Standard of Excellence: Speed vs. Quality in Customer Service
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
Global Sourcing Spotlight: Balancing Speed and Flexibility Without Sacrificing Control
Digital Twin Concept in Copper Electroplating Process Performance
July 11, 2025 | Aga Franczak, Robrecht Belis, Elsyca N.V.Estimated reading time: 1 minute
Editor’s Note: This is an excerpt from a technical paper presented at the inaugural Pan European Design Conference in January 2025. It is reflected as originally presented with minor edits for grammar. There is a link to access the full paper at the conclusion of this excerpt.
Abstract
PCB manufacturing involves transforming a design into a physical board while meeting specific requirements. Understanding these design specifications is crucial, as they directly impact the PCB's fabrication process, performance, and yield rate. One key design specification is copper thieving—the addition of “dummy” pads across the surface that are plated along with the features designed on the outer layers. The purpose of the process is to provide a uniform distribution of copper across the outer layers to make the plating current density and plating in the holes more uniform.
Copper electroplating is crucial in PCB manufacturing, primarily because it reduces ground line impedance and voltage drop. The performance of the electroplating process directly affects the quality of the copper layer and related mechanical properties. In acid copper plating, achieving proper thickness distribution and surface uniformity without compromising metallurgical properties like elongation and tensile strength is challenging. Lowering the current density can help equalize copper thickness but significantly increases plating time, adversely affecting PCB throughput.
Therefore, controlling process performance and the quality of the electroplated copper layer are vital aspects of PCB plating, which remains challenging even for experienced PCB manufacturers. Recognizing plating process performance in terms of copper layer coverage and thickness up front adds significant value to process design and control. This paper explores the concept of automated copper thieving and the digital twin of the copper plating process in PCB manufacturing. These modern CAE tools facilitate the rapid assessment and mitigation of copper under- and over-plated surface areas, aligning closely with the principles of smart manufacturing.
To read the entire paper, which appeared in the June 2025 issue of PCB007 Magazine, click here.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
WestDev Announces Advanced Thermal Analysis Integration for Pulsonix PCB Design Suite
10/29/2025 | WestDev Ltd.Pulsonix, the industry-leading PCB design software from WestDev Ltd., announced a major enhancement to its design ecosystem: a direct interface between Pulsonix and ADAM Research's TRM (Thermal Risk Management) analysis software.
Designers Notebook: Power and Ground Distribution Basics
10/29/2025 | Vern Solberg -- Column: Designer's NotebookThe principal objectives to be established during the planning stage are to define the interrelationship between all component elements and confirm that there is sufficient surface area for placement, the space needed to ensure efficient circuit interconnect, and to accommodate adequate power and ground distribution.
Episode 6 of Ultra HDI Podcast Series Explores Copper-filled Microvias in Advanced PCB Design and Fabrication
10/15/2025 | I-Connect007I-Connect007 has released Episode 6 of its acclaimed On the Line with... American Standard Circuits: Ultra High Density Interconnect (UHDI) podcast series. In this episode, “Copper Filling of Vias,” host Nolan Johnson once again welcomes John Johnson, Director of Quality and Advanced Technology at American Standard Circuits, for a deep dive into the pros and cons of copper plating microvias—from both the fabricator’s and designer’s perspectives.
Nolan’s Notes: Tariffs, Technologies, and Optimization
10/01/2025 | Nolan Johnson -- Column: Nolan's NotesLast month, SMT007 Magazine spotlighted India, and boy, did we pick a good time to do so. Tariff and trade news involving India was breaking like a storm surge. The U.S. tariffs shifted India from one of the most favorable trade agreements to the least favorable. Electronics continue to be exempt for the time being, but lest you think that we’re free and clear because we manufacture electronics, steel and aluminum are specifically called out at the 50% tariff levels.
MacDermid Alpha & Graphic PLC Lead UK’s First Horizontal Electroless Copper Installation
09/30/2025 | MacDermid Alpha & Graphic PLCMacDermid Alpha Electronics Solutions, a leading supplier of integrated materials and chemistries to the electronics industry, is proud to support Graphic PLC, a Somacis company, with the installation of the first horizontal electroless copper metallization process in the UK.