The Shaughnessy Report: Solving the Data Package Puzzle
Fresh PCB Concepts: Key Considerations for Reliability, Performance, and Compliance in PCBs
Elementary Mr. Watson: Navigating RF—A Glide Path Approach to Design Success
Polar Talks Impedance and Insertion Loss Testing
May 29, 2015 | Real Time with...IPCEstimated reading time: Less than a minute
Product Specialists Michael Bode and Geoffrey Hazlett join Guest Editor Dan Feinberg to talk about the company and its products and solutions. They also talked about some of the technologies being enabled by the company, including controlled impedance and insertion loss testing.
Share on:
Suggested Items
Designers Notebook: Layer Stackup Planning for RF Circuit Boards
04/17/2025 | Vern Solberg -- Column: Designer's NotebookWhen designing multiple layer circuits requiring impedance control, the circuit board designer will work closely with an engineering specialist cognizant of RF printed circuit board design and layout, including mixed-signal applications.
Beyond Design: Key SI Considerations for High-speed PCB Design
03/20/2025 | Barry Olney -- Column: Beyond DesignOver the past two decades, I've simulated numerous complex, high-speed designs for customers creating computer-based products. In addition, I've conducted signal integrity software training courses and led classes on high-speed design. In this month’s column, I will reflect on the key considerations for achieving a successful high-speed PCB design that performs reliably, and I’ll highlight some of the common signal integrity issues that I frequently encounter.
Fresh PCB Concepts: PCB Stackup Strategies—Minimizing Crosstalk and EMI for Signal Integrity
01/09/2025 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are critical components in almost every modern electronic device, but their design goes far beyond routing signals from one point to another. The stackup of a PCB (the arrangement of its layers) has a significant impact on signal integrity, electromagnetic interference (EMI), and crosstalk. The complexity of these issues grows exponentially as designs increase in speed, frequency, and complexity.
Designing for Cost to Manufacture
11/21/2024 | Marcy LaRont, I-Connect007ICAPE's Richard Koensgen, a seasoned field application engineer with a rich background in PCB technology, shares his journey of working with customers and manufacturers through the intricacies of circuit board development and emphasizes the importance of early-stage collaboration with PCB designers. With a focus on tackling the most challenging aspects of PCB design and manufacturing, he discusses everything from layout considerations to the thermal challenges of today's technology when it comes to designing for cost.
Beyond Design: High-speed Rules of Thumb
11/21/2024 | Barry Olney -- Column: Beyond DesignThe idiom “rule of thumb” is often used in electronics design and has its origins in the practice of measuring roughly with one’s thumb. Rules of thumb are easy-to-remember, broadly accurate guides or principles based on practice rather than theory. They are used to help feed our intuition to find a quick solution based on experience. We are often forced to use rules of thumb in PCB design in the absence of expensive analysis tools. We also use them to get quick ballpark figures initially and then fine-tune the numbers with further analysis. We can use rules of thumb as a sanity check to assess whether we are using our tools correctly. In this month’s column, I will present some commonly used and helpful rules for high-speed PCB design.
Copyright © 2025 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in