-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueMechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
Creating a Culture of Collaboration
PCB designers could learn quite a bit from NASA and the private companies that develop spacecraft: Every one of these vehicles is a testament to the value of collaboration among disparate stakeholders. Without a collaborative culture, the rocket might never get off the ground.
Breaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The Impact of HDI on PCB Power Distribution
December 27, 2017 | Craig Armenti, MentorEstimated reading time: 2 minutes
![](https://iconnect007.com/application/files/3916/3123/1289/Armenti_mug.jpg)
High-density interconnect (HDI) technology is often used to meet the requirements of today’s complex designs. Smaller component pitches, larger ASICs and FPGAs with more I/O, and higher frequencies with shrinking rise-times all require smaller PCB features, driving the need for HDI. Beyond some of the more obvious electrical effects of the microvias used on HDI designs, there is also an impact to the power integrity the PCB. This includes different effects of mounted inductances of decoupling capacitors, changes in plane performance due to reduction in perforation from chip pinouts, and the inherent plane-capacitance changes from using dielectrics of various thicknesses.
HDI Primer
HDI can be a confusing topic, especially for new engineers and designers, or those not well versed in the subject matter. Although this article is not intended to be an in-depth tutorial on HDI technology, a quick review of the key aspects is appropriate.
HDI is a technology that, through a combination of high density attributes, allows for a higher wiring density per unit area as compared to traditional PCB technology. In general, HDI PCBs contain one or more of the following: reduced trace width and spacing, microvias including blind and buried, and sequential lamination.
Current generation HDI designs are typically found in mobile phones, digital cameras, laptops and wearables to name just a few. Basically, whenever a product needs to be compact and/or lightweight, then HDI technology will most likely be applied. The benefits of HDI technology include:
- Reduced space requirement using smaller vias, reduced trace width and reduced trace spacing, all of which allow components to be placed in closer proximity
- Reduced layer count as a result of increased routing channels on internal layers
- Improved signal integrity due to shorter distance connections and lower power requirements
- Improved power integrity due to ground planes closer to the surface parts and improved distribution of capacitance
- Potential to lower fabrication and assembly costs by consolidating multiple PCB’s into a single PCB
When utilizing HDI technology, two basic HDI structures exist:
- Build-up or sequential build-up (SBU) structures
- Any-layer structures
A key aspect of HDI technology is the use of microvias. For reference, the IPC HDI Design Committee has identified microvias as any hole equal to or less than 150 microns. Multiple types of HDI stack-ups associated with blind and buried microvias can be used to meet the density and cost requirements for today’s products. Design teams should develop stack-ups in conjunction with the board fabricator to minimize cost and meet signal integrity requirements. There may also be additional requirements related to plating and specific materials. As a rule, the vendor will adjust all the stack-up variables as needed during their process to meet the end-product requirements.
To read this entire article, which appeared in the November 2017 issue of The PCB Design Magazine, click here.
Suggested Items
Intel Names Naga Chandrasekaran to Lead Foundry Manufacturing and Supply Chain
07/26/2024 | IntelIntel Corporation today announced the appointment of Dr. Naga Chandrasekaran as chief global operations officer, executive vice president and general manager of Intel Foundry Manufacturing and Supply Chain organization.
We Energies, Foxconn Complete Clean Energy Project in Wisconsin
07/25/2024 | FoxconnWe Energies, a Wisconsin-based utility company of WEC Energy Group, and Hon Hai Technology Group (Foxconn) are pleased to announce the completion of a solar panel installation project at Foxconn’s Science and Technology Park in Mount Pleasant, Wisconsin.
Pragmatic Semiconductor Appoints Murthy Renduchintala to Board of Directors
07/25/2024 | PRNewswirePragmatic Semiconductor Ltd. announced the appointment of Dr. Venkata "Murthy" Renduchintala, as a non-executive director to Pragmatic's Board of Directors, effective immediately.
Altair Signs MoU With University of Nottingham to Develop Aerospace Digital Twin Project
07/25/2024 | PRNewswireAltair, a global leader in computational intelligence, has signed a memorandum of understanding (MoU) with the U.K.-based University of Nottingham for a digital twin project within the aerospace sector.
MKS’ Atotech and ESI Participate in Electronics Circuit Asia in Thailand
07/25/2024 | AtotechMKS Instruments announces its participation at the Electronics Circuit Asia 2024 in Thailand, July 24-26, highlighting its leading brands Atotech® and ESI® and related advances in advanced packaging, package substrate, and printed circuit board manufacturing.