Nordson ASYMTEK Releases New Programmable Tilt + Rotate 5-Axis Fluid DispenserJuly 8, 2015 | Nordson ASYMTEK
Estimated reading time: 3 minutes
Nordson ASYMTEK, a Nordson company, a global leader in dispensing, jetting, and coating equipment and technologies, announces its new Programmable Tilt + Rotate 5-Axis Fluid Dispenser that enables the jet to dispense using 5 axes of automated control instead of only 3 axes. The additional X and Y tilt modes enable dispensing from a vertical position and at varying tilt angles along all four sides of a device and up the side of a substrate or component, especially for 3D packages, while meeting stringent requirements for precision, accuracy, and speed. It enables dispensing of underfill, encapsulant, and coating fluids around tall substrate components on PCBs, flexible circuits, and in densely populated boards; provides precision fluid delivery to multiple sides of the latest-generation mobile device cases and sub-component camera modules by moving the nozzle tip closer to a target location such as a vertical wall; and dispenses into tight corners and narrow gaps in advanced packages.
For 3D IC applications, applying fluid for capillary underfill of stacked die using conventional vertical dispensing necessitates building up fluid to reach the top of the stack. If there are variations in the height of the stack, the defined fluid volume might end up short of the top layer or overflow the top. The Programmable Tilt + Rotate feature enables the user to determine the height of the die stack's top layer and then dispense fluid along all four sides of the stack just below the top surface, ensuring that sufficient fluid reaches the top of the stack without overflowing over the top. Dispensing from the top down can further reduce the amount of excess fluid required with conventional vertical dispensing, thereby reducing the total wet-out distance around the die stack.
Nordson ASYMTEK's Spectrum™ II fluid dispensing system with the integrated Tilt + Rotate option is seamlessly controlled with the feature-rich Fluidmove® software to provide automatic actuation of the tilt and rotation functions during production. Using the tilt mode, the jet dispenses up to an industry-leading ±30° with 1° resolution in either X or Y axis.
"Dispensing fluid has traditionally been done with a vertical motion, either with a needle or a jet; however, dispensing vertically no longer is able to meet the manufacturing requirements of semiconductor packages in mobile phone designs, smart watches, and similar products. For 3D IC packages, vertical dispensing is challenged by the need for consistency in applying underfill at the upper layers of the die stack," explained Garrett Wong, product manager, Nordson ASYMTEK. "Nordson ASYMTEK's new Programmable Tilt + Rotate 5-Axis Fluid Dispenser, in conjunction with Nordson ASYMTEK's dispense jets and Spectrum II fluid dispensing system, solve these problems, achieving unparalleled accuracy and precision in X, Y, and Z axes for thin lines and small dots. When jetting is combined with a rotated or tilted head, fluids can be precisely dispensed into previously impossible to reach locations at the speeds needed for high-volume manufacturing of cutting-edge products."
The Programmable Tilt + Rotate 5-Axis Dispenser will be on display at SEMICON West 2015, held in the Moscone Convention Center, San Francisco, California, from July 14-16, in booth #5743. Nordson ASYMTEK technical experts will be available to discuss your applications. For more information or to schedule an appointment, contact Nordson ASYMTEK at firstname.lastname@example.org, call +1 760-431-1919, check out the data sheet at http://www.nordson.com/en-us/divisions/asymtek/Literature/Accessories%20and%20Misc/DS-Tilt-Dispensing-Options-NordsonASYMTEK.pdf or visit our website at www.nordsonasymtek.com/tilt.
About Nordson ASYMTEK
Nordson ASYMTEK, a world leader in precision automated fluid dispensing, conformal coating, and jetting technologies, designs and manufactures dispensing and coating systems, supported by an award-winning global applications and service network for over 30 years. To find out more, visit www.NordsonASYMTEK.com.
About Nordson Corporation
Nordson Corporation delivers precision technology solutions that help customers succeed worldwide. Precision dispensing of adhesives, coatings, sealants, biomaterials, and other fluids, plastic extrusion and injection molding, electronics testing and inspecting, and surface preparation are supported by applications expertise and direct global support. Nordson serves consumer non-durable, durable and high-technology markets, specializing in packaging, nonwovens, electronics, medical, energy, transportation, construction, and product assembly. Founded in 1954, headquartered in Westlake, Ohio, USA, Nordson has operations and support offices in 30+ countries. Connect with Nordson at www.nordson.com and on social media
ViTrox Showcases Revolutionary Industry 4.0 Full Turnkey SMT PCBA Inspection Solutions at Productronica Germany 202309/13/2023 | ViTrox
ViTrox, which aims to be the world’s most trusted technology company, is thrilled to announce that we will be participating in Productronica Germany, at Booth #A2.504, from 14th to 17th November 2023, in International Congress Center München (ICM), Munich, Germany.
Dymax, a leading manufacturer of light-curing materials and equipment, is pleased to announce that their ground-breaking AR conformal coating, 9771, has completed the rigorous qualification testing for Military Specification MIL-I-46058C. This UL94V0 and UL746E recognized dual-cure coating has also been approved to the IPC-CC-830B standard and fully complies with RoHS2 Directives 2015/863/EU.
ViTrox, which aims to be the world’s most trusted technology company, is thrilled to announce that we will be partnering with our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering SA de CV, to bring to you our Mexico Technology Day 2023.
Justin Worden, the dynamic Global Sales and Marketing Director at Austin American Technology (AAT), is no stranger to creating a buzz in the electronics industry.
Anda Technologies to Showcase State-of-the-Art Plasma, Dispensing and Coating Systems at SMTA International09/06/2023 | Anda Technologies USA, Inc.
Anda Technologies, a leading provider of fluid application and custom automated manufacturing equipment, will exhibit in Booth #916 at the upcoming SMTA International exhibition. The event will be held at the Minneapolis Convention Center in Minnesota from Oct. 10-11, 2023.