Global PCB Connections: A Field Engineer’s Perspective on the Top 10 Trends to Watch
Target Condition: Designing vs. Inventing
Dana on Data: The Missing AI-NPI Link
iNEMI End-of-Project Webinar: Investigation of AI Enhancement to AOI for PCBA
November 6, 2024 | iNEMIEstimated reading time: 1 minute
Automated optical inspection (AOI) systems are essential in electronic manufacturing for ensuring the quality of printed circuit board assemblies (PCBAs). Traditional AOI systems, however, face significant challenges due to high false call rates and defect escapes, particularly as electronic designs become more complex. The integration of artificial intelligence (AI) has emerged as a promising solution to enhance the capabilities of AOI systems.
Phase 1 of iNEMI’s AI Enhancement to AOI for PCBA Project evaluated and recommended AI technologies for AOI. The project team surveyed the current state of AI and AOI technologies in the industry, established common performance metrics, and prepared test vehicles for subsequent experiments.
The recently completed Phase 2 of the project involved rigorous experimentation using the metrics and test vehicles established in Phase 1 to evaluate and validate the performance of AI-enhanced AOI systems. End-of-project webinars are scheduled on November 12 and 13 to report Phase 2 results and lessons learned. Challenges and future work in adopting AI into AOI will also be discussed.
Registration
These webinars are open to the public; advance registration is required (see links below). Two sessions (with the same content) are scheduled. If you have any questions or need additional information, please contact Haley Fu (haley.fu@inemi.org).
Session 1
Tuesday, November 12, 2024
8:00-9:00 a.m. EST (US)
2:00-3:00 p.m. CET (Europe)
9:00-10:00 p.m. CST (China)
Register for Session 1
Session 2
Wednesday, November 13, 2024
9:00-10:00 a.m. CST (China)
8:00-9:00 p.m. EST (US) on November 12
Register for Session 2
Share on:
Suggested Items
TRI Test Solutions at INNOELECTRO 2025
04/02/2025 | TRIAnytest will join INNOELECTRO 2025, held at BOK Sportcsarnok from April 8 – 10, 2025, to showcase TRI's Test Solution.
IPC APEX EXPO 2025 Review: Shifting My Focus to the Show Floor
04/02/2025 | John Watson, CIDIPC APEX EXPO 2025 marked a significant milestone as it celebrated its 25th anniversary. (Personally, I don’t think it looked a day over 20.) If you didn’t attend this great event, why not? This was my 10th anniversary of attending, and it had a distinctly different feel. There was a celebratory atmosphere as both veterans, like myself, and first-time attendees, were drawn into a celebratory occasion marking the significant milestone of the 25th anniversary.
European Chips Skills Academy Launches ECS Summer School 2025 to Inspire Future Electronics Talent
04/01/2025 | JCN NewswireThe European Chips Skills Academy (ECSA), an EU-funded project coordinated by SEMI Europe, in collaboration with industry partners AENEAS, EPoSS, and INSIDE, has announced the launch of the ECS Summer School 2025.
Real Time with... IPC APEX EXPO 2025: Highlighting Global PCB Trends and Technologies with all4-PCB
04/01/2025 | Real Time with...IPC APEX EXPOAndy Shaughnessy and all4-PCB's Ralph Jacobo discuss global distribution trends in the PCB industry, focusing on new technologies in plasma etching and final inspection. Ralph highlights the importance of IC substrate buildup technology and partnerships in the market.
Do You Have X-ray Vision? SMT007 Magazine April Issue Is No Joke
04/01/2025 | I-Connect007 Editorial TeamAs component packaging continues to evolve, the capability of inspecting through components is crucial. Has X-ray’s time finally come in electronics manufacturing? Join us in this issue of SMT007 Magazine, where we answer this question—and others—to bring more efficiency to your bottom line.