-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSignal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
Showing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
Strategies for Improving PCB Procurement
July 23, 2015 | Barry Matties, I-Connect007Estimated reading time: 5 minutes

The PCB procurement process has certainly changed over the years. Some people are happy buying a board from a website, but for others the demands are different. Russ Adams should know; he’s the sales manager for Prototron Circuits, a PCB fabricator that has been in business for nearly 30 years, with facilities in Redmond, Washington, and Tucson, Arizona. I recently met up with Adams to discuss customers’ evolving requirements, along with his ideas for lowering the total procurement cost.
Barry Matties: Russ, what sorts of demands are customers putting on you these days?
Russ Adams: Primarily, it's time. Time has always been the big demand. We're in the business of selling time. That's really been what we've been all about.
Matties: Do customers require audits of your facility?
Adams: Some do, and some don't. The smaller folks typically do not. The high-reliability folks, yes.
Matties: What are they looking for when they come through?
Adams: They are looking for quality systems. It's interesting. You would think that they'd want to see shiny floors and that kind of thing, but the smart people will actually go in there and talk to people. We're blessed. We all know what we're doing inside and out.
When a customer comes into our facility, one of the things that they're most impressed with is that they can talk to anybody, at any time, on any line and get an education on what this process is all about. In an audit, if you walk in with a checklist and say, “Yeah, this is the right color,” I don't think you're really learning what the shop's culture is and how reliable they are. You can put together a pretty survey, but go out there and talk to the people face to face; that is where you're going to see what happens when the rubber hits the road.
Matties: How many audits might come through in a year or a month?
Adams: It really depends. Being in the prototype end of things, sometimes they kind of turn a blind eye to that. It's just at the engineering level. It’s when we take the next step with the customer, particularly when they go from being able to purchase with credit cards to where they have to use a purchase order and go through purchasing, that we have to get into their system. Then they come out and actually make a site audit. We have had a couple people look at one shop and qualify both. Everybody's just a little bit different in how they do it. Typically, we don't see a lot of site audits from contract manufacturers. It’s mostly OEMs, and mainly high-reliability type people.
Matties: Does concurrent engineering happen with the designers and the fabricators?
Adams: Yes, it does. We tend to encourage our customers to contact our CAM guys in the shop—our engineering folks working with impedances, materials, and dielectrics. We have been able to save a lot of people a lot of grief by having them get in touch with us prior to doing the design, and then if they're going to have us build the boards, learning what our dielectrics are, where they reside in the stack-up and then going forward with the design. Generally, when that comes in we have zero questions to ask. We just launch and run and deliver the boards.
Matties: So, if a designer is taking on a job, the first thing they should do is talk to the PCB manufacturer?
Adams: I would, particularly if it has controlled impedance or anything out of the ordinary. I would think it is good due diligence to contact the fabricator whom you expect to be building it. You need to build a relationship with your shop. You're not in a situation where you're going to get away with having somebody help you up front and do all of your layout work and then take it down the street and have it built. Two or three times doing that and you're not going to get the same kind of love. If you have established a shop that you're comfortable with and you trust, I would bounce everything off of them before you run it. That's just smart. Your time is valuable. Don't waste it.
Matties: What advice would you give to a circuit board procurement person, whether it's an engineer, or whoever is responsible for the total cost of the boards, to lower the costs?
Adams: The only real complaint I hear out there is that engineers feel they need the purchasing people to listen to them. They may have different agendas. The engineering guys are looking for something that's going to work and that they can get quickly. Typically, they're going to look for somebody who, if they have some questions about it, is going to be able to answer them competently. Technically, purchasing is looking for price.
Matties: How do you bridge that gap?
Adams: We try very hard to let the purchasing people know what kind of value we bring to the table, that by placing their eggs in our basket we aren't going to break them. They may be spending 10–15% more than they might with somebody else, but you can almost look at it like an insurance policy. We have made mistakes in our lives but we always make them right. That's been our guiding principle: Deliver it on time and if we screw up, admit it and fix it.
Matties: The advice then to a company that wants to lower their total cost?
Adams: There's a big difference between price and cost. It's about working with each other. That's it in one sentence: Work with each other. If the engineer says "Oh, I need this in 24 hours," you might question “Do you really? Or do you just want it in there so you pad yourself by a day.” We're a shop that if we say it's going to be there in one day, it's going to be there in one day. You don't have to ask for one day figuring it's going to be two. There's that. There is a little bit of a chasm between the engineering department and the purchasing department, and the larger the company, the bigger the chasm. That's why there are so many engineers out there with credit cards nowadays. It just streamlines everything.
Matties: Anything else that a buyer should know in terms of the relationship with the fabricator?
Adams: Just keep the lines of communication as open as possible. Realize that when we call you up with a question it's not because we're trying to bug you or absolve ourselves of some kind of responsibility or anything. We're trying our best to make the very best board for you the first time out, so hopefully you won't have to revise it and do it again.
Matties: Great. Russ, thank you so much.
Adams: Thanks a lot. Good talking to you.
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Electra’s ElectraJet EMJ110 Inkjet Soldermask Now in Black & Blue at Sunrise Electronics
09/08/2025 | Electra Polymers LtdFollowing the successful deployment of Electra’s Green EMJ110 Inkjet Soldermask on KLA’s Orbotech Neos™ platform at Sunrise Electronics in Elk Grove Village, Illinois, production has now moved beyond green.
Magnachip Semiconductor Announces YJ Kim to Step Down as CEO; Current Board Chairman Camillo Martino Appointed Interim CEO
08/14/2025 | PR NewswireMagnachip Semiconductor Corporation today announced that YJ Kim has agreed to step down as CEO and as a member of the Board of Directors, effective immediately. Camillo Martino, Chairman of the Board of Directors, has also been appointed Interim Chief Executive Officer, effective immediately.
Bell to Build X-Plane for Phase 2 of DARPA Speed and Runway Independent Technologies (SPRINT) X-Plane Program
07/09/2025 | Bell Textron Inc.Bell Textron Inc., a Textron Inc. company, has been down-selected for Phase 2 of Defense Advanced Research Projects Agency (DARPA) Speed and Runway Independent Technologies (SPRINT) X-Plane program with the objective to complete design, construction, ground testing and certification of an X-plane demonstrator.
Nolan’s Notes: Moving Forward With Confidence
06/03/2025 | Nolan Johnson -- Column: Nolan's NotesWe’re currently enjoying a revitalized and dynamic EMS provider market with significant growth potential. Since December 2024, the book-to-bill has been extremely strong and growing. Starting with a ratio of 1.24 in December, book-to-bill has continued to accelerate to a 1.41 in April. Yet, there is a global economic restructuring taking place. To say that the back-and-forth with tariffs and trade deals makes for an uncertain market is an understatement. While we may be in a 90-day tariff pause among leading economic nations, the deadline is quickly approaching and that leaves many of you feeling unsettled about what to expect.
Mycronic High Flex Changes Division Name to PCB Assembly Solutions
05/20/2025 | MycronicMycronic AB, the leading Sweden-based electronics assembly solutions provider, announced that its division formerly known as High Flex will now operate under the name PCB Assembly Solutions.