-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueShowing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
All About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
Creating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
IPC Introduces First Standard for In-Mold Electronics
November 18, 2024 | IPCEstimated reading time: 1 minute
IPC announces the release of IPC-8401, Guidelines for In-Mold Electronics. IPC-8401 addresses in-mold electronics (IME) technology, providing industry consensus on guidelines for manufacturing processes, part structures, material selection, and production test methods to integrate printed electronics and components into 3D smart structures.
IPC-8401 is the first of what is expected to be a series of standards that will move beyond the automotive industry and cover IME for smart home products and aviation.
The standard was developed by the D-83A In-Mold Electronics Interconnection Task Group, a group comprised of experts worldwide, led by Paavo Niskala from TactoTek and Iker Arroyo Moso from Eurecat. Niskala says, “The automotive industry has driven the development of IME because it significantly reduces the cost, weight, waste, and energy required to produce vehicle interior parts. Rather than using a PCB in a plastic molding with features interacting with PCB sensors, IME components are integrated directly into the plastic molding, making the manufacturing process more streamlined, sustainable, and efficient.
Key guidelines covered in IPC-8401 include:
- Manufacturing Processes: Introduction to the manufacturing processes involved in producing in-mold electronics.
- IME Part Structure: This defines a standardized IME part structure supporting the design and processing of IME parts for mass production.
- Candidate Materials: Provides material selection criteria and recommendations as industry-adopted practices, covering all materials, including substrates, functional inks, SMT components, SMT adhesives, and injection molding resins.
- Production Test Methods: Defines best practices and criteria for process controls-driven testing throughout the manufacturing processes.
To purchase IPC-8401, visit the IPC Store. To participate in IPC standards development committee meetings like the D-83A In-Mold Electronics Interconnection Task Group, visit the IPC’s committee page.
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Powering Progress: Summer 2025 Community Magazine Now Available
07/22/2025 | Community MagazineIn the new Summer 2025 edition of Community Magazine, members of the Global Electronics Association demonstrate what progress really looks like—through innovation on the factory floor, influence on public policy, and investment in the next generation of engineers.
TRI to Exhibit at SMTA Queretaro Expo 2025
07/16/2025 | TRITest Research, Inc. (TRI), the leading provider of test and inspection systems for the electronics manufacturing industry, is pleased to announce plans to exhibit at the SMTA Querétaro Expo 2025, scheduled to take place on July 24, 2025, at the Querétaro Centro de Congresos y Teatro Metropolitano.
Global PCB Connections: Let the Spec Fit the Board, Not Just the Brand
07/17/2025 | Jerome Larez -- Column: Global PCB ConnectionsIf you’ve ever seen an excellent PCB quote delayed, or worse, go cold because of a single line on the fab print, you’re not alone. Often, that line reads something like, “Use 370HR only,” or “IT-180A required.” These and other brand-name materials are proven performers, but unless your design needs that specific resin system (say, for RF performance, thermal reliability, or stringent CAF resistance), you may inadvertently be holding your job hostage.
IPC Hall of Fame Spotlight Series: Highlighting Lionel Fullwood
07/15/2025 | Dan Feinberg, I-Connect007Many IPC members who have contributed significantly to IPC and our industry have been awarded the IPC Raymond E. Pritchard Hall of Fame (HOF) Award. Though many early HOF members have passed away and are unknown to today’s IPC membership, their contributions still resonate. This special series on IPC Hall of Fame members provides a reminder of who was honored and why. As a bonus, for those who are still around, we get to find out what these talented individuals are up to today.
TRI Unveils New Platform for Diverse Board Sizes
07/14/2025 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, proudly introduces a new size configuration for SPI and AOI Models.