Connect the Dots: Designing for Reality—Solder Mask and Legend
Target Condition: Advanced Packaging Technologies—Look Before You Leap
Beyond Design: AI-driven Inverse Stackup Optimization
AIM to Present on High Reliability and Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA South China Expo & Tech Forum
October 18, 2024 | AIMEstimated reading time: 1 minute
AIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA South China Expo & Tech Forum taking place November 6-7 at the Shenzhen World Exhibition & Convention Center in Shenzhen, China. Among other great products, AIM will be highlighting its recently released NC259FPA Ultrafine No Clean Solder Paste.
NC259FPA is a zero-halogen paste engineered for precise print definition with type 6 and smaller alloy powders through stencil apertures less than 150 µm in diameter. Ideal for miniLED, microLED, die attach, micro BGA, and HDI boards, this innovative new product features excellent wetting, high transfer efficiency, high reliability, and high tack force for mass transfer.
In addition, AIM Product Manager, Diego Jiang will be giving a presentation titled High Reliability: The Challenges of Soldering for Extremely Harsh Environments:
High reliability in electronics pertains to the quality of solder joints themselves as well as the electrochemical properties of the flux residue. Key characteristics of reliable solder joints include strength and ductility. These joints are often tested via thermal cycling, drop shock and more. Exact testing requirements are dependent on application. When it comes to flux, industry standards such as IPC and JIS define the electrochemical requirements of flux residues, which is particularly important in no clean processes. This presentation outlines the trends and challenges of high reliability application sin automotive, military & aerospace, and LED sectors. Test data comparing specially formulated high reliability alloys with SAC305 are presented along with a discussion of how key elements of the alloys aid in improved reliability.
To learn more about NC259FPA and to discover all of AIM’s products and services, visit the company at the SMTA South China Expo & Tech Forum November 6-7.
Share on:
Suggested Items
IPC Announces UK Regional Qualification for Hand Soldering Competition
01/02/2025 | IPCIPC invites skilled soldering experts to participate in the UK Regional Qualification for the IPC Hand Soldering Competition (HSC) on February 4-6, 2025, at the Farnborough International Exhibition Centre.
Connect the Dots: Designing for Reality—Solder Mask and Legend
01/02/2025 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we discussed the strip, etch, and strip process. At this point, we have a functioning board, but we still need to protect the PCB from environmental effects and document the circuit components. This brings us to the solder mask and legend phase of production.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.