Elementary Mr. Watson: Ensuring a Smooth Handoff From PCB Design to Fabrication
The Shaughnessy Report: Breaking Down the Language Barrier
Connect the Dots: Designing for Reality—Routing, Final Fab, and QC
Simberian to Demonstrate Simbeor THz Software at DesignCon 2016
January 20, 2016 | SimberianEstimated reading time: 1 minute
Simberian Inc., an industry leader in electromagnetic simulation technology, will participate in the DesignCon 2016 January 19-21 at the Santa Clara Convention Center. Simberian will feature demonstrations of updated Simbeor THz electromagnetic signal integrity software.
Simberian will demonstrate the updated Simbeor THz software at Booth #422 at DesignCon. Demonstration will include pre- and post-layout analysis of typical PCB interconnects operating up to 33 Gbps with crosstalk, broadband dielectric and conductor roughness model identification with GMS-parameters and SPP technique up to 50 GHz, and unique electromagnetic field visualization for typical PCB structures.
Simbeor THz is two-time DesignVision award-winning software tool for the physical design of PCB and packaging interconnects operating up to THz frequency range. Simbeor THz provides unique systematic approach to the interconnect analysis that starts from the material model identification and guaranties the analysis to measurement correlation at the end. Updated Simbeor THz is available for customers and trials at www.simberian.com.
About DesignCon
DesignCon, produced by UBM Canon, is the world's premier conference for chip, board and systems design engineers in the high-speed communications and semiconductor communities. DesignCon, created by engineers for engineers, takes place annually in Silicon Valley and remains the largest gathering of chip, board and systems designers in the country. This four-day technical conference and expo combines technical paper sessions, tutorials, industry panels, product demos and exhibits from the industry's leading experts and solutions providers. More information is available at www.designcon.com.
Share on:
Suggested Items
Würth Elektronik Now an Infineon ‘Preferred Partner’
03/13/2025 | Wurth Elektronik eiSosWürth Elektronik, one of the leading manufacturers of electronic and electromechanical components, is broadening its collaboration with semiconductor manufacturers.
Elementary Mr. Watson: Ensuring a Smooth Handoff From PCB Design to Fabrication
03/13/2025 | John Watson -- Column: Elementary, Mr. WatsonAt the 2020 Tokyo Summer Olympics, the U.S. men's 4x100-meter relay team had high hopes of winning a medal. The team comprised some of the fastest sprinters in the world, but something went wrong. In a relay, four runners must smoothly pass their baton to the next runner inside a zone on the track. If a runner drops the baton or it’s passed outside the zone, the team risks disqualification. The U.S. team’s pass between the second and third runner was messy, slowing them down. By the time the last runner received the baton, the team had lost too much time. They finished sixth in their heat and didn’t qualify for the final.
Ventec International Group Announce Launch of VT-47LT IPC4101 /126 Prepreg for HDI
03/12/2025 | Ventec International GroupVentec International Group announce launch of VT-47LT IPC4101 / 126 Prepreg. Are Microvia Failures Plaguing Your HDI Any Layer Designs? High-density interconnect (HDI) designs are pushing the envelope - higher layer count HDI relies on complex microvia designs: skip vias, staggered microvias, and stacked microvias in sequential laminations.
TI Introduces the World's Smallest MCU, Enabling Innovation in the Tiniest of Applications
03/12/2025 | PRNewswireTexas Instruments (TI) introduced the world's smallest MCU, expanding its comprehensive Arm® Cortex®-M0+ MSPM0 MCU portfolio. Measuring only 1.38mm2, about the size of a black pepper flake, the wafer chip-scale package (WCSP) for the MSPM0C1104 MCU enables designers to optimize board space in applications such as medical wearables and personal electronics, without compromising performance.
Speaking the Same Language as Your Fabricator
03/12/2025 | Andy Shaughnessy, Design007 MagazineWe do indeed have a failure to communicate; designers and fabricators often seem to be talking past each other, which can lead to jobs being put on hold. We asked Jen Kolar, VP of engineering for Monsoon Solutions, and columnist Kelly Dack to share their thoughts on ways that we can break down the communication barrier between design and fabrication. As they point out, a design kickoff checklist and a solid review process can be invaluable tools in a designer’s toolbox.