufacturing, sales, and R&D into automotive components.
Renesas Collaborates with Intel on Best-in-Class Power Management Solution for New Intel Core Ultra 200V Series Processors
10/24/2024 | RenesasRenesas Electronics Corporation, a premier supplier of advanced semiconductor solutions, today announced a collaboration with Intel resulting in a power management solution that delivers best-in-class battery efficiency for laptops based on the new Intel® Core™ Ultra 200V series.
Indium to Showcase Industry-Leading Solder Paste and Alloy Technology at Detroit Battery Show
10/01/2024 | Indium CorporationAs one of the leading materials providers to the electronics assembly industry, Indium Corporation® is proud to feature its industry-leading Durafuse® solder technology at the Battery Show North America, October 7-10, in Detroit, Michigan.
Aismalibar to Showcase Thermal Management Solutions for EV Battery Systems at The Battery Show North America 2024
09/27/2024 | AismalibarAismalibar, a leader in innovative thermal management materials, will be presenting its newest solutions for electric vehicle (EV) battery systems at The Battery Show North America from October 7-11, 2024. Located at Huntington Place, Detroit, MI, Aismalibar will exhibit at booth 6231, unveiling a range of cutting-edge Thermal Interface Materials (TIMs) designed to improve the safety, performance, and longevity of EV batteries.
Biden-Harris Admin Unveils $3B for Battery Manufacturing, 12,000 Jobs, and National Security
09/23/2024 | U.S. Department of EnergyAs part of the Biden-Harris Administration’s Investing in America agenda, the U.S. Department of Energy (DOE) announced over $3 billion for 25 selected projects across 14 states to boost the domestic production of advanced batteries and battery materials nationwide.