Fresh PCB Concepts: PCB Design Essentials for Electric Vehicle Charging
Elementary, Mr. Watson: Rules of Thumb—Guidelines vs. Principles for PCB Design
Beyond Design: High-speed Rules of Thumb
Navigating the Global Materials Supply Chain: A Roundtable Discussion
December 3, 2015 | Andy Shaughnessy, I-Connect007Estimated reading time: 15 minutes
Goodwin: One of the things we've done to properly address that is we very recently set up our own OEM team. We call it an OEM marketing team, but it's about a two-way information flow, not just us marketing our products to the OEM. We really want to know their roadmaps and where they're going. Also you've got to be very careful because a lot of the things you see happening in high-speed digital materials now is that everybody wants a custom laminate product. That puts an immense pressure on the supply chain because small quantities of very special products are very, very difficult to deliver. One of the messages we're sending out there is to try to get people to root their technologies around a product base so we stand a chance to deliver that within the time scales and be as reactive as the OEMs want us to be. I guess you guys are really stuck in the middle of this, aren't you? If we haven't got the products available you can't support the OEMs.
Keuthen: It is like that, definitely. The only chance to deal with this is obviously having a wide variety of products on board to be able to supply our various customers’ needs. That's one thing. On the other hand, we've got products that are not lasting for that long. When you think of the pre-pregs, it’s a three-month time period that we've got, so we are not really able to forecast that long to stock it very long.
Otherwise we have to retest it and that's something in the supply chain that came to my knowledge as well. That we've got a lot of problems getting these materials in time in our house and then have them available for at least three months. After that the expiration date of these materials is also done. That makes our life even more difficult.
Willis: A lot of customers just don't fully understand that these materials do have a shelf life.
Keuthen: That is true.
Willis: They come to you and the designers probably don't comprehend that. I think that one of the challenges again is the education. If you go back and understand how a designer works on a specification that he wants to achieve, with the greatest respect, so many designers never visit a PCB shop. They don't understand how it all is made.
I know that's basic stuff, but having that understanding first of all and then building on that is so important. Then when you make a point, he can understand what you're saying. He's not saying you're specifying something because there's more profit margin in it. You understand technology first. You help, you talk, communicate, etc. I think that's one of the nice things that a lot of major PCB manufacturers have done is get people that are experts in assembly and are experts in design and provide that expertise to the customer. Then you get a better build, a better understanding back from them so consequently you can do it quicker and you can do it at a more reasonable price because you've done your development up front.
Goodwin: One of the things that you bring up that's really interesting is, and Jack mentioned it earlier, it is in the competitive nature of our business to almost blanket the demands that come out of OEMs. One of the things that springs to my mind immediately that links in with what you were saying is about pre-preg retesting. We get OEMs that say you cannot supply a retested product. Now we make pre-preg to a specification. We measure a set of characteristics on that pre-preg, so it either passes or it fails. So with blanket bends on retesting, all they do is add to the complexity in the supply chain, delays in the supply chain, and added costs in the supply chain.
Actually I think mostly they're put in place by people that really don't understand that we're a manufacturer of a product. We make it to a specification. We test it to a specification. When we retest it, we retest it to that original specification. Either it passes or it fails. It's delivered with a retest certificate and a CMC and we're standing behind the retest we've done.
Page 3 of 6
Share on:
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
11/29/2024 | Nolan Johnson, I-Connect007If you’re in the U.S. today, odds are you’re at home enjoying the aftermath of a Thanksgiving holiday meal. Let me just say that whether you had a Thanksgiving holiday surrounded by family, friends, or both, I hope it was joyous. If you know someone who doesn’t have friends or family with whom to share this time, please reach out and include them. Chronic loneliness can exact a measurable toll on our mental and physical health. Wherever you are on the globe this holiday season, I encourage you to reach out to someone who might be battling loneliness and connect. It will make a difference to them. Not only will it help get you in the mood for your winter holiday of choice, but it’ll be good for your mental health as well.
IPC Japan Puts More Focus on Collaboration, Standards Development, Advanced Packaging
11/26/2024 | Yusaku Kono, IPC Japan RepresentativeIn the past year, IPC has strengthened its relationships with key Japanese companies and government bodies. This was accomplished, in part, by a visit to Japan this past summer, where members of the IPC Asia team, punctuated by standards committee work last winter, forged stronger ties with government officials and companies involved in electronics manufacturing.
IPC Hall of Fame Spotlight Series: Highlighting Patty Goldman
11/22/2024 | Dan Feinberg, I-Connect007In my first article of this special series, I wrote a synopsis of the IPC Raymond E. Pritchard Hall of Fame (HOF) Award, along with a commentary on its first few members, particularly Pritchard. Over the years, IPC members who have contributed significantly to IPC and our industry have been awarded this high honor and recognition. Though many early HOF members have passed away and are unknown to today’s IPC membership, their contributions still resonate. Over the coming months, I look forward to researching and reporting on IPC Hall of Fame members and their contributions. This month, I highlight Patty Goldman.
Winners of IPC Hand Soldering World Championship at electronica 2024 Announced
11/21/2024 | IPCIPC hosted its Hand Soldering World Championship in Munich, Germany, at electronica on 14-15 November 2024, welcoming 14 competitors from 13 companies and 12 countries worldwide. Skilled contestants competed to build an electronics assembly in accordance with IPC-A-610 Class 3 criteria, and were judged on the functionality of the assembly, compliance with the assembly process and overall product quality. The contestants were allowed a maximum of 60 minutes to complete the assembly.
IPC Issues Clarion Call for EU to Reclaim Leadership in Electronics Manufacturing
11/21/2024 | IPCIPC released a synopsis of its recent white paper, Securing the European Union’s Electronics Ecosystem. This condensed document presents a comprehensive overview of the current challenges in Europe’s electronics manufacturing industry and shares actionable steps to help the EU achieve a stronger, more autonomous ecosystem.