STMicroelectronics Details Company-Wide Program to Reshape Manufacturing Footprint and Resize Global Cost Base
April 14, 2025 | STMicroelectronicsEstimated reading time: 4 minutes
STMicroelectronics N.V., a global semiconductor leader serving customers across the spectrum of electronics applications, disclosed further elements of its program to reshape its global manufacturing footprint. This comes as part of the program announced in October 2024 to further strengthen ST’s competitiveness, solidify its position as a global semiconductor leader, and ensure the long-term sustainability of its model as an Integrated Device Manufacturer by leveraging strategic assets globally across technology R&D, design and high-volume manufacturing.
Jean-Marc Chery, President and CEO of STMicroelectronics said: “The reshaping of our manufacturing footprint announced today will future proof our Integrated Device Manufacturer model with strategic assets in Europe and improve our ability to innovate even faster, benefitting all our stakeholders. As we focus on advanced manufacturing infrastructure and mainstream technologies, we will continue to leverage all of our existing sites and bring redefined missions for some of them to support their long-term success. We are committed to managing this program responsibly, according to our long-established values, and exclusively through voluntary measures. The technology R&D, design, and high-volume manufacturing activities in Italy and France will continue to be central to our global operations and will be reinforced via planned investments in mainstream technologies”.
Innovating and scaling up to increase efficiency across manufacturing operations
As innovation cycles shorten, ST’s manufacturing strategy is evolving to accelerate the delivery of innovative, proprietary technologies and products at scale to customers globally, across automotive, industrial, personal electronics and communication infrastructure applications.
The reshaping and modernization of ST’s manufacturing operations aim to achieve two main objectives: prioritizing planned investments towards future-ready infrastructure such as 300mm silicon and 200mm silicon carbide wafer fabs to enable them to reach a critical scale and maximizing the productivity and efficiency of legacy 150mm capabilities and mature 200mm capabilities. In parallel, ST plans to continue to invest in upgrading the technology used across its operations, deploying additional AI and automation for additional efficiency in technology R&D, manufacturing, reliability and qualification processes, with a continued focus on sustainability.
Strengthening ST’s manufacturing ecosystem
Over the next three years, the reshaping of ST’s manufacturing footprint will design and strengthen ST’s complementary ecosystems: in France around digital technologies, in Italy around analog and power technologies and in Singapore on mature technologies. The optimization of these operations aim to achieve full capacity utilization and drive technological differentiation to compete globally. As announced previously, each of ST’s current sites will continue to play a long-term role within the company’s global operations.
Building 300mm silicon megafabs in Agrate and Crolles
The Agrate (Italy) 300mm fab will continue to be scaled up, with the aim to become ST’s flagship high-volume manufacturing facility for smart power and mixed signal technologies. The plan is to double its current capacity to 4,000 wafers per week (wpw) by 2027, with planned modular expansions increasing capacity up to 14,000 wpw, depending on market conditions. As we increase our focus on 300mm manufacturing, the Agrate 200mm fab will refocus on MEMS.
The Crolles (France) 300mm fab will be further cemented as the core of ST’s digital products ecosystem. The plan is to increase capacity to 14,000 wpw by 2027 with planned modular expansions increasing capacity up to 20,000 wpw, depending on market conditions. In addition, we will convert the Crolles 200mm fab to support Electrical Wafer Sorting high volume manufacturing and advanced packaging technologies, hosting activities that do not exist today in Europe. The focus will be on next-generation leading technologies including optical sensing and silicon photonics.
Specialized Manufacturing and Competence Center for Power Electronics in Catania
Catania will continue to serve as a center of excellence for power and wide-bandgap semiconductor devices. The development of the new Silicon Carbide Campus is progressing as planned, with production of 200mm wafers set to begin in Q4 2025, reinforcing ST’s leadership in next-generation power technologies. Our resources supporting Catania’s current 150mm and EWS capabilities will be refocused on 200mm silicon carbide and silicon power semiconductor production, including GaN-on-silicon, reinforcing ST’s leadership in next-generation power technologies.
Optimizing Other Manufacturing Sites
Rousset (France) will remain focused on 200mm manufacturing, with additional volumes reallocated from other sites enabling full saturation of existing manufacturing capacity for optimized efficiency.
Tours (France) will remain focused on its 200mm silicon production line for select technologies, while other activities – including legacy 150mm manufacturing activities – will be transferred to different ST sites, and it will also remain a center of competence for GaN, mainly on epitaxy. The Tours site will also host a new activity: panel-level-packaging, one of the major enablers of chiplets, a technology for complex semiconductor applications that will be key for ST in the future.
Ang Mo Kio (Singapore), ST’s high-volume fab for mature technologies, will remain focused on 200mm silicon manufacturing and will also host our consolidated global legacy 150mm silicon capabilities.
Kirkop (Malta), ST’s high-volume test and packaging fab in Europe will be upgraded, with the addition of advanced automated technologies which will be key to support next-generation products.
Workforce and skills evolution
As ST reshapes its manufacturing footprint over the next three years, the workforce size and required skill sets will evolve. Advanced manufacturing will shift roles from legacy processes involving repetitive manual tasks to a stronger focus on process control, automation, and design. ST will manage this transition through voluntary measures, with a continued commitment to ongoing constructive dialogue and negotiations with employee representatives in accordance with applicable national regulations. Based on current projections, the program is expected to see up to 2,800 people leaving the company globally on a voluntary basis, on top of normal attrition. These changes are expected to occur mainly in 2026 and 2027. Regular updates will be provided to stakeholders as the program progresses.
Suggested Items
Indian Government Establishes Panel for New National Manufacturing Mission
05/14/2025 | I-Connect007The Indian government has set up an inter-ministerial committee to design the primary plan for a new national manufacturing mission, India’s Economic Times reported on May 12.
Koh Young Installs 24,000th Inspection System at Top 20 EMS
05/14/2025 | Koh YoungKoh Young, the global leader in True 3D measurement-based inspection and metrology solutions, proudly announces the installation of its 24,000th inspection system at a Top 20 Global EMS in Thailand.
New Episode of NCAB Podcast Series Explores Cutting-edge Thermal Management Solutions
05/14/2025 | I-Connect007In this episode we continue the conversation with NCAB Field Application Engineer Ryan Miller as we dive into practical design and manufacturing techniques for controlling thermal effects. Topics include via farms, insulated metal substrates, coin technology, and copper pedestals—solutions that help meet today's high-performance demands.
From DuPont to Qnity: A Bold Move in Electronics Materials
05/14/2025 | Marcy LaRont, I-Connect007DuPont has announced the intended spinoff of a public independent electronics company, Qnity, which will serve as a solutions provider to the semiconductor and electronics industries to enhance competitiveness and innovation in advanced computing, smart technologies, and connectivity. In this interview, Jon Kemp, Qnity CEO-elect and current president of DuPont’s Electronics business, shares his insights on the strategic separation from DuPont.
Legislative Update: Is the SEMI Investment Act Inclusive of PCB and Substrates?
05/13/2025 | I-Connect007 Editorial TeamIn response to this week's news about new U.S. legislation being put forth by SEMI to support our domestic electronics supply chain—the Strengthening Essential Manufacturing and Industrial (SEMI) Investment Act—IPC’s Richard Capetto, senior director of North American Government Relations, made the following statement.