Connect the Dots: Proactive Controlled Impedance
Beyond Design: Radiation and Interference Coupling
Elementary, Mr. Watson: Design Data Packages—Circle of Concern or Circle of Influence?
Successful Pre-acceptance of TSK Schill GmbH Production Line for Moulded Etched Parts
December 16, 2024 | TSK Schill GmbHEstimated reading time: 1 minute
The specialist for horizontal wet systems for the production of printed circuit boards, chemical milling and moulded etched parts, TSK Schill GmbH from Gäufelden-Nebringen, is installing new production systems at one of the leading manufacturers of precision metal parts.
Metaq GmbH, based in Wuppertal, is one of the new customers who rely on the competence and experience of TSK Schill for the comprehensive renewal of their etching technology systems.
In November 2024, a system was installed on schedule that will cover three of the four main production steps. From the preparation of the materials in thicknesses of 0.1 to 1 millimeter to the actual etching process and the post-processing of the parts, the individual modules of the system offer innovative technology and modern production processes.
The client's requirements were clearly defined: very good energy efficiency, a high degree of digitalization and automation, and continuous monitoring of the production process for optimal control of the manufacturing parameters. The TSK Schill team
GmbH has accepted this challenge and will continue to intensively accompany the process of commissioning the plant even after the successful preliminary acceptance.
Thomas Schill, Managing Director of TSK Schill GmbH, thanks Metaq GmbH for the trust it has placed in us and assures his customer Claudia Schemann, Managing Director of Metaq GmbH, of a continued constructive and cooperative cooperation.
Etching technology is a photochemical process for the dimensionally accurate production of metal moulded parts. The precision parts are manufactured with an accuracy of hundredths of a millimeter - without mechanical or thermal stress on the material. The result is burr- and stress-free parts that can be produced quickly and economically thanks to digital tools.
Share on:
Suggested Items
STARTEAM GLOBAL Unveils Innovative Additive Solder Mask Process
06/02/2025 | STARTEAM GLOBALSTARTEAM GLOBAL, a leading PCB manufacturer, has introduced a revolutionary additive solder mask process at its Flero STARTEAM (FST) factory in Italy, leveraging digital inkjet technology to enhance production efficiency and sustainability.
Global Smart Manufacturing Market Size to Reach $787.54 Billion by 2030
06/02/2025 | PRNewswireThe global Smart Manufacturing Market Size is projected to be valued at USD 297.20 billion in 2023 and reach $787.54 billion by 2030, growing at a CAGR of 14.9% according to a new report by The Research Insights.
Axxon-Mycronic Showcases Precision Protection Technologies for Extreme Environments at Space Tech Expo
06/02/2025 | Axxon-MycronicAxxon-Mycronic, a leading, global supplier of innovative and production-ready, dispensing and conformal coating systems, is pleased to announce its participation at the Space Tech Expo USA 2025, taking place June 3-4, 2025 at the Long Beach Convention Center in Long Beach, California. Axxon-Mycronic will be exhibiting in Booth #552.
Uyemura Expands Engineering Team in Great Lakes Region
05/30/2025 | UyemuraAndrew Jin has joined Uyemura’s Engineering Team as Technical Service Engineer for the Midwest. Jin was formerly with Sensient Technologies, Flavors and Extracts Division, where his focus was CO2 emissions and water quality; he also did capital project work with production equipment.
Meyer Burger Shuts Down Solar Module Production, Lays Off 282 Employees in the U.S.
05/30/2025 | Meyer BurgerMeyer Burger Technology AG is forced to stop its solar module production in the U.S., which is still ramping up, due to a lack of funds. On May 29, 2025, all 282 remaining employees at the Goodyear, Arizona, site received their notices of termination. Production with an annual capacity of 1.4 gigawatts was shut down immediately.