Connect the Dots: How to Avoid Five Common Causes of Board Failure
Elementary Mr. Watson: Routing Hunger Games—May the Traces Be Ever in Your Favor
Target Condition: Floor Planning Without a Floor
Ucamco Releases Specification for Fabrication Documentation in Gerber
April 30, 2018 | UcamcoEstimated reading time: 1 minute
Since decades Gerber is the standard for describing the images – copper layers, solder mask, drills – in PCB fabrication data. Attributes introduced with Gerber X2 ‘add intelligence to the image’ by identifying layers, vias, SMD pad, component pin numbers and reference designator.
But PCB fabrication data is not just about images - it includes fabrication documentation such as finish, overall thickness and materials. It is essential for the quoting, planning, engineering, CAM and fabrication of the bare and assembled board. It is often transferred informally, in drawings and texts, and handled manually, wasting time and risking errors. The Gerber Job File transfers this information in a machine-readable manner as part of Gerber fabrication data.
The extension is compatible with both Gerber X1 and X2. Existing image input/output code does not need to be changed when implementing the Gerber job file.
The Gerber hallmark of simplicity and human-readability is maintained.
The Gerber Job File is straightforward to implement. Partial implementations are allowed, even encouraged. Better a partial job file than no job file at all. Developers can pick and choose from the spec what suits them. Several software suppliers have already committed to support the new Gerber Job File.
The initial draft was published on the Ucamco website for public review by the Gerber community in March 2017. There was a lively discussion, the draft went through seven public revisions before being finalized early April 2018. It became much more practical in the process.
About Ucamco
Ucamco (formerly Barco ETS) is a market leader in PCB CAM software, photoplotting and direct imaging systems, with a global network of sales and support centers. Headquartered in Ghent, Belgium, Ucamco has over 25 years of ongoing experience in developing and supporting leading-edge photoplotters and front-end tooling solutions for the global PCB industry. Key to this success is the company's uncompromising pursuit of engineering excellence in all its products. Ucamco also owns the IP rights on the Gerber File Format through its acquisition of Gerber Systems Corp. (1998).
The specification and example files are available at the Gerber page, click here.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Altus Supports Datalink Electronics with Advanced Selective Soldering Solution to Boost Manufacturing Efficiency
09/02/2025 | Altus GroupDatalink Electronics has partnered with Altus Group to integrate a cutting-edge automated soldering solution, enhancing its production capabilities and reinforcing its strategic focus on quality, automation, and scalability.
Connect the Dots: How to Avoid Five Common Causes of Board Failure
09/03/2025 | Matt Stevenson -- Column: Connect the DotsBoards fail for various reasons, and because I’ve been part of the PCB industry for a long time, I’ve seen most of the reasons for failure. As part of my ongoing crusade to help designers design for the reality of manufacturing, here are five common causes for board failure and how to avoid them.
More Than a Competition: Instilling a Champion's Skill in IPC Masters China 2025
09/01/2025 | Evelyn Cui, Global Electronics Association—East AsiaNearly 500 elite professionals from the electronics industry, representing 18 provinces and municipalities across China, competed in the 2025 IPC Masters Competition China, March 26–28, in Pudong, Shanghai. A total of 114 contestants advanced to the practical competition after passing the IPC Standards Knowledge Competition. Sixty people competed in the Hand Soldering and Rework Competition (HSRC), 30 in the Cable and Wire Harness Assembly Competition (CWAC), and 24 in the Ball Grid Array/Bottom Termination Components (BGA/BTC) Rework Competition.
Indium Promotes Huang to Senior Manager, Marketing Communications
08/28/2025 | Indium CorporationWith its commitment to innovation and growth through employee development, Indium Corporation announces the promotion of Jingya Huang to Senior Manager, Marketing Communications, to continue to lead the company’s branding and promotional efforts.
Rehm Academy Expands Its Training Program
08/28/2025 | Rehm Thermal SystemsThe demands on modern industrial companies and employees continue to rise, and therefore, the topic of further education is becoming increasingly important today.