Latest Articles

EIPC Summer Conference 2016, Day 2: Strategies to Maintain Profitability in the European PCB Industry

Delegates awoke to a gloomy Scottish morning on the second day of the EIPC Summer Conference 2016. One or two who maybe overindulged in the whisky on the previous evening had some difficulty in finding time for breakfast before the conference proceedings, but the atmosphere in the meeting room was brighter than the weather outside, as Professor Martin Goosey introduced the day’s programme.

Finessing Miniaturized Magnetics into the Microelectronics Mix

A newly-announced DARPA program is betting that unprecedented on-chip integration of workhorse electronic components, such as transistors and capacitors, with less-familiar magnetic components with names like circulators and isolators, will open an expansive pathway to more capable electromagnetic systems.

RTW IPC APEX EXPO: Bob Neves Talks Trends Driving Test Services in China

Bob Neves, chairman and CTO of Microtek Laboratories China, talks with I-Connect007 guest editor Dick Crowe about a variety of issues, including the growing automotive electronics and military/aerospace industries, and how companies in the US that are buying boards and assemblers buying their materials in China can benefit from his company's test services locally.

Ken Moffat of American Standard Circuits Talks Aerospace Accreditation, DfM, and More

At the recent SMTA West Penn Expo & Tech Forum, I had the opportunity to speak with Ken Moffat, of American Standard Circuits, based in Chicago. Among the topics we discussed was the importance of attending local chapter shows like this one, and ASC’s value-added services such as DfM, especially in the metal-backed and RF arenas.

EIPC Summer Conference 2016, Day 1: Strategies to Maintain Profitability in the European PCB Industry

Resplendent in the kilt, EIPC chairman Alun Morgan welcomed a large and enthusiastic gathering of printed circuit professionals from all over Europe and as far afield as the USA, Canada and Russia, to the EIPC Summer Conference 2016 in Edinburgh, Scotland's cosmopolitan capital city.

RTW IPC APEX EXPO: ACE's Alan Cable Discusses Benefits of Selective Soldering, and Need for Lead Tinning

Alan Cable, president of ACE Production Technologies, talks to I-Connect007 guest editor Mark Thompson about selective soldering and how it helps electronics assemblers overcome the high cost of labor.

What You Probably Don't Know About NASA

While at Maker Faire 2016 in San Mateo recently, I met with George Gorospe of NASA’s Ames Research Center to discuss his group’s recent findings and projects, NASA’s CubeSats and microsatellites, and what the commercialization of space travel means for the near future.

Institute of Circuit Technology Annual Symposium

On June 1, Technical Director Bill Wilkie introduced the 42nd Annual Symposium of the Institute of Circuit Technology, at the Motorcycle Museum in Birmingham, UK, commenting upon the success of the recent Foundation Course and acknowledging the sterling efforts of his course tutors, although recognising that some of his longest-standing experts were now retiring.

CODE Takes Next Steps toward More Sophisticated, Resilient, and Collaborative Unmanned Air Systems

DARPA’s Collaborative Operations in Denied Environment (CODE) program seeks to help the U.S. military’s unmanned aircraft systems (UASs) conduct dynamic, long-distance engagements of highly mobile ground and maritime targets in denied or contested electromagnetic airspace, all while reducing required communication bandwidth and cognitive burden on human supervisors.

Global Technology Development: HDP User Group European Meeting 2016

Delighted and honoured to be invited again to attend the open session of the High Density Packaging User Group (HDPUG) European Meeting, I made my way to the picturesque Grand Duchy of Luxembourg, a tiny principality bordered by Belgium, France and Germany, and ranked among the world's top-three nations in both wealth and wine consumption, to learn about the latest in collaborative research and development by member companies engaged in the manufacture of products utilising high-density electronic packages.

Weiner’s World

Gen Consulting Company (GCC) has issued the Radiant Insights report “Global HDI Printed Circuit Board Market Forecast and Analysis 2016-2021.” The report provides a detailed analysis of worldwide markets for HDI printed circuit boards from 2011–2016, and provides market forecasts for 2016–2021 by region/country and subsectors.

International Partners Provide Science Satellites for America’s Space Launch System Maiden Flight

NASA’s new Space Launch System (SLS) will launch America into a new era of exploration to destinations beyond Earth’s orbit. On its first flight, NASA will demonstrate the rocket’s heavy-lift capability and send an uncrewed Orion spacecraft into deep space.

SMTA West Penn Chapter Plans Manufacturing Boot Camp in August

DRS Technologies' Bill Capen, who is also the president of the SMTA West Penn Chapter, talks with I-Connect007's Patty Goldman about their expanded Chapter Expo & Tech Forum, and their plans of doing a boot camp in August.

Beyond FR-4: High Performance Materials for Advanced Designs, Part 2

In Part One we covered basic FR-4 and variants that have been used in the commercial and military market for the past few decades, but in this column we will delve into the newer materials that target a specific application and/or market segment.

Industry Weighs in on Green Aviation Tech

Aviation’s future is bright … green. That was the environmentally promising message delivered during the Green Aviation Technical Interchange Meeting (TIM), held recently at NASA Langley Research Center in Hampton, Va.

Accelerating Complex Computer Simulations: Thinking beyond Ones and Zeros

Whether designed to predict the spread of an epidemic, understand the potential impacts of climate change, or model the acoustical signature of a newly designed ship hull, computer simulations are an essential tool of scientific discovery.

IMPACT Washington, D.C. 2016: Industry Leaders Advocate for a Pro-Manufacturing Policy Agenda

IPC places a high priority on educating government officials about key policy issues of importance to the electronics industry. That’s why top executives from leading electronics companies gathered in Washington, D.C. recently for “IMPACT Washington, D.C. 2016.”

Beyond FR-4: High-Performance Materials for Advanced Designs, Part 1

In the past 40-plus years of PCB manufacturing, the primary material of choice has overwhelmingly been e-glass supported FR-4 resin laminates. This is due to the excellent dimensional stability and reasonably acceptable thermal performance (based on glass transition temperature [Tg] and decomposition temperature [Td]). In general, these materials exhibit impressive performance and excellent cost for a wide range of applications.

Weiner’s World

3D printing, China’s SMT equipment and robotics markets, IPC’s mandate, counterfeiters, and Taiwan PCB makers’ shift to automotive electronics—Gene Weiner talks about these things and more in this new article.

Orbotech’s Latest Technology at IPC APEX EXPO

Orbotech presented their latest new technologies at IPC APEX EXPO 2016. The Nuvogo 1000 is a higher power version of their multi wavelength direct imaging machine, as well as their new automated optical shaping technology which can add copper deposition to an otherwise defective PCB. I met with Orbotech’s Micha Perlman in their booth on the show floor, to learn more.

Ventec International Group Expands North American Focus

Ventec International Group is looking to expand their U.S. operations, and they’ve begun this process by bringing Chris Alessio on board as VP of sales and operations of Ventec USA. I met with Chris and Ventec USA President Jack Pattie at IPC APEX EXPO 2016 to discuss their approach and possible opportunities for the North American laminate market.

New Tools for Human-Machine Collaborative Design

Advanced materials are increasingly embodying counterintuitive properties, such as extreme strength and super lightness, while additive manufacturing and other new technologies are vastly improving the ability to fashion these novel materials into shapes that would previously have been extremely costly or even impossible to create.

Rogers: 'To PIM-test Our Material, You Have to Build a Circuit'

Passive intermodulation (PIM) is a circuit anomaly that has been occurring in cellular base station antennas, causing tremendous frustration and cost to antenna OEMs. As the supplier of the materials being used by these OEMs, Rogers Corp., and more specifically, Product Manager Tony Mattingly, must come up with a solution.

RTW IPC APEX EXPO: Saline Lectronics Discusses How Industry 4.0 Can Give CMs the Edge

Jason Sciberras and Davina McDonnell of Saline Lectronics speak with I-Connect007 guest editor Steve Williams about how they embraced Industry 4.0 in their manufacturing line.

Novel Miniaturized Circulator Opens Way to Doubling Wireless Capacity

Researchers develop a microelectronic substitute for larger-scale magnetic components and open a pathway to more efficient communications and more capable radar systems.

Today’s MilAero Options, Part 1: 'Pride Goeth Before...'

Historians, with their 20/20 hindsight, often write about the inevitable decline and fall of kingdoms, empires, religions, organizations, governments, and all the other permanent structures we humans build.

IPC APEX EXPO: Zentech's Matt Turpin Talks Strategies for Success in CM Industry

Zentech's Matt Turpin, named as one the electronics industry's Rising Stars by the IPC, speaks with I-Connect007 guest editor Dan Beaulieu on how to become successful in the electronics contract manufacturing space.

IPC President John Mitchell on the Past, Present, and Future, Part 1

We conducted this interview with IPC President John Mitchell on the show floor at IPC APEX EXPO to discuss the event, the changes on the IPC board, and the key metrics that IPC uses to measure their own performance and effectiveness. John also invites the industry to a unique challenge.

Happy’s Essential Skills: Failure Modes and Effects Analysis (FMEA)

Failure modes and effects analysis (FMEA) is a systematic process to evaluate failure modes and causes associated with the design and manufacturing processes of a new product. It is somewhat similar to the potential problem analysis (PPA) phase of the Kepner-Tregoe program.

Catching up with…PNC: Open House Planned for May

I’m a great believer in open houses. Any time customers and vendors get together to learn and talk about what they can do for each other it’s a good thing. That’s why, when I heard that PNC, in Nutley, New Jersey, planned to hold an open house on May 20, I wanted to learn more about it. So I called my friend Sam Sangani, the company’s owner, to learn more about it.

Karl's Tech Talk: Green Legislation and the Impact on Electronic Materials and Processes

In general, “green” and “environmentally friendly” refer to manufacturing that involves the replacement of toxic substances with less toxic materials, the elimination of materials or processing steps, less consumption of chemicals (i.e., more efficient or higher yield processing), reduction of water use, reduction of energy use, less space requirement (i.e., smaller equipment footprint), recycling, and on-site recovery of materials.

IPC APEX EXPO: New Arlon Materials Address Design and Fab Challenges

Brad Foster, VP and general manager of Arlon, discusses some new laminates and pre-pregs that help designers and fabricators address a variety of challenges. He explains how Arlon works with customers to help them with stack-ups and other issues.

ESI: Drawing on a Deep History to Create a Vision for the Future

I had an opportunity to sit down for a chat with ESI’s Vice President and General Manager Michael Darwin at the recent HKPCA show. Darwin shared some of the challenges that come with managing the culture of a 70-year-old company, and a little about where they plan to focus their efforts going forward.

Catching up with…Fastrak Manufacturing’s Phil Guzman

Fastrak Manufacturing is one of those companies that focus on solving problems, tough problems, problems that other companies cannot solve. Technically a contract manufacturer, Fastrak is much more than that, working with companies who have an engineering/manufacturing problem to solve, or with inventors trying to get a new product developed, manufactured and out to the market in a limited amount of time.

IPC APEX EXPO: Blackfox Celebrating 20 Years of Providing Quality Training

Sharon Montana-Beard, vice president of sales and operations at Blackfox, talks with I-Connect007's Andy Shaughnessy about the company's 20th year in business, their recent partnership with Pace, as well as their latest developments and activities.

Walt Custer Elaborates on his Annual IPC APEX EXPO Forecast Presentation

IPC APEX EXPO 2016 has come and gone, and this year, Walt Custer’s annual presentation forecasting the upcoming year for the industry was much anticipated, as always. I met up with Walt at the show to learn about his presentation and dig deeper into his findings.

IPC APEX EXPO: Acromag Discusses Newly Launched Electronic Contract Manufacturing Division

Acromag’s David Wolfe and Stacy Moore talk with I-Connect007’s Andy Shaughnessy about the company’s newly launched electronic contract manufacturing division, and the services it will offer to industries including telematics, military, aerospace, and automotive.

Program Aims to Facilitate Robotic Servicing of Geosynchronous Satellites

Servicing vehicle jointly developed with a commercial partner would leverage DARPA’s successes in space robotics and accelerate revolutionary capabilities for working with satellites currently beyond reach.

Rex Rozario, Part 4: A 10,000-ft. view of his Business Ventures, the Industry, and Life

In our final installment, Rex describes the common thread woven through all of his successful business ventures and varied interests: confidence and the fortitude to follow his dreams until they are realized. Rex also takes a look back at the evolution of the global PCB industry, and explains his approach to profitability, which includes building (and rewarding) a successful team.

IPC APEX EXPO: Glenn Oliver on His IPC 'Best Paper' on High-Frequency Materials

Glenn Oliver of DuPont discusses his award-winning paper, “Round Robin of High-Frequency Test Methods by IPC-D24C Task Group." Co-authors include Jonathan Weldon of DuPont, John Andresakis of Park Electrochemical, Chudy Nwachukwu of Isola, John Coonrod of Rogers Corporation, David L. Wynants of Taconic Advanced Dielectric Division, and Don DeGroot of Connected Community Networks. The paper looks at high-frequency offerings from a variety of materials providers.

Rex Rozario, Part 3: The Future Beckons

In Part 3 of our multi-part interview with industry veteran Rex Rozario, we begin with the future. Having achieved success in China, could Rex and the Graphic team have their sights trained on the U.S.? Also in this installment, Rex weighs in on China’s future, and we discuss the value of automation. Is it for everyone?

Rex Rozario, Part 2: The Beat Goes on: New Developments at Exeter, the Music Scene, and China

In Part 2 of I-Connect007’s multi-part interview with PCB industry icon Rex Rozario, we continue to discover more about what has made Graphic PLC the company it is today. Rex explains the work they’re doing with Exeter University, Graphic’s success in China, and his own personal experience in the UK music scene.

Mining Everyday Technologies to Anticipate Possibilities

For decades, U.S. national security was ensured in large part by a simple advantage: a near-monopoly on access to the most advanced technologies. Increasingly, however, off-the-shelf equipment developed for the transportation, construction, agricultural and other commercial sectors features highly sophisticated components, which resourceful adversaries can modify or combine to create novel and unanticipated security threats.

Manufacturing Institutes Can Boost the Nation

In his most recent State of the Union address, President Obama highlighted a remarkable trend of recent years: the turnaround in many corners of America’s manufacturing sector. Nearly 900,000 new jobs have been created by U.S. manufacturers in the last six years.

Robots: Eliminating the First Contact with an Enemy Force

"We should be thinking about having a robotic vanguard, particularly for maneuver formations," said Dr. Bob Sadowski. "There's no reason why the first contact with an enemy force should be with a man-platform, because it means that platform is at the greatest risk."

Integration of Cyberspace Capabilities into Tactical Units

The Army's efforts to integrate operational cyberspace capabilities into its tactical units took another big step forward during a recent training rotation at the National Training Center at Fort Irwin, California.

DuPont, Taconic and PFC Team Up For High-Speed Flex

At DesignCon, I sat down with three flex circuit specialists: Glenn Oliver of DuPont, Tom McCarthy of Taconic, and Steve Kelly of PFC Flexible Circuits. Our discussion covered a lot of territory, most notably the findings they described in the paper they were about to present later that day at DesignCon, and the future of flex, as they see it.

Unveiling the Mysteries of the Hot Universe

A University of Southampton researcher will explore the structure and evolution of the Universe, as part of the ASTRO-H X-ray space telescope mission that launched in Japan.

How a NASA Team Turned a Smartphone into a Satellite Business

Satellites aren’t small or cheap. The Solar Dynamics Observatory launched by NASA in 2010 weighs about 6,800 pounds and cost $850 million to build and put into orbit. Even the satellites built under NASA’s Discovery Program, aimed at encouraging development of low-cost spacecraft, still have price tags beyond the reach of smaller companies or research organizations.

High-Performance Laminates

High-performance laminates are characterized as base materials that in one or more aspects exceed the performance of FR-4, CEM, or paper/phenolic laminates. In this article, Karl Dietz talks about the different types of laminates, their dielectric requirements, and how they are being manufactured.

FLA Program Takes Flight

They may not have zoomed flawlessly around obstacles like the Millennium Falcon did as it careened through the hull of a crashed Star Destroyer in Star Wars VII. But the sensor-loaded quadcopters that recently got tested in a cluttered hangar in Massachusetts did manage to edge their way around obstacles and achieve their target speeds of 20 meters per second.

Fabrication Drawings and Electrical Test— Reading the Fine Print

When a new PCB design is born, designers envision what the product will provide when completed. Whether the product is for the consumer, aerospace, military, medical or countless other markets, the designers—or more likely, the customers—expect certain deliverables on the commodity they wish to purchase.

EMS: Quo Vadis? (Where are You Going?)

In an industry that is constantly changing, EMS providers have reinvented themselves to stay relevant and fuel profitable growth. In this article, Integrated Micro-Electronics Inc.'s Frederick Blancas talks about five of the many transformation trends happening in the EMS industry, and how they are pushing the industry to continue to evolve, progress and advance.

What a Long, Strange Trip it’s Been—and It’s a Long Way from Being Over

Harvey Miller has been in the PCB industry for more than 40 years, and he’s probably seen it all. I recently sat down with Harvey at a wine bar in Palo Alto to learn more about his history in the industry and where he sees it going forward. Harvey arrived wearing jogging shorts and running shoes. No surprise after what his doctor recently shared with him.

Mission Teams Prepare for Critical Days

Moments after Sentinel-3A separates from its rocket, a team of European mission control specialists will assume control, shepherding the newMoments after Sentinel-3A separates from its rocket, a team of European mission control specialists will assume control, shepherding the new spacecraft through its critical first days in space. spacecraft through its critical first days in space.

Happy’s Essential Skills: The Need for Total Quality Control (Six Sigma and Statistical Tools), Part 2

The statistical representation of Six Sigma describes quantitatively how a process is performing. To achieve Six Sigma, a process must not produce more than 3.4 defects per million opportunities. A Six Sigma defect is defined as anything outside of customer specifications. A Six Sigma opportunity is then the total quantity of chances for a defect.

The Road Less Traveled (Part 3): Why Process Controls and Pride Matter

In the last piece of this three-part article series, Zentech Manufacturing Inc.'s Judy Warner writes about the importance of SMT process controls and pride of ownership, and how having them as part of the company culture can lead to manufacturing and service excellence and success.

New Tool Provides Successful Visual Inspection of Space Station Robot Arm

As NASA takes a break in RRM operations, it’s looking back on past achievements and celebrating one of its latest accomplishments - the successful inspection of Canadarm2, the International Space Station’s (ISS) robotic arm. In time, this visual inspection capability may help future servicing ventures at other orbits inspect for damage and failures on their spacecraft.

Is IPC the Past or the Future of our Industry?

In the electronics industry, there seems to be an infinite number of trade organizations, each with their own special niche and purpose. It can be challenging from the outside to understand why they each exist and how they fit together.

The Road Less Traveled (Part 1): Contract Manufacturing Differentiators

The word "differentiator" is tossed around a lot these days in the electronics industry—especially within the contract manufacturing (CM) community. When evaluating a new potential CM partner, decision makers frequently ask: "What would you say differentiates your organization from other contract manufacturers?" This article talks about three powerful and very real difference-makers that would set a CM apart from the competition.
Subscribe | Magazines | RealTime with | JobConnect007 | Education | Webinars
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in