-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssuePower Integrity
Current power demands are increasing, especially with AI, 5G, and EV chips. This month, our experts share “watt’s up” with power integrity, from planning and layout through measurement and manufacturing.
Signal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
Gartner Says Worldwide PC Shipments Declined 1.3% in Third Quarter of 2024
October 14, 2024 | Gartner, Inc.Estimated reading time: 2 minutes
Worldwide PC shipments totaled 62.9 million units in the third quarter of 2024, a 1.3% decline from the third quarter of 2023, according to preliminary results by Gartner, Inc. This decline comes after three consecutive quarters of year-over-year growth for the PC market.
“Even with a full lineup of Windows-based AI PCs for both Arm and x86 in the third quarter of 2024, AI PCs did not boost the demand for PCs since buyers have yet to see their clear benefits or business value” said Mikako Kitagawa, Director Analyst at Gartner. “Additionally, the demand for the Windows PC refresh driven by the end of Windows 10 support in 2025 did not fully pick up during the third quarter, partly due to economic challenges in certain regions.
“Despite the year-over-year decline in the third quarter, the PC market is still on a recovery track. At the worldwide level, PC demand will see more uptake toward the end of 2024 and more robust growth in 2025, when the PC refresh will be at its peak.”
There were no changes in the top four vendor rankings compared to the third quarter of 2023. Lenovo, HP, Inc., Apple and Acer experienced year-over-year growth, while Dell and ASUS declined in shipments.
Regional Overview
The U.S. PC market grew 5.6% in the third quarter of 2024, with over 17 million PCs shipped, driven by continued stable macroeconomic conditions.
“The U.S. public sector showed healthy PC demand during the third quarter of 2024 as the government finalized its budget and reached the end of its fiscal year,” said Kitagawa. “The education sector also experienced strong PC demand as many devices purchased during the pandemic reached replacement age. Chromebooks experienced double-digit year-over-year growth, driven by demand from schools.”
HP maintained the top spot in the U.S. PC market based on shipments with 24.8% market share. Dell followed with 23.6% market share.
The EMEA PC market experienced its first quarter of decline after three consecutive quarters of growth, decreasing 1.5%.
“There were temporary hurdles to spending in EMEA in the third quarter of 2024. Political elections during the summer in the UK and France, along with major sporting events, distracted consumers and businesses from spending on technology, especially PCs,” said Kitagawa. “Despite this, the low decline should be viewed as a stabilization of the EMEA PC market rather than a return to longer-term declines.”
The Asia/Pacific market declined 8.5% year-over-year, mainly due to continued weak market demand in China. The PC market in China declined 10% year-over-year primarily due to weakened demand for desktop PCs from government and state-owned enterprises.
Japan recorded its first double-digit year-over-year PC shipments growth in three years. “Although macroeconomic conditions did not stabilize in the third quarter, many companies, especially large businesses, were on time for the PC refresh driven by the end of Windows 10 support in 2025,” said Kitagawa.
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Imec Launches 300mm GaN Program to Develop Advanced Power Devices and Reduce Manufacturing Costs
10/13/2025 | ImecImec, a world-leading research and innovation hub in nanoelectronics and digital technologies, welcomes AIXTRON, GlobalFoundries, KLA Corporation, Synopsys, and Veeco as first partners in its 300mm gallium-nitride (GaN) open innovation program track for low- and high-voltage power electronics applications.
Renesas Powers 800 Volt Direct Current AI Data Center Architecture with Next-Generation Power Semiconductors
10/13/2025 | RenesasRenesas Electronics Corporation, a premier supplier of advanced semiconductor solutions, announced that it is supporting efficient power conversion and distribution for the 800 Volt Direct Current power architecture announced by NVIDIA, helping fuel the next wave of smarter, faster AI infrastructure.
SEMI Reports Global 300mm Fab Equipment Spending Expected to Total $374 Billion Over Next Three Years
10/09/2025 | SEMIGlobal 300mm fab equipment spending is expected to reach $374 billion from 2026 to 2028, SEMI reported today in its latest 300mm Fab Outlook.
Advanced Rework Technology Inspires Students at National Manufacturing Day 2025
10/08/2025 | A.R.T. Ltd.Advanced Rework Technology Ltd. (A.R.T.), a leading independent IPC-accredited training provider, joined forces with Jaltek, a UK-based electronics manufacturer with over 35 years’ experience in designing and producing high-quality electronic products, to deliver hands-on workshops for students during National Manufacturing Day 2025.
I-Connect007 Releases Episode 5 of Groundbreaking Ultra HDI Podcast Series
10/10/2025 | I-Connect007In Episode 5 “Via Structures,” host Nolan Johnson welcomes back John Johnson, Director of Quality and Advanced Technology at American Standard Circuits. Together, they explore the designer’s perspective on UHDI’s impact on via structures, diving into the metallurgy, chemistry, mechanical considerations, and stackup reduction that provide greater design flexibility and fewer constraints than ever before.