-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueWet Process Control
In this issue, we examine wet processes and how to obtain a better degree of control that allows usable data to guide our decisions and produce consistently higher-quality products.
Don’t Just Survive, Thrive
If we are to be relevant and prosper during these next critical decades in electronics, we must do more than survive. As an industry, we can and must thrive. In this issue, our contributors explore these concepts meant to help you take your business to the next level.
Material Matters
Materials management is nuanced, multifaceted, and requires a holistic systems approach for business success. When building high mix, low volume, and high technology, managing materials and overall cost containment are even greater challenges.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Estimated reading time: 1 minute
![](https://iconnect007.com/application/files/4716/3116/7346/columnist_dave_becker_100x100.jpg)
All About Flex: Imaging Methods for Etch Resist, Part 3: LDI
This column is the third and final part on methods for imaging etch resist. Part 1 discussed screen printing and Part 2 discussed traditional photo exposing. The basic process sequence for LDI is similar to photo exposing:
- The flexible substrate is coated with photosensitive resist
- The resist coated substrate is positioned in the LDI exposing unit
- LDI digitally exposes the desired pattern
- The photoresist is developed and the unwanted resist is washed away
- The copper pattern exposed by removed resist is chemically removed (i.e., etched)
- The resist is stripped off; only the copper pattern remains
Unlike photo exposing, LDI does not use a phototool, but directly exposes a digitally saved artwork pattern onto the resist. Photoresist is selectively exposed as the laser beam increments across the substrate in a rastering fashion. The image formation can be likened to the image formation on a CRT screen, which is formed from thousands of horizontal lines across the screen. Like photo exposing, LDI requires a photoresist, but the resist is normally specially formulated for laser printing; LDI resist is much faster-acting than traditional photoresist. Like photo exposing, resist for LDI comes in liquid or dry film options and the resist application methods are identical to those employed when using an artwork phototool. The post-exposing processing of an LDIprocessed flexible circuit is exactly the same as photo exposing.
Editor's Note: This article originally appeared in the June 2016 issue of The PCB Magazine.
More Columns from All About Flex
All About Flex: Terms and ConditionsAll About Flex: ISO 9001 Basics
All About Flex: FAQs on UL Listings for Flexible Circuits
All About Flex: Avoiding Trace Fracturing in a Flexible Circuit
Polyimide vs. Silicone for Flexible Heaters
All About Flex: Copper Thickness Requirements for Flex Circuits
All About Flex: Copper Grain Direction
All About Flex: Options for Purchasing Flexible Heaters