-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueDesigning Through the Noise
Our experts discuss the constantly evolving world of RF design, including the many tradeoffs, material considerations, and design tips and techniques that designers and design engineers need to know to succeed in this high-frequency realm.
Learning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
Training New Designers
Where will we find the next generation of PCB designers and design engineers? Once we locate them, how will we train and educate them? What will PCB designers of the future need to master to deal with tomorrow’s technology?
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
Incheon National University Study Pioneers Breakthrough in Wireless Charging Technology
February 21, 2025 | PRNewswireEstimated reading time: 2 minutes
The efficiency of wireless charging systems is limited by power loss occurring due to frequency changes in the resonant circuits that enable power transfer. These necessary modulations reduce electromagnetic interference caused by resonant frequencies on other devices. However, conventional strategies for adapting to changing frequencies are inefficient, cost-prohibitive, and impractical. Now, scientists have designed a resonant tuning rectifier that provides a low-cost, efficient solution to stabilize power delivery in wireless power systems.
Wireless power transfer (WPT) enables device charging without direct physical or wired connections. Resonant circuits are key components of WPT systems that optimize energy transfer from the transmitter to the receiver. In parallel compensated receivers, capacitors balance the inductance of the receiver coil to achieve resonance, reducing circuit impedance, thereby enhancing power transfer.
The electromagnetic fields generated by such receivers can interfere with other electronic devices. Controlling this interference requires modulating the system's operating frequency. However, this modulation creates a mismatch between the modulated and resonant frequencies, severely degrading power output and system efficiency. Current strategies to correct this mismatch rely on additional hardware or complex circuitry, leading to energy loss, complex control settings, and bulkier designs.
In an attempt to find an innovative solution to overcome these challenges, a group of scientists led by Professor Dukju Ahn at Incheon National University, Korea, proposed a resonant tuning rectifier (RTR) for parallel resonant receiver systems. The novel RTR features a minimalist design that synchronizes its operation with the natural rhythm of the system's primary current. "Our RTR does not require extra power components or complex feedback circuitry, rendering it more practical for real-world use," says Prof. Ahn. The study was made available online on May 14, 2024 and was published in Volume 71, Issue 12 of IEEE Transactions on Industrial Electronics on December 01, 2024.
The RTR automatically adjusts effective capacitance to tune the resonant frequency by syncing control signals with the system's current, compensating for differences between intrinsic resonance and modulation periods. Unlike existing methods, it uses a simple sensor coil to extract phase information without impacting performance, eliminating the need for transmitter-receiver communication.
Testing a 2.2 kW prototype for automobile charging showed that the RTR compensates for frequency modulation (80—90 kHz) in 70 ms, maintaining stable power output during misalignment and improving efficiency from 3.5% to 8.1%. Its zero-voltage system optimizes control settings to reduce power loss, offering a simple, cost-effective solution for real-time adaptation and stable power delivery.
"The automatic adjustment of resonant frequency impacts not only wireless charging but also induction heating, plasma generation, and power conversion," explains Prof. Ahn. "With minimal energy loss, high efficiency, stable throughput, a minimalist design, and low system impact, RTR can significantly enhance wireless power system performance," he concludes. As wireless charging becomes more widespread, the proposed RTR offers a promising solution to mitigate existing challenges, making this technology more accessible to everyday users.
Suggested Items
Ansys Strengthens Collaboration with TSMC on Advanced Node Processes Certification and 3D-IC Multiphysics Design Solutions
04/24/2025 | PRNewswireThrough continued collaboration with TSMC, Ansys announced enhanced AI-assisted workflows for radio frequency (RF) design migration and photonic integrated circuits (PICs), and new certifications for its semiconductor solutions. Together,
Google Signs Taiwan’s First Corporate Geothermal Energy Deal in Asia-Pacific
04/23/2025 | I-Connect007 Editorial TeamGoogle announced that it has entered Taiwan’s first corporate geothermal power purchase agreement (PPA) with Baseload Capital to expand access to around-the-clock clean energy in the Asia-Pacific region and beyond.
PTCRB Certification Adds New IoT Chipset Certification Category, Certifies Sony's Altair ALT1350 CTIA Certification
04/23/2025 | PRNewswireCTIA Certification announced the first PTCRB certified IoT chipset, Sony's Altair ALT1350.
Flex Wins Two 2025 PACE Awards for Innovation in Automotive Compute and Power Electronics
04/22/2025 | PRNewswireFlex was named a two-time 2025 Automotive News PACE Award winner at the awards ceremony on April 15, recognized for its industry-leading Jupiter Compute Platform and Backup DC/DC Converter design platforms.
Microchip Completes Radiation-Hardened Power MOSFET Family to MIL-PRF-19500/746 and Achieves JANSF 300 Krad Capability
04/22/2025 | MicrochipThe JANS qualification represents the highest level of screening and acceptance requirements, ensuring the superior performance, quality and reliability of discrete semiconductors for aerospace, defense and spaceflight applications.