Global Citizenship: What I’ve Learned About the American PCB Business
Global Sourcing Spotlight: The Best Products to Buy Offshore Through Global Sourcing
Nolan's Notes: The Rise (and Risk) of Data
RTX's Collins Aerospace Develops High-Voltage Power Components for Clean Aviation Project
October 29, 2024 | RTXEstimated reading time: 2 minutes
Collins Aerospace, an RTX business, has completed prototype development of a solid-state power controller and power distribution panel as part of the SWITCH project, supported by the European Union's Clean Aviation Joint Undertaking (Clean Aviation). Following design and production in Nördlingen, the megawatt-class power distribution components will now be shipped to Collins' state-of-the-art electric power systems lab, The Grid, in Rockford, Illinois for system integration testing.
To support hybrid-electric propulsion systems, new high-voltage distribution technologies are required as electric power levels increase from hundreds of kilowatts in today's aircraft, to megawatt levels in the aircraft of the future. For SWITCH, RTX is developing a new hybrid-electric propulsion system that combines two Collins megawatt-class electric motor generators within a Pratt & Whitney GTF™ engine. With the ability to handle increased electric loads, Collins' solid-state power controller and power distribution panel will enable the safe management of high-voltage electricity at altitude throughout the SWITCH hybrid-electric architecture.
"Hybrid-electric aircraft are an integral part of the aviation industry's drive to achieve net-zero carbon emissions by 2050, yet without new, safe high-voltage power distribution systems, they will not fly," said Tino Schuldt, general manager for Collins' Nördlingen facility. "Here in Nördlingen, we're leveraging our decades of experience in power distribution solutions and world-class facility to break new ground in the development of these critical enabling technologies for the next generation of hybrid-electric and all-electric platforms."
"The hybrid-electric propulsion solution is one of the key features offered by the SWITCH consortium to reach the CO2 reduction target of our programme for short-medium range aircraft," said Pierre Durel, project officer for SWITCH. "We are excited to see tangible technology bricks becoming available, representing the significant efforts made by the team to deliver critical items needed to run the ground test demonstrator by the end of Phase 1."
Hybrid-electric propulsion is a central pillar of RTX's sustainable aviation technology roadmap. In addition to SWITCH, RTX is advancing hybrid-electric technologies through multiple demonstrator programs applicable to a variety of future aircraft, including the RTX Hybrid-Electric Flight Demonstrator, STEP-Tech and Airbus PioneerLab.
Collins' solid-state power controller was initially developed as part of a collaboration between the RTX Technology Research Center, Collins and Pratt & Whitney under NASA's Advanced Air Vehicles Program.
The SWITCH project is a collaborative consortium including MTU Aero Engines AG, Pratt & Whitney, Collins Aerospace, GKN Aerospace, Airbus and others. Funded by the European Union under GA no. 101102006 — SWITCH. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or Clean Aviation. Neither the European Union nor the granting authority can be held responsible for them.
Share on:
Suggested Items
Beyond Design: High-speed Rules of Thumb
11/21/2024 | Barry Olney -- Column: Beyond DesignThe idiom “rule of thumb” is often used in electronics design and has its origins in the practice of measuring roughly with one’s thumb. Rules of thumb are easy-to-remember, broadly accurate guides or principles based on practice rather than theory. They are used to help feed our intuition to find a quick solution based on experience. We are often forced to use rules of thumb in PCB design in the absence of expensive analysis tools. We also use them to get quick ballpark figures initially and then fine-tune the numbers with further analysis. We can use rules of thumb as a sanity check to assess whether we are using our tools correctly. In this month’s column, I will present some commonly used and helpful rules for high-speed PCB design.
ASMPT: Highly Flexible Die and Flip-chip Bonder for Co-packaged Optics Production
11/20/2024 | ASMPTThe high-precision AMICRA NANO die and flip-chip bonder has been specially developed for the production of co-packaged optics where which optical and electronic components are integrated in a common housing. With its exceptional process stability and a placement accuracy of ±0.2 μm @ 3 σ, this innovative bonding system is ideally equipped for the communication technology of the future.
SEMI Europe Recognizes Schneider Electric as a Leader in Diversity and Inclusion at SEMICON Europa 2024
11/14/2024 | SEMISEMI Europe and the SEMI European Advisory Council for Diversity and Inclusion announced Schneider Electric as the recipient of the 2023 SEMI Industry Leader in Diversity and Inclusion Award. Frederic Godemel, Executive Vice President, Power Systems and Services at Schneider Electric accepted the award presented at SEMICON Europa 2024 during the SEMI Networking Night Dinner.
Foxconn Strengthens Solid-State Battery Investment, Eyes Two-Wheeler Market as Testing Ground
11/12/2024 | TrendForceHon Hai subsidiary Foxconn has recently established Foxconn New Energy Battery (Zhengzhou) Co., Ltd. in Henan, China. The newly formed company will focus on battery manufacturing, sales, and R&D into automotive components.
Exploring Innovation Through Alternate Metals and Sputtering
11/11/2024 | Marcy LaRont, I-Connect007Dr. Evelyne Parmentier has a PhD in physical chemistry from ETH Zurich. She was born in Luxembourg and is now a proud resident of Switzerland, where she has been part of Dyconex’s R&D engineering team for the past two years. Evelyne gave a presentation at the EIPC Summer Conference titled “Functionalization of Printed Circuit Boards Through Introducing Alternate Metals Through Sputtered Layers,” where she asked her audience, “If there are 93 metals in the periodic table, why are we not using more of them?”