-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSilicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
Cost Drivers
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value.
Mechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
From Concept to Reality: Building Alpha Circuit
August 14, 2024 | Barry Matties, I-Connect007Estimated reading time: 2 minutes
You’ve just sold your pharmaceutical business and have a lot of extra cash. Where would you spend it? “On a new 45,000-square-foot factory to manufacture high-tech printed circuit boards,” said one man.
Meet Prashant Patel, one of the industry’s newest PCB fabricators. Prashant was a pharmacist for his entire career and did very well. Surrounded by friends with decades of PCB industry experience who willingly shared their outlook on the industry, Prashant decided to acquire Alpha Circuit in Elmhurst, Illinois, in 2021. Alpha Circuit was established in 1981, where the primary focus had been on low-tech. That has all changed.
Prashant and his team broke ground on a new 45,000-square-foot building in Schaumburg, Illinois—meaning this factory was being built from the ground up. Keep in mind that Prashant had no experience in PCB fabrication and had to learn everything, literally, from the ground up. After spending a few hours with him, it’s easy to see he is a good student.
The following interview highlights Prashant's PCB journey.
Barry Matties: We’re here at Alpha Circuit’s brand-new facility, a project that has taken three and a half years. Prashant, tell us about the journey of setting up this new facility. Why did you undertake it this way, and how was the process of bringing it together?
Prashant Patel: I wanted to do something in the manufacturing industry, where I have an extensive network of friends and family. We purchased this building, and everything other than the four walls is brand new, including the flooring, lights, HVAC, roof, and equipment.
We did the factory floor layout and sourcing of equipment ourselves. With over 25 years of experience and expertise in the industry, our engineering team knew what they were looking for. You have to know the right questions to ask for each process. If it’s a wet process, how do we want the nozzles? How do we want the angles? How do we want the brushes? They are the experts, so I let them define exactly what we wanted and needed. My part was to find the manufacturers that could give us the best equipment that met all our requirements, including what kind of service they would offer. How soon can a technician get to you if something is not working? Service was the second most important consideration. After those two variables, it was lead time. When could we get the equipment? What can we live with, and what can't we live with?
Matties: You bought the nearby Alpha Circuit facility in Elmhurst in January 2021 and then started building this. Are you building this facility so that you can offer high-tech, leading-edge products that will be built here?
Patel: This new facility is almost 46,000 square feet compared to our other location, which is about the same size. Yes, this new facility is meant for more high-tech work—smaller lines and spacing, smaller BGAs. The new equipment we have can do all of it.
To read this entire conversation, which appeared in the July 2024 issue of PCB007 Magazine, click here.
Suggested Items
Eutect Overcomes Panel Soldering Challenges with New Gripper
09/06/2024 | Eutect GmbHThe selective soldering of assemblies in panels is not a real challenge. However, if you need to solder relatively large panels with towering components, specialists like those at Eutect GmbH have to step up to the plate.
Bachmann Electronic Opens a Branch in Norway
09/05/2024 | BachmannThe Austrian company Bachmann electronic, which specializes in automation technology for maritime applications, renewable energies, and industry, is expanding its international footprint with a new branch in Norway.
Dan Beeker: Outstanding in his ‘Fields’
09/05/2024 | Andy Shaughnessy, Design007At PCB East, I met with Dan Beeker, technical director at NXP Semiconductor, and a speaker at the conference. Dan always gives a spirited interview, so I asked him to discuss his class and challenges in the industry today.
Young Professionals Spotlight: Process Engineer Kevin Dial, American Standard Circuits
09/05/2024 | Dan Beaulieu, D.B. Management GroupWhen I heard that my friends at American Standard Circuits had hired a new, fresh-out-of-college process engineer, I was anxious to meet him. Now, you get to read this interview. It’s a rare perspective of a young man new to our industry.
Intel Unlocks New Laptop Efficiency with Speed
09/04/2024 | IntelThe laptop improvement people ask for the most – you can probably guess – is better battery life. Nobody enjoys hunting for power outlets in airports.