-
-
News
News Highlights
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLearning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
Training New Designers
Where will we find the next generation of PCB designers and design engineers? Once we locate them, how will we train and educate them? What will PCB designers of the future need to master to deal with tomorrow’s technology?
The Designer of the Future
Our expert contributors peer into their crystal balls and offer their thoughts on the designers and design engineers of tomorrow, and what their jobs will look like.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
Flexible Hybrid Electronics Design: Reducing Time to Market
March 23, 2022 | Sean Nachnani, NextFlexEstimated reading time: 2 minutes

Emerging innovations in the flexible hybrid electronics (FHE) domain are enabling new applications across multiple industries due to their highly flexible structures and additive manufacturing processes. The smaller form factor, lighter weight, and conformal capabilities are ideal for IoT edge devices in health and fitness monitoring, military asset identification and tracking, automotive displays and sensors, aerospace radar, and soft robotics. Significant industry research led by NextFlex is optimizing the processes from design through manufacture for FHE products.
FHE devices provide ideal solutions for many of today’s conformal electronics needs. They allow for the implementation of SWaP-C (size, weight, power, and cost) improvements over their more traditional counterparts. Because these FHE devices bend and flex, however, the design process takes on more of an electromechanical approach. The final product application dictates certain features, such as static or dynamic bending, component placement, and material choices. Moreover, non-conventional flexible substrates and printed conductors require more extensive RF simulation and characterization, unique to each manufacturing process. Without proper tools or experience, these features can instead become detriments that lead to longer design cycles and increased costs. In this article, we will dive into the basics for FHE design and its requirements.
We will discuss the tools NextFlex has developed to simplify the design process, shortening development cycles and ultimately time to market, and we will share how NextFlex and its consortium members from across the ecosystem are coming together to create materials databases and process development kits (PDK). We will describe how the materials and process database, FHE PDKs, reference designs, and managed reuse blocks are part of a new design process vision that promises to streamline FHE design and manufacturing.
Finally, we’ll talk about how, through these efforts, new FHE reference designs are emerging, and how we’ll be using these along with other reference modules to come up with a truly plug-and-play approach to FHE that reduces the amount of time and effort it takes to manufacture and design FHEs.
The Many Considerations When Designing for FHE
When it comes to designing FHE, its application drives the design considerations for the device as both a mechanical and electronic system. These considerations involve an interrelated set of choices based on application, environment, materials, process, and encapsulation.
FHEs have a wide variety of applications; for example, medical bandages that monitor vital statistics, monitoring systems for helicopter rotor blades, security tokens embedded into uniforms, and armbands that warn when a toxic gas concentration is too high. A primary question is whether the application will require a static bend form factor, where we apply the device and it stays as is, or will it be in dynamic, bending, and flex situations.
Then we need to look at the environment where these devices will be deployed. Are they being deployed in the middle of the desert, out on rough seas, in a cockpit above 30,000 feet, or is it on its way to the International Space Station?
To read the entire article, which appeared in the March 2022 issue of Design007 Magazine, click here.
Suggested Items
Collins Aerospace Approved to Begin Full Rate Production of MAPS Gen II system
03/13/2025 | Collins AerospaceCollins Aerospace, an RTX business, has received approval for Full Rate Production of the Mounted Assured Positioning, Navigation and Timing (PNT) Generation II system (MAPS GEN II).
Applied Aerospace Acquires NeXolve
03/12/2025 | PRNewswireApplied Aerospace, a proven manufacturer of solutions for commercial and military spacecraft, aircraft, and ground-based systems, announced it has completed the acquisition of NeXolve.
RTX's Collins Aerospace Unveils New Engineering Development and Test Center in Bengaluru
03/10/2025 | RTXCollins Aerospace, an RTX business, opened its new Engineering Development and Test Center (EDTC) at the company’s North Gate campus in Bengaluru, India. The new facility streamlines product development, testing, and certification of components locally, bringing aerospace technologies to market faster.
Jaltek Joins Midlands Aerospace Alliance
03/06/2025 | JaltekJaltek are delighted to officially announce that they have joined the Midlands Aerospace Alliance (MAA). The MAA which was formed in 2003 to support and represent the aerospace industry across the Midlands region, now represents one of the largest aerospace clusters in the world and is one of the strongest advocates for both the aerospace industry and the Midlands region.
Real Time with... IPC APEX EXPO 2025: Navigating Aerospace Training Trends With Blackfox
02/26/2025 | Real Time with...IPC APEX EXPOSharon Montana-Beard, Blackfox Training’s vice president of international and strategic sales, updates Nolan Johnson on the latest training demands and offerings from Blackfox.