Facing the Future: Time for Real Talk, Early and Often, Between Design and Fabrication
Trouble in Your Tank: Can You Drill the Perfect Hole?
Latest Articles
Siemens and Valor: Two Complementary DFM Technologies
Before IPC APEX EXPO kicked off, Andy Shaughnessy attended a Siemens seminar in San Diego on smart manufacturing for electronics and the integration of technologies from Siemens’ digital industry software and Valor. Afterward, Andy spoke with Andy Farrington, director of portfolio development for the Americas, about the event, as well as some of the hot topics and solutions that the speakers addressed.
IPC’s Dr. John Mitchell Commends U.S. Manufacturers and Governors
On March 31, Dr. John Mitchell, IPC president and CEO, gave Barry Matties an update on the industry response to COVID-19 since their conversation on March 20. Mitchell provides an overall update on the industry, commending U.S. manufacturers for their proactive responses.
Industry Outlook With Siemens’ Fram Akiki
In this video interview from the show, Editor Dan Feinberg speaks with Fram Akiki, VP of electronic and semiconductor industries for Siemens, about the biggest challenges in the electronics industry. They also discuss major industry trends, including smart connected devices used in autonomous transportation and robotics, increased complexity, and a reduced time to market.
Advances in Medical Diagnostics Using LoC and LoPCB Technologies
Several techniques for detection and diagnosis of COVID-19 are currently under development, some of which may detect the novel virus exclusively; others may also detect strains that are genetically similar. A detection kit recently announced uses technology based on a portable lab-on-chip (LoC) platform capable of detecting, identifying, and differentiating MERS-CoV, SARS-CoV, and COVID-2019 in a single test.
BGA Standard Update With Ray Prasad
In this video interview from the show, Ray Prasad, president of Ray Prasad Consultancy Group, updates Guest Editor Joe Fjelstad on the ongoing work with the BGA standard and the latest revision that is going to ballot.
With DIS, Accurate Registration is Everything
In this video interview from the show, Technical Editor Pete Starkey and Jesse Ziomek, VP of sales for DIS, discuss how the company achieves ultimate accuracy in layer-to-layer registration, not just in rigid multilayers, but also in flex and rigid-flex builds. Jesse also comments on keeping technology exciting enough to attract young engineers into the industry.
I-Connect007 COVID-19 Outbreak Research Survey Results
Our ongoing survey regarding the effects of the COVID-19 outbreak on the electronics industry has produced some interesting results. Here are some of the response highlights as of today. If you would like to make your voice heard, please take the survey.
Dan Beaulieu: Adapting to New Methods at D.B. Management
In this audio interview, Nolan Johnson gets an update from Dan Beaulieu, a 40+ year veteran of the electronics manufacturing industry and an industry consultant for 25+ years. Dan shares an update on current business operations for D.B. Management, including how—like his clients—he may be at home, but it's still business as usual. Dan also offers his perspective on how our industry will weather and emerge from this challenging time.
Todd Kolmodin: Gardien an Essential Business for U.S. DoD Work
Todd Kolmodin, VP of quality for Gardien Services USA, updates Nolan Johnson on Gardien’s operations. Specifics include Gardien’s certification as an essential business for U.S. Department of Defense work and an overview of the work and staffing policies in place at all of the company's facilities across the United States and the various work restrictions—all with the goal of “keeping the wheels turning” in the industry.
EPTAC Preparing Young People for Future in Industry
In this video interview from the show, Guest Editor Kelly Dack and Leo Lambert, VP/technical director of EPTAC Corporation, describe the impact of internships and apprenticeships, the importance of IPC specifications, the effectiveness of certification.
Matt Stevenson on Sunstone Circuits' Current Operations
Nolan Johnson speaks with Matt Stevenson, VP of marketing at Sunstone Circuits, who shares an update on the company's current level of business operations under COVID-19 restrictions. Stevenson confirms that Sunstone Circuits is fully operational and classified as an essential business.
The Smart Factory: All the Bits and Bobs
“Smart factory” is another phrase that describes Industry 4.0 programs. These programs seem to have replaced CIM and CAM, but it did not make them obsolete. While these topics are getting a lot of press, there is nothing new about them. We have been on a journey to automate manufacturing since the mid-‘70s. What has evolved are faster and cheaper computers, and more complex and integrated networking.
InduBond Gets Hot With Induction Heating Lamination
In this video interview from the show, Editor Nolan Johnson sat down to speak with Víctor Lázaro, InduBond’s R&D director and technical manager, about InduBond's latest technology for panel lamination utilizing induction heating. InduBond demonstrates a lamination oven on the IPC APEX EXPO show floor, as well as the advantages of the technology.
This Month in PCB007 Magazine: A Scorecard for Suppliers
Al Block and Naji Norder from National Instruments talk about the PCQR2 tool, what that entails, and how companies can use the data-driven analysis to validate the quality of suppliers and potentially save millions.
What It Takes to Be a Milaero Supplier, Part 2
The decision to pursue military and aerospace (milaero) certification impacts every facet of the organization, and not every shop is prepared to make this transformation. In Part 2, Anaya Vardya focuses on what it takes to be a milaero supplier in the areas of engineering and CAM.
IPC Chief Economist Dr. Shawn DuBravac Shares Industry's Financial Outlook
On March 23, IPC Chief Economist Shawn DuBravac, Ph.D., CFA, spoke with I-Connect007 publisher Barry Matties in an exclusive phone interview immediately following DuBravac’s online briefing to IPC member attendees.
IPC APEX EXPO 2020 Attendees Speak: Heston Singh
"We have been coming here for many years, and we had another good experience this year," said Unitron's Heston Singh. "If it wasn’t good, we wouldn’t be coming back. They have products that are needed for this market, so we’ll be back every year."
IPC President and CEO Dr. John Mitchell: COVID-19 Global Industry Update
On March 20, Dr. John Mitchell, IPC president and CEO, spoke with I-Connect007 publisher Barry Matties in an exclusive phone interview with updates on COVID-19-related current events in the manufacturing industry. In this information-packed 14-minute audio interview, Dr. Mitchell shared key takeaways from Friday’s IPC Executive Forum conference call.
Book Review: The 10 Stories Great Leaders Tell
Everyone is talking about stories, and rightfully so. Anyone who knows anything about marketing in the 21st century knows that the way to get into peoples’ heads is to tell them a story. Dan Beaulieu reviews Paul Smith's 'The 10 Stories Great Leaders Tell.'
Alumni Week at IPC APEX EXPO 2020
When you see friends and colleagues just once a year, you would think there would be a lot of catching up to do. That’s not the case at IPC APEX EXPO. Greeting friends and colleagues is always like picking up a conversation you had with them yesterday. Everyone looks the same, acts the same (we age well and lightly!), and we talk about the same things with just slight modification—like a daily conversation would evolve.
When Your Fabricator Is Late
The I-Connect007 Editorial Team recently had a wide-ranging discussion with John Watson, CID, of Legrand. Questions covered include, “What happens when your fabricator is late, whether it’s a prototype or volume production?” and, “What are the costs and ramifications up and down the chain?”
Best Practices Highlighted at the 2020 IPC EMS Management Meeting
The key challenge at the top of EMS leaders’ minds during roundtable discussions was the lack of skilled workers. Leaders brainstormed solutions like creative identification and sourcing of talent outside of the manufacturing sphere, leveraging the flexibility of smaller businesses to make changes attractive to potential employees as well as cooperation with IPC and other talent development programs. John Mitchell updated the group on the IPC Education Foundation (IPCEF) and workforce initiatives to build and support workforce needs. The group welcomed Andy Marris of MRA, who discussed motivating and engaging an existing workforce to create a competitive advantage.
DownStream: Smoothing out the Post-Processing Bumps
In this video interview from the show, Joe Clark, co-founder of DownStream Technologies, gives Guest Editor Kelly Dack an overview of the company and their innovative product line, which serves to smooth the bumps that can occur between source design output and manufacturing line input. As Joe explains, 2019 was a great year for the company, and he expects that trend to hold through 2020.
Trends From the Show: Solder and Software
In my role as a media representative, my perspective on IPC APEX EXPO may be a bit different from that of many attendees. Since the I-Connect007 team had the opportunity to talk to many attendees and exhibitors and listen to their stories over the course of the week, our view can be particularly wide. When I reflected on all the conversations, pieces from all throughout the week coalesced and provided a different understanding of and takeaway from the show.
DOX Electronics Discusses New DoD Cybersecurity Requirements
In this video interview from the show, Managing Editor Nolan Johnson speaks with two DOX Electronics technologists, founder and VP Ken Michael and senior account executive Larry Cohen, about the new government cybersecurity requirements necessary to deliver DoD contracts. Ken and Larry also share their upcoming presentation on business security measures, both digital and physical. If you’re bidding on DoD contracts, you won’t want to miss this video.
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in