Beyond Design: High-speed Rules of Thumb
Global PCB Connections: A Technical Overview of Long-flex Printed Circuit Boards
The Shaughnessy Report: A Handy Look at Rules of Thumb
Advancements in Drill Bit Technology
August 29, 2024 | Marcy LaRont, PCB007 MagazineEstimated reading time: 1 minute
In this interview with Alex Girardot of Perfect Point Precision Carbide Tools, we explore the pioneering advancements in drill bit technology supporting high-tech fabrication. Alex leverages his 15 years of expertise in the PCB industry to discuss the critical role of coating technology in enhancing drill bit performance. This technological leap increases accuracy, especially in high aspect ratio builds, and nearly eliminates drill bit breakage. Perfect Point's innovative approach includes a hybrid flute design and active collaboration with customers to optimize their drilling processes through automation and tailored guidance. The discussion also highlights the challenges of working with exotic materials and compares diamond-coated to carbon-coated drill bits, emphasizing the adaptability required in North American fabrication environments.
Marcy LaRont: Alex, let's start by learning about how you got into the industry and what your company does.
Alex Girardot: I spent 12 years working at a printed circuit board shop in southern California, primarily as a dry process engineer. That shop specializes in multilayer rigid-flex PCBs but also has a varied product mix, which constantly presents a diverse set of challenges when it comes to drilling/routing. From there, I moved to Perfect Point where I serve as a field application engineer. My primary responsibility is to work with our customers’ shops and optimize their drill/rout processes for multiple PCB build types, with the goal of enabling them to tackle high technology builds using our tools.
LaRont: Drilling and drill bit technology have undergone tremendous development. What do you provide, and why is coating technology important?
Girardot: Within the past 10 years, there has been a near-universal switch throughout the industry to a “single flute hybrid” design. The drill starts as a two-flute and transitions to a single-flute. This design has provided improved rigidity, accuracy, and strength when compared to a traditional two-flute drill bit. These tools have been adopted as the standard by most of our customers.
Recently, we have seen more shops adopt our patented coated tool technology, Carbonite. This has been primarily driven by the increasing complexity of board types, higher aspect ratios, and designs with tighter pitches where pinpoint accuracy is required.
To read this entire article, which appeared in the August 2024 issue of PCB007 Magazine, click here.
Share on:
Suggested Items
TTM’s Grand Opening in Malaysia
11/07/2024 | Marcy LaRont, I-Connect007When I last spoke with Tom Edman, president and CEO of TTM Technologies (TTM), he provided an update about the company’s new high-tech printed circuit board facility under construction in Syracuse, New York, and how the grand opening of a facility in Malaysia is informing TTM’s overall expansion efforts: a cutting-edge facility spread across 27 acres and providing roughly 1,000 jobs. Now, Tom provides more details about the new automated facility, its regional and global impact, and the importance of having both government and industry support.
Partial HDI: A Delicate Balance
10/30/2024 | I-Connect007 Editorial TeamPartial HDI can be the perfect solution for designers faced with escape routing from tight-pitch BGAs. But there are a variety of material, signal integrity, and DFM trade-offs to understand before you get fully into partial HDI. We asked Stephen Chavez to explain the fundamentals, as well as the details, of this promising process. Are you using partial HDI?
Excellon Automation to Exhibit at AEMS 2024
09/25/2024 | Excellon AutomationExcellon Automation will be displaying at the Anaheim Electronics and Manufacturing Show on October 2nd and 3rd at the Anaheim Convention Center in Anaheim, California.
Cincoze Rugged Embedded Computers: Driving Innovation in Edge AI Applications
09/12/2024 | BUSINESS WIRERugged embedded computer brand—Cincoze, recognizes the huge application opportunities brought on by the edge AI trend and has five series across two product lines to fully meet the extreme performance, reliability, and environmental adaptability requirements of edge AI applications.
I-Connect007 Editor's Choice: Five Must-Reads for the Week
08/30/2024 | Andy Shaughnessy, Design007 MagazineThere’s a lot going on in our industry right now. As you’ll see in today’s must-reads, there’s even innovation taking place in drill bit development. We also have articles on cutting costs during the design process, as well as a handy guide to each country’s tech sweet spots, and what it takes to thrive in this segment. Don’t miss our ode to the CAM department, which is where the rubber meets the road for every PCB.