-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSignal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
Showing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
Eltek Ltd. Reports Strong Second-Quarter 2025 Results
August 14, 2025 | PR NewswireEstimated reading time: 4 minutes
Eltek Ltd., a global manufacturer and supplier of technologically advanced solutions in the field of printed circuit boards (PCBs), today announced its financial results for the quarter ended June 30, 2025.
Second Quarter 2025 Highlights
Q2 2025 | Q2 2024 | % | |
Revenues (*) | $12.5 million | 10.5 million | +20% |
Gross margin | 24.1 % | 15.6% | +8.5% |
Operating income | $1.5 million | $0.4 million | +259% |
Financial income (expense) | $(1.0) million | $0.5 million | n/m |
(*) Revenues for the six months ended June 30, 2025 totaled $25.3 million, up 14%
from $22.2 million in the 2024 period.
Eli Yaffe, Chief Executive Officer, stated: "Strong momentum across our defense and medical segments drove significant year-over-year growth, highlighted by double-digit revenue increases. Continued operational improvements and a favorable product mix (compared to Q2 2024) contributed to a substantial increase in gross margin and operating profit, which reached $1.5 million - more than triple the amount recorded in the same period last year.
We remain committed to expanding our production capacity. All the equipment that was delivered to date has been successfully installed and is performing in accordance with specifications. Construction to accommodate the core of our investment plan - the new 60-meter coating lines is progressing smoothly, on schedule, and without any material impact on ongoing production operations. Following a recent scheduling update from our coating lines supplier, we have been informed of an additional delay in the delivery of the first line. We now expect the first line to arrive at our facility toward the end of 2025.
With staffing up approximately 10% since January, we continue our efforts to meet growing demand while maintaining best-in-class lead times.
The sharp appreciation of the Israeli shekel during the quarter resulted in a non-cash financial expense of $1.0 million. Given that the majority of our revenues are denominated in U.S. dollars, we have proactively updated our pricing model to better align with our NIS-based expenses. The impact of the currency fluctuation will be reflected in future customer orders, helping to protect our margins moving forward."
Second Quarter 2025 GAAP Financial Results
Revenues for the second quarter of 2025 were $12.5 million compared to $10.5 million in the second quarter of 2024.
Gross profit for the second quarter of 2025 was $3.0 million (24% of revenues) compared to $1.6 million (16% of revenues) in the second quarter of 2024.
Operating profit for the second quarter of 2025 was $1.5 million compared to operating profit of $0.4 million in the second quarter of 2024.
Financial expenses for the second quarter of 2025 were $1.0 million compared to financial income of $0.5 million in the second quarter of 2024. Financial expenses primarily resulted from the 9% erosion of the U.S. dollar against the NIS.
Net income for the second quarter of 2025 was $0.4 million or $0.05 per fully diluted share compared to net income of $0.8 million or $0.11 per fully diluted share in the second quarter of 2024.
Second Quarter 2025 Non-GAAP Financial Results
EBITDA for the second quarter of 2025 was $2.0 million (15.6% of revenues) compared to EBITDA of $0.8 million (7.6% of revenues) in the second quarter of 2024.
Six Months Ended June 30, 2025 GAAP Financial Results
Revenues for the first six months of 2025 were $25.3 million compared to $22.2 million in the first six months of 2024.
Gross profit for the first six months of 2025 was $5.2 million (21% of revenues) compared to $4.9 million (22% of revenues) in the first six months of 2024.
Operating profit for the first six months of 2025 was $2.2 million compared to operating profit of $2.1 million in the first six months of 2024.
Financial expenses for the first six months of 2025 were $0.5 million compared to financial income of $0.8 million in the first six months of 2024. Financial expenses primarily resulted from the erosion of the U.S. dollar against the NIS.
Net profit for the first six months of 2025 was $1.4 million or $0.20 per fully diluted share compared to net profit of $2.5 million or $0.38 per fully diluted share in the first six months of 2024.
Six Months Ended June 30, 2025 Non-GAAP Financial Results
EBITDA for the first six months of 2025 was a $3.1 million (12% of revenues) compared to EBITDA of $2.9 million (13% of revenues) in the first six months of 2024.
About our Non-GAAP Financial Information
The Company reports financial results in accordance with U.S. GAAP and herein provides EBITDA, a non-GAAP measure. This non-GAAP measure is not in accordance with, nor is it a substitute for, GAAP measures. This non-GAAP measure is intended to supplement the Company's presentation of its financial results that are prepared in accordance with GAAP. The Company uses the non-GAAP measure presented to evaluate and manage the Company's operations internally. The Company is also providing this information to assist investors in performing additional financial analysis. Reconciliation between the Company's results on a GAAP and non-GAAP basis is provided in a table below.
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
New Podcast Episode: How Does UHDI Benefit SWaP?
10/01/2025 | I-Connect007In podcast episode 4, “SWaP Considerations,” host Nolan Johnson welcomes back industry expert John Johnson, Director of Quality and Advanced Technology at American Standard Circuits (ASC). Together, they explore how UHDI delivers measurable advantages in size, weight, and power (SWaP)—unlocking new possibilities in speed, efficiency, and miniaturization.
October 2025 SMT007 Magazine: Upgrading Your Production Software
10/01/2025 | I-Connect007 Editorial TeamEMS companies need advanced software systems to thrive and compete. But these systems require significant effort to integrate and deploy. What is the reality, and how can we make it easier for everyone? The October 2025 issue of SMT007 Magazine investigates business operations software and how best to achieve the necessary integrations.
Federal Electronics Successfully Completes AS9100 and ISO 9001 Surveillance Audit at Cranston Headquarters
09/30/2025 | Federal ElectronicsFederal Electronics, a leader in providing advanced electronic manufacturing services, announced the successful completion of its annual AS9100 and ISO 9001 surveillance audit at its headquarters in Cranston, Rhode Island.
IEMI 2026 in Bengaluru: Shaping the Next Era of Electronics
10/01/2025 | Arpita Das, Global Electronics AssociationIntegrated Electronics Manufacturing & Interconnections (IEMI) 2026, Jan. 29–30, at Taj Yeshwantpur, Bengaluru, builds on the success of IEMI 2024, which took place in both Kuala Lumpur and Bengaluru and attracted over 1,200 participants. From smart factory showcases to IPC-certified soldering competitions, it was a platform for knowledge exchange and technical engagement.
Federal Electronics Enhances Hermosillo Operations with Installation of Mycronic MyPro S30 Stencil Printer
09/29/2025 | Federal ElectronicsFederal Electronics, a leader in providing advanced electronic manufacturing services, has expanded its production capabilities with the installation of a new Mycronic MyPro S30 Stencil Printer at its Hermosillo facility.