Dan’s Biz Bookshelf: ‘Elevate: Push Beyond Your Limits'
The Marketing Minute: The First Step to More Sales—Marketing
It’s Only Common Sense: Customer Service Is Sales in Disguise
Standards Committee Updates at IPC
November 20, 2015 | IPCEstimated reading time: 5 minutes
The 7-11 Test Methods Subcommittee to review a proposal by Gerard O’Brien, StandS Group, for using XRF to determine phosphorous content in ENIG. There was a discussion of a Validation Process and Method Review for IPC methods. They proposed that the TAEC review all released Test Methods, new and revised. Also proposed that IPC could potentially provide validation for Test Method operators and auditing to ensure proper testing.
The 7-12 Microsection Subcommittee met to continue the revision of IPC-9241, Microsectioning Guideline (formerly MS-810) and review the comments on KAVI. Feedback from the recently released TM 2.1.1F, Microsectioning, Manual Method and a proposed Microsectioning Training course were also discussed.
The D-32 Thermal Stress Test Methods Subcommittee met to discuss the next steps moving forward on the revision of TM 2.6.7.2, Thermal Shock and 2.6.27, Thermal Stress. A PIN is to be drafted and discussed at the next teleconference.
Process Control
The 7-23 Assembly Process Effects Handbook Subcommittee met to discuss the format and content of the new IPC-9111, Troubleshooting for Printed Board Assembly Processes, before going to Final Industry Review.
Product Assurance
The 7-30 Product Assurance Committee reviewed the status of the projects in its scope and started planning for the meetings to be held in APEX 2016.
The 7-31b IPC-A-610 Task Group reviewed comments on IPC-A-610, Acceptability for Electronic Assemblies. The Task Group met a second day to resolve comments on criteria comment to both IPC-A-610, Acceptability for Electronic Assemblies, and IPC J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies. The group also celebrated completion of the forthcoming IPC-A-610 Revision F Amendment 1.
The 7-31bc Telecom Addendum Task Group met to continue discussions on the revision of the document. The Task Group plans to update the addendum using Revision F of IPC-A-610, Acceptability for Electronic Assemblies as the base document.
The 7-31f Task Group responsible for IPC-A-620, Requirements and Acceptance for Cable and Wire Harness Assemblies, met to continue revision work on the document.
The 7-31j Task Group met to continue revising IPC-A-630, Acceptability Standard for Manufacture, Inspection and Testing of Electronic Enclosures. The Task Group also discussed and approved a new title for the standard that will be introduced with the revision.
The 7-31k Wire Harness Design Task Group and 7-31h IPC-HDBK-620 Handbook Task Group met to celebrate the forthcoming IPC-D-620, Design and Critical Process Requirements for Cable and Wiring Harnesses, and to open discussion on IPC-HDBK-620, Handbook and Guide to Supplement IPC-A-620.
The 7-31m Fiber Optic Cable Acceptability Task Group agreed to split the working draft IPC-A-640 into separate standards for design (IPC-D-640) and acceptance (IPC-A-640). Because most of the content for the design document is already on hand, the group will focus first on IPC-D-640, with plans to ballot by APEX/EXPO, and will pick up work on IPC-A-640 near that time, with a goal to publish later in 2016.
The 7-32c Electrical Continuity Task Group met to review industry responses to a survey on adjacency testing for bare printed board electrical test. Additional input on the need to specify a minimum retention period for electrical test data and clarification on when electrical testing for Class 3 product can be agreed upon between user and supplier drove the group to determine that a “B” revision to the IPC-9252, Requirements for Electrical Testing of Unpopulated Printed Boards, should be developed for a 2016 release.
The 7-34 Repairability Subcommittee met to continue revising IPC-7711/21, Rework, Modification and Repair of Electronic Assemblies.
Share on:
Suggested Items
TRI to Exhibit at SMTA Queretaro Expo 2025
07/16/2025 | TRITest Research, Inc. (TRI), the leading provider of test and inspection systems for the electronics manufacturing industry, is pleased to announce plans to exhibit at the SMTA Querétaro Expo 2025, scheduled to take place on July 24, 2025, at the Querétaro Centro de Congresos y Teatro Metropolitano.
Global PCB Connections: Let the Spec Fit the Board, Not Just the Brand
07/17/2025 | Jerome Larez -- Column: Global PCB ConnectionsIf you’ve ever seen an excellent PCB quote delayed, or worse, go cold because of a single line on the fab print, you’re not alone. Often, that line reads something like, “Use 370HR only,” or “IT-180A required.” These and other brand-name materials are proven performers, but unless your design needs that specific resin system (say, for RF performance, thermal reliability, or stringent CAF resistance), you may inadvertently be holding your job hostage.
IPC Hall of Fame Spotlight Series: Highlighting Lionel Fullwood
07/15/2025 | Dan Feinberg, I-Connect007Many IPC members who have contributed significantly to IPC and our industry have been awarded the IPC Raymond E. Pritchard Hall of Fame (HOF) Award. Though many early HOF members have passed away and are unknown to today’s IPC membership, their contributions still resonate. This special series on IPC Hall of Fame members provides a reminder of who was honored and why. As a bonus, for those who are still around, we get to find out what these talented individuals are up to today.
TRI Unveils New Platform for Diverse Board Sizes
07/14/2025 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, proudly introduces a new size configuration for SPI and AOI Models.
Seeing a Future in Mexico
07/09/2025 | Michelle Te, I-Connect007The Global Electronics Association (formerly known as IPC) has been instrumental in fostering a partnership with Guanajuato, a state north of Mexico City with 12 industrial clusters and close to 150 companies involved in electronics. This past spring, Alejandro Hernández, the undersecretary for investment promotion in Guanajuato, attended IPC APEX EXPO 2025 at the invitation of IPC Mexico Director Lorena Villanueva, where he met with several companies to discuss the opportunities available in Mexico. He is inviting electronics-related companies seeking long-term investment in a centrally located area with access to highways, railways, and ports.