Accelerating Design Times for High-Performance Systems-on-Chip
August 1, 2016 | UC San DiegoEstimated reading time: 3 minutes
![](https://iconnect007.com/application/files/4516/3122/4520/CERTUS.jpg)
A team of computer scientists and electrical engineers from four U.S. universities have been awarded a joint project with nearly $5 million in funding from the Defense Advanced Research Projects Agency (DARPA).
Led by University of California San Diego computer-engineering professor Rajesh Gupta, the group of nine faculty members -- five from UC San Diego, one each from UCLA and the University of Michigan, and two professors from Cornell University – will develop a “synthesis methodology for accelerator-centric systems-on-chips and tool flows” that goes by the name CERTUS (Latin for definite, trustworthy or reliable).
Productivity involving the time it takes to design systems-on-chips has remained flat, largely because of the design complexity that is also responsible for rapidly rising costs. Indeed, as much as 50 percent of design and verification time must be devoted to designing high-performance analog parts, customized data-paths, and design exploration to meet schedules.
“All parts of chip design from clocking, sensing circuits to integrated data paths and synthesized random logic must come together in complicated tool flows that are, of necessity, hand-crafted to a specific process and process node,” said CERTUS principal investigator Gupta. “This causes multiple iterations through various design stages, so we need to come up with new methodologies to achieve a dramatic improvement in design times.”
CERTUS is part of the DARPA Circuit Realization at Faster Timescales (CRAFT) effort, which aims to reduce chip design times to a target 16-week design time for an system on a chip, including five weeks of physical design and closure. That represents a 10x improvement over the current time it takes (~ 160 weeks) to design a custom DoD ASIC chip. However, the researchers aim in their first fab run to demonstrate a 5x reduction, i.e., cutting design time by 80 percent. By the end of the project, they plan to demonstrate a 10x cut in design time, i.e., a 90 percent drop. “Reducing the effort required to design and verify leading-edge CMOS ASICs is critical to development of next-generation defense systems that require high computational performance in a power-constrained environment,” said DARPA Microsystems Technology Office (MTO) Program Manager Dr. Linton Salmon.
To achieve that goal, the CERTUS team proposes to develop learning algorithms that spot and enhance ‘regularity’ in high-level descriptions, build sophisticated pipelines, and enable system architects to compose blocks, including analog blocks that are difficult to automate.
“We propose a synthesis methodology that targets not only the design tools but also the flow of design data across different tools that are akin to business processes,” said UCLA professor Mani Srivastava, noting that the project must take into account the role of commercial tools and third-party intellectual property (IP) in the design process. “Once micro-architectural design is complete, the flow through commercial tools proceeds rapidly but faces tortuous repetitions to close the ‘last MHz’ gap in performance.”
The project will focus on high-performance systems-on-chips that contain one or more processing elements, usually in the form of an IP block produced from commercial vendors and supported by publicly-available software development tools. In the first phase of the project, researchers will design and build an accelerator-centric systems on a chip for use in autonomous vehicles under the Autonomy project with Northrop-Grumman Aerospace Systems and UC San Diego’s new Contextual Robotics initiative. In phase two, the focus will be on process porting issues, and the University of Michigan will take the lead on an ARM-hosted, accelerator-based implementation of the DARPA-selected sytems on a chip design (leveraging a decade-old research agreement between ARM and Michigan). The sytem on a chipwill contain an array of processing cores based on the RISC V processor from Berkeley.
The CERTUS team is focused on devising compositional methods that allow systematic reuse of designed blocks, including high-performance analog circuit blocks.
At UC San Diego, Gupta pulled together a group from the Departments of Computer Science and Engineering and Electrical and Computer Engineering at the Jacobs School of Engineering. Computer science-based faculty include Gupta and Michael Taylor (who was the lead architect of the DARPA-funded MIT Raw 16-core multicore processor chip). They will collaborate with electrical engineering professors Patrick Mercier and Ian Galton (the inventor of a new type of high-performance, phase-locked loop, or PLL, implemented as the clock generator in the latest Qualcomm Snapdragon mobile processor). Other investigators on the DARPA project include UCLA’s Mani Srivastava, Cornell professors Zhiru Zhang and Christopher Batten, and Ron Dreslinski at the University of Michigan.
Gupta and Srivastava were, respectively, director and deputy director of the now-ending Variability Project funded by the National Science Foundation in 2010 under its Expeditions in Computing program.
Suggested Items
Foxhole Group Boosts Life Science Capabilities with Accutron Partnership
09/03/2024 | Foxhole GroupFoxhole Group, a private investment firm focused on the industrial sector, announced today that it has added significant depth of expertise in life science and aerospace and defense capabilities to its Foxtronics EMS platform by partnering with the Faldu family to add Accutron to the company’s portfolio of EMS brands.
Marshall, Tech Mahindra to Explore Aerospace and Defense Collaboration
09/02/2024 | MarshallMarshall and Tech Mahindra, a leading global provider of technology consulting and digital solutions to enterprises across industries, have signed a Memorandum of Understanding (MoU) to identify and develop opportunities to work together across the aerospace and defense domains.
A Less Expensive Defense and Aerospace PCB Fab Startup
08/20/2024 | Alex Stepinski, Stepinski GroupEditor’s note: Investing in a new printed circuit board fabrication startup is not for the faint of heart or the light of wallet. Standing up a new “high-tech” PCB fab facility capable of becoming qualified for aerospace and defense work typically takes a minimum investment of $50 million. However, Alex Stepinski says entering the defense and aerospace markets with a new PCB fabrication start-up facility far under this prohibitive cost benchmark is possible when good partnerships, innovation, and sound engineering design enter from the beginning. In this article, Alex Stepinski outlines just how this can be achieved.
USPACE and EgSA to Form Aerospace Joint Venture in Egypt
08/16/2024 | PRNewswireUSPACE Technology Group Limited is pleased to announce that the Group has signed the strategic partnership agreement with the Egyptian Space Agency (EgSA), in relation to satellite manufacturing and testing, satellite launch, education and training, greatly expanding its business presence in the fast-growing African space market.
UHDI Fundamentals: UHDI Applications for Aerospace
08/13/2024 | Anaya Vardya, American Standard CircuitsUltra high density interconnect (UHDI) technology refers to advanced manufacturing processes used to create extremely compact and highly efficient electronic circuits at the sub-1-mil line and space level. In aerospace applications, UHDI is crucial due to the stringent requirements for weight, reliability, and performance in a challenging environment.