Target Condition: Are Autorouters Friend or Foe?
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
IPC Designers Council Viewpoint: Mike Creeden
January 20, 2016 | Andy Shaughnessy, PCBDesign007Estimated reading time: 2 minutes
When covering the IPC Designers Council, one quickly learns that it’s the volunteers who make the train run on time. San Diego PCB CEO Mike Creeden, CID+, is one such volunteer, and as a member of the Designers Council’s Executive Board, he was a must-have for this issue. I tracked him down and asked him to give us a rundown of his involvement with the DC, and to explain why designers might want to get involved with their local DC chapters.
Andy Shaughnessy: How and when did you get involved in the Designers Council?
Mike Creeden: Around 1993, I was presented by a fellow designer an invitation to attend a new meeting called the IPC Designers Council, which was being held at Qualcomm. I had known of IPC for most of my career of 17 years, but I did not know anything about a Designers Council. So, being curious by nature, I attended this meeting and immediately saw several fellow designers I was well acquainted with, and then I met several new people whom I still see to this day. There was some good food and it was an event outside of work, so I really started to enjoy the meeting.
What came next was profound. I was exposed to IPC standards and the value they brought to my designs, my company and ultimately my career! I saw that the charter of these meeting was to bring this education out to the designer in the workplace as a form of education. So being the naïve person I am, I asked, “What are we doing to get this message out there to those that don’t know about this Designers Council chapter?” The response was simple. “What do you think we should do and how would you like to go about it?” I was nominated as the Education board member and had the privilege to serve for several years.
Shaughnessy: What do you think are the most important benefits that the Designers Council offers designers and the industry?
Creeden: The Designers Council is a multifaceted organization and as such has been several different things to me over the years. I assume this must be true for other people as well. The primary benefit that the DC brings is improvements to the products in our industry. It does so by way of improving the knowledge base of each designer who attends and participates. The products we design become more reliable by applying the proven standards as determined by the experts in the industry, from a cross-section of the marketplace.
When we as designers bring improvements to our company, we’re recognized by our peers and by our employers. We may not always be rewarded, but as your value goes up, maybe it’s time to find a company that would recognize and reward your value. Another aspect that I mentioned earlier is the opportunity to network with others in your profession. This can be in the form of meeting old friends or making new friends. Maybe it is a time when you can learn some helpful methods to deal with technical issues or a professional response to something that was occurring in your workplace. Often, business connections and business deals can occur based on the contacts that you make through the Designers Council. When someone sees you attending, participating, and contributing in a public forum, they may become interested in services you offer, your expertise, and your ability to use it well.
To read this entire article, which appeared in the December 2015 issue of The PCB Design Magazine, click here.
Share on:
Suggested Items
Seeing a Future in Mexico
07/09/2025 | Michelle Te, I-Connect007The Global Electronics Association (formerly known as IPC) has been instrumental in fostering a partnership with Guanajuato, a state north of Mexico City with 12 industrial clusters and close to 150 companies involved in electronics. This past spring, Alejandro Hernández, the undersecretary for investment promotion in Guanajuato, attended IPC APEX EXPO 2025 at the invitation of IPC Mexico Director Lorena Villanueva, where he met with several companies to discuss the opportunities available in Mexico. He is inviting electronics-related companies seeking long-term investment in a centrally located area with access to highways, railways, and ports.
The Global Electronics Association Releases IPC-8911: First-Ever Conductive Yarn Standard for E-Textile Application
07/02/2025 | Global Electronics AssociationThe Global Electronics Association announces the release of IPC-8911, Requirements for Conductive Yarns for E-Textiles Applications. This first-of-its-kind global standard establishes a clear framework for classifying, designating, and qualifying conductive yarns—helping to address longstanding challenges in supply chain communication, product testing, and material selection within the growing e-textiles industry.
IPC-CFX, 2.0: How to Use the QPL Effectively
07/02/2025 | Chris Jorgensen, Global Electronics AssociationIn part one of this series, we discussed the new features in CFX Version 2.0 and their implications for improved inter-machine communication. But what about bringing this new functionality to the shop floor? The IPC-CFX-2591 QPL is a powerful technical resource for manufacturers seeking CFX-enabled equipment. The Qualified Product List (QPL) helps streamline equipment selection by listing models verified for CFX compliance through a robust third-party virtual qualification process.
The Knowledge Base: A Conference for Cleaning and Coating of Mission-critical Electronics
07/08/2025 | Mike Konrad -- Column: The Knowledge BaseIn electronics manufacturing, there’s a dangerous misconception that cleaning and coating are standalone options, that they operate in different lanes, and that one can compensate for the other. Let’s clear that up now. Cleaning and conformal coating are not separate decisions. They are two chapters in the same story—the story of reliability.
Advancing Aerospace Excellence: Emerald’s Medford Team Earns Space Addendum Certification
06/30/2025 | Emerald TechnologiesWe’re thrilled to announce a major achievement from our Medford, Oregon facility. Andy Abrigo has officially earned her credentials as a Certified IPC Trainer (CIT) under the IPC J-STD-001 Space Addendum, the leading industry standard for space and military-grade electronics manufacturing.