Marcy’s Musings: The Legislative Outlook—Helping or Hurting?
It’s Only Common Sense: The Phone Is Still Mightier Than the Keyboard
The Marketing Minute: Marketing With Layers
MacDermid’s Research Team Talks New Cyanide-free Immersion Gold at SMTAI
December 14, 2015 | Patty Goldman, I-Connect007Estimated reading time: 8 minutes
While at SMTAI in Chicago recently, I met with two of MacDermid’s research team, Jun Nable, research project manager, who has been with MacDermid since 2007, and Cherry Santos, associate research fellow responsible for formulation work for metal plating solutions. We talked about the posters they were presenting and why they chose SMTAI.
Patty Goldman: I understand that you both presented posters here at SMTA, so why don’t you tell us a little about them.
Jun Nable: The poster that I presented is about a new cyanide-free immersion gold that's suitable for PCB surface finishes. What makes this different is it is cyanide-free. It's more environmentally-friendly, it's easier to handle, and has the advantage of simplified operating parameters. The majority of conventional immersion gold in use right now contains cyanide. When you hear the word cyanide, you know it's toxic. We need to take special precautions when handling it.
Santos: And there are requirements for waste treatment.
Nable: Right, like waste permits and things like that. So, that's the conventional immersion gold generally in use in the industry. We are providing an alternative to that without compromising the performance of the surface finish.
Goldman: That's very important. There must be a lot of interest in cyanide-free. How thick is the final gold finish?
Nable: For ENIG purposes, the target is around two micro-inches. In terms of plating performance like plating rate, the cyanide-free immersion gold is comparable to the conventional immersion gold. It's comparable, if not better in solderability, appearance and uniformity.
Goldman: And how about the controls and lifetime of the bath, things like that?
Nable: I mentioned earlier about simplifying the operating parameters. The advantage of this cyanide-free immersion gold is we can operate at 40°C. Conventional immersion gold operates at a much higher temperature of 80°C. Also the pH is near neutral for this cyanide-free bath. So, it's much more simplified. Not to mention the energy savings as well, by not having to get to that high temperature.
Goldman: That has got to be a nice selling point. A lot of people here are with EMS companies. Has there been a lot of interest in your new process?
Nable: There has been some interest. Every time you give an alternative that has new features, of course, it has to be further qualified.
Santos: There's always that skepticism with any new finish. It has to go through a rigorous qualification process.
Goldman: So, in order for a PCB fabricator to begin using this, it still has to be qualified by their customers?
Santos: Yes, it has to go to trial production and get OEM approval. The customer needs to assess the performance and ensure that it meets the specified standard for their target application. Does the alternative finish perform similarly or better than the current finish?
Page 1 of 4
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Rehm Wins Mexico Technology Award for CondensoXLine with Formic Acid
10/17/2025 | Rehm Thermal SystemsModern electronics manufacturing requires technologies with high reliability. By using formic acid in convection, condensation, and contact soldering, Rehm Thermal Systems’ equipment ensures reliable, void-free solder joints — even when using flux-free solder pastes.
Indium Experts to Deliver Technical Presentations at SMTA International
10/14/2025 | Indium CorporationAs one of the leading materials providers to the power electronics assembly industry, Indium Corporation experts will share their technical insight on a wide range of innovative solder solutions at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
10/14/2025 | Nash Bell -- Column: Knocking Down the Bone PileBall grid array (BGA) components evolved from pin grid array (PGA) devices, carrying over many of the same electrical benefits while introducing a more compact and efficient interconnect format. Instead of discrete leads, BGAs rely on solder balls on the underside of the package to connect to the PCB. In some advanced designs, solder balls are on both the PCB and the BGA package. In stacked configurations, such as package-on-package (PoP), these solder balls also interconnect multiple packages, enabling higher functionality in a smaller footprint.
Indium to Showcase High-Reliability Solder and Flux-Cored Wire Solutions at SMTA International
10/09/2025 | Indium CorporationAs one of the leading materials providers in the electronics industry, Indium Corporation® will feature its innovative, high-reliability solder and flux-cored wire products at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
‘Create your Connections’ – Rehm at productronica 2025 in Munich
10/08/2025 | Rehm Thermal SystemsThe electronics industry is undergoing dynamic transformation: smart production lines, sustainability, artificial intelligence, and sensor technologies dominate current discussions.