-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSilicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
Cost Drivers
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value.
Mechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Who Really Owns the PCB Layout?
December 13, 2017 | Paul Taubman, Nine Dot ConnectsEstimated reading time: 5 minutes
![](https://iconnect007.com/application/files/1916/3125/0276/Paul_Taubman.jpg)
This article ran in last week's Inside Design Newsletter, but some readers were unable to access it due to a corrupted URL. We're publishing Paul Taubman's piece again this week. Enjoy! --Ed
One would think that the title of this article should be a no-brainer. The fact of the matter is that the ownership of this vital aspect of electronic design is not only cloudy, but it will become murkier in the next 10 years. This murkiness is also an opportunity for mechanical engineers who aren’t afraid to expand their horizons.
In order to understand the current climate, we have to look at the division of labor that took place in electronic design about 40 years ago. The labor was divided into two processes, with the first being the design itself. This process was (and still is) owned by the electrical engineers.
Though circuit design has changed, the methods for representing the circuit have not. Electrical engineers were designing circuits with discrete components such as transistors, amplifiers, resistors, capacitors, diodes, etc. They did not concern themselves with the physical details. They would call out values and key characteristics of the components. All of this design was and still is represented in an abstract form, meaning, the components are drawn using symbolic representations and the schematic drawings are dimensionless.
Electrical engineers were back then and are still taught circuit design theory. Granted, a good university program will demand some electronic lab classes; however, it is all done on proto boards to prove out some concept. What one will rarely find in a university classroom is a PCB design course. The only time an electrical engineering student will be exposed to a PCB is if he signs up for a senior project that requires the creation of a PCB.
The second step of the design process is the layout of the physical board. It was rare for the electrical engineer to layout the PCB. Once they were done with the circuit design, this was handled off to a layout artist. A layout artist may have gone through a technical school, but in many cases, they were tech-savvy individuals out of high school. They made the decisions as to how the schematic was to be represented in real life. It was an art form using Mylar and tape.
Throughout the 1970s, the integrated circuit (IC) chip became more prevalent. The functionality that was created by individual discrete components could now be etched in silicon and take up a space that was far smaller. This may have reduced the real estate used on the board for discrete components, but now there were more component pins to route in a small space.
By the mid-1980s, the Mylar and tape method of board layout was becoming a difficult process. The electrical engineers were not designing with discrete components, rather, they were designing with ICs. This required more than two layers of copper on the PCB. To remedy this, computer programs were developed to assist in the layout of the PCB. The layout artists traded their light tables for desktops with electronic design automation (EDA) tools.
Since the 1980s, the PCB layouts have become more complex. More so, it is very safe to say that the PCB is not going to go the way of the dinosaur. However, we have to recognize that the three economic downturns in the last 30 years have had a monumental impact on PCB layout artists. The first was in 1990, followed by the tech wreck in 2001 and the great recession of 2008. In each of the subsequent recoveries, the burden of PCB layout has been put on the shoulders of the electrical engineer. In fact, PCB layout is now a line item in a job position for a hardware engineer.
Surveys by Mentor confirm this. What they have found is that over 75% of those who call themselves layout artists are over the age of 45 (as of 2017). More importantly, other surveys indicate that 50% of them plan to retire within 10 years.
What does this mean?
- Those who are layout artists have had a tough row to hoe. They have survived 3 major downturns. They know that if they were passing their information to someone else, they are threatening their own existence. They have no incentive to teach a new generation.
- Academia still looks at the layout as a technician’s job. Therefore, they do not see the need to teach this skill to their engineering students. Academia is completely out of touch with the industry.
- No vocational program really exists to train individuals on PCB layout.
- As mentioned, PCB is not going away any time soon. It is vital medium for electronic design.
- Mechatronic design is going to lean heavily on the concepts that are currently use in PCB layout. Understanding the current methods used to design and fabricate a PCB will be necessary for mechatronic manufacturing methods.
As the title suggests, we in the PCB design space do not have someone to take ownership the layout. There is no effort in the industry to replace or recreate the position of layout artist. The electrical engineering community has not embraced it because most of the focus is on component development and embedded programming. They are still trained in theoretical concepts of circuit design. Few venture into the physical hardware.
In thinking outside the box, the PCB is just as mechanical as it is electrical. We at Nine Dot Connects have made it clear that mechatronic design is the simultaneous blending of both the mechanical and electrical. When we really look at the PCB, it just as much mechanical as it is electrical. In fact, it is bold to say that the PCB itself is truly a mechatronic design. When the layout artists are designing a PCB, they are considering both the electrical and mechanical aspects simultaneously.
Therefore, who’s to say that the PCB cannot be owned by the mechanical? In a blog post to come, we will explore the reasons why a mechanical engineer can own this space, a space that will only become more precious as time moves on.
Suggested Items
Atotech to Participate at KPCA Show 2024
09/03/2024 | AtotechMKS’ Atotech will participate in this year’s KPCA Show 2024 in Incheon, held at Songdo Convensia from September 4-6, 2024.
Victory Announces Breakthrough in PCB Technology with New Product Launch
08/29/2024 | openPRShenzhen Victory Electronics Technology Co., Ltd., a leader in the printed circuit board (PCB) manufacturing industry, is proud to announce the successful development of a groundbreaking new product.
Connect the Dots: Designing for Reality—Electroless Copper
08/28/2024 | Matt Stevenson -- Column: Connect the DotsRoll up your sleeves because it's time to get messy. In a recent episode of I-Connect007’s On the Line with… podcast, we discussed electroless copper deposition. This process deposits a copper layer into the through-holes and vias of what will eventually be a PCB. Electroless copper deposition feels like a black box to many people. It sort of looks like a black box, too. The boards go in one side, come out the other, and emerge differently. So, let's crack open that black box and look inside.
Maximizing ROI Through Better Wet Process Control
08/20/2024 | I-Connect007 Editorial Team“When things get out of control, the variation in your wet process begins,” says Mike Carano,. “Just because they look like good boards and may even pass electrical test, it does not necessarily mean you have good boards. Once the chemistry is headed toward the right or left side of the process control parameter cliff, the plating is compromised. If the copper is thinner than it should be, when the customer puts it into service, the board may fail after 500 cycles vs. the requisite 1,000 or 2,000 cycles. The root cause issue is that you plated 7/10ths of a mil of copper instead of one-mil of copper because you were not controlling your process. The fact that you passed your own electric test becomes inconsequential.”
The Chemical Connection: Controlling an Alkaline Etch Bath With Low Copper Loading
08/07/2024 | Don Ball -- Column: The Chemical ConnectionThis month, I wanted to continue my discussion on how much process control is actually needed for high-density circuit production. However, in the last month, I have been called on to help with a specific process control problem: how to control an alkaline etch bath when you’re not etching much copper. This problem has been cropping up more frequently as smaller shops (and a few larger ones) concentrate on low-volume, high-value plated through-hole panels such as prototypes, resistor cores, etc.