Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Suggested Items

Bransys Acquires Two REHM VisionXP+ Nitro 3850 Reflow Ovens

10/14/2024 | Bransys
Bransys Group, a leading provider of comprehensive PCB design and assembly services, is pleased to announce the addition of two REHM VisionXP+ Nitro 3850 Type 834 reflow ovens to its state-of-the-art manufacturing facility.

Jabil Acquires Mikros Technologies

10/03/2024 | BUSINESS WIRE
Jabil Inc., a global leader in design, manufacturing, and supply chain solutions, announced the successful acquisition of Mikros Technologies LLC, a leader in the engineering and manufacturing of liquid cooling solutions for thermal management, completed October 1.

NVIDIA Blackwell Platform and ASIC Chip Upgrades to Boost Liquid Cooling Penetration to Over 20% in 2025,

09/23/2024 | TrendForce
TrendForce’s latest reports reveal that the launch of NVIDIA’s Blackwell platform, expected in 4Q24, is set to significantly drive the adoption of liquid cooling solutions. Liquid cooling penetration is projected to grow from around 10% in 2024 to over 20% in 2025.

Molex Releases Report on Thermal Management Challenges and Opportunities for I/O Modules

05/22/2024 | PRNewswire
Molex, a global electronics leader and connectivity innovator, has published a report that examines thermal management pitfalls and possibilities as data center architects and operators strive to balance high-speed data throughput requirements with the impacts of growing power density and the need for heat dissipation on critical servers and interconnect systems.

The Chemical Connection: Reducing Etch System Water Usage, Part 1

04/05/2024 | Don Ball -- Column: The Chemical Connection
Water conservation has become an important component of the overall system design for most manufacturing operations today. Changing climate conditions and increasing populations are beginning to strain the freshwater supplies in many areas of the country. As a result, as equipment suppliers, we see an increasing number of requests for options that reduce water usage in proposed wet processing systems. Etching systems tend to use more water because of the need for close temperature control to maintain steady etch rates and the rinsing requirements for complete removal of corrosive etchants from the surface of the product before the next process step. This column contains some simple suggestions for reducing water usage in etch systems that won’t strain the budget too much.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in