Elementary, Mr. Watson: Rein in Your Design Constraints
Target Condition: Are Autorouters Friend or Foe?
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Herbstman, Holden and Kowalewski to Lead Denmark HDI Workshop
September 23, 2015 | Andy Shaughnessy, PCBDesign007Estimated reading time: 1 minute
This HDI workshop takes place Oct. 27-28 in Copenhagen, and it’s not only highly informative and educational, but it’s hands-on. First, attendees will be given an introduction to the principles of HDI and introduced to Mentor Xpedition, which is the platform used in this workshop.
This is NOT a Mentor Graphics tool training class—the principles can be used on all PCB design platforms. Therefore, you do not have to know Xpedition to attend this workshop.
Once you know the principles and the system, the fun begins! The rest of the time, attendees will be able to experience HDI capabilities first-hand by working at a workstation to practice connecting three advanced BGAs using HDI/microvias and then routing these HDI breakouts.
Target Audience
This workshop is for all PCB layout designers who see the need to achieve 2X to 4X higher board density, better electrical performance, or even those who just need to reduce the size or thickness of a finished board.
This class is essential for those who use HDI, but it is not limited to HDI designers. So, if you want to learn how to use HDI or just be better at it, come join us and learn from the best.
This is also a great networking opportunity; designers will be able to participate in a free networking dinner on the October 27 at the Hilton Copenhagen Airport Hotel. Here, you will be able to talk to the other participants, as well as instructor Steve Herbstman and assistants Happy Holden and Andy Kowalewski.
Focus is on the 6 Advanced Concepts In HDI Design:
1. Where to place the microvias
2. Creating boulevards with BGA breakouts
3. Elimination of through-hole with the stackup
4. Horz-vert microvia routing pairs
5. Automation of hand routing
6. Finer traces/spaces & via/pads
What you will learn:
1. Stackup and its critical role
2. Grounding scheme
3. Determining package types, pin counts, BGA pin spacing, etc.
4. Determining routing rules, line widths, grid patterns, etc.
5. Pin escaping and establishing routing channels and boulevards
6. Routing with constraint editor and via placement
The fee for this class is €1,600 excluding VAT. This includes the course book, labs, and the networking dinner on Oct. 27.
To register, click here.
Share on:
Suggested Items
Meet the Author Podcast: Martyn Gaudion Unpacks the Secrets of High-Speed PCB Design
07/10/2025 | I-Connect007In this special Meet the Author episode of the On the Line with… podcast, Nolan Johnson sits down with Martyn Gaudion, signal integrity expert, managing director of Polar Instruments, and three-time author in I-Connect007’s popular The Printed Circuit Designer’s Guide to... series.
Showing Some Constraint: Design007 Magazine July 2025
07/10/2025 | I-Connect007 Editorial TeamA robust design constraint strategy balances dozens of electrical and manufacturing trade-offs. This month, we focus on design constraints—the requirements, challenges, and best practices for setting up the right constraint strategy.
Elementary, Mr. Watson: Rein in Your Design Constraints
07/10/2025 | John Watson -- Column: Elementary, Mr. WatsonI remember the long hours spent at the light table, carefully laying down black tape to shape each trace, cutting and aligning pads with surgical precision on sheets of Mylar. I often went home with nicks on my fingers from the X-Acto knives and bits of tape all over me. It was as much an art form as it was an engineering task—tactile and methodical, requiring the patience of a sculptor. A lot has changed in PCB design over the years.
TTCI Joins Printed Circuit Engineering Association to Strengthen Design-to-Test Collaboration and Workforce Development
07/09/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a leading provider of electronic test and manufacturing solutions, is proud to announce its membership in the Printed Circuit Engineering Association (PCEA), further expanding the company’s efforts to support cross-functional collaboration, industry standards, and technical education in the printed circuit design and manufacturing community.
Bell to Build X-Plane for Phase 2 of DARPA Speed and Runway Independent Technologies (SPRINT) X-Plane Program
07/09/2025 | Bell Textron Inc.Bell Textron Inc., a Textron Inc. company, has been down-selected for Phase 2 of Defense Advanced Research Projects Agency (DARPA) Speed and Runway Independent Technologies (SPRINT) X-Plane program with the objective to complete design, construction, ground testing and certification of an X-plane demonstrator.