-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Sensible Design: Why are Resin Properties So Important?
November 21, 2016 | Alistair Little, ElectrolubeEstimated reading time: 2 minutes
Last month, I started this series of columns on resins by going back to basics, questioning the core rationale for potting and encapsulation with resins, their fundamental chemistries and how each resin type differs one from the other—indeed, how their individual properties can be exploited to maximise performance under a wide range of environmental conditions. I hope readers found this useful. Of course, when it comes to the choice and applications of resins, there’s a great deal more to discuss, and over the following months I hope to provide some useful tips and design advice that will help you in your quest for reliable circuit protection.
For this month's column, I'm placing a bit more emphasis on the critical points that arise when you embark on resin selection. We need to get down to the real nitty gritty here because it’s important that circuit designers have an understanding of some of the basic properties of resins before deciding which is the most suitable for the task in hand.
But let's not get too technical at this stage; instead, I'd like to simplify the selection criteria and try to make life a bit easier for those who have to make the decisions. So, picking up on my colleague Phil Kinner's format of providing a five-point guide in his previous articles on conformal coatings, let's take a look at five key resin properties that, if not taken carefully into consideration, could have serious implications for the performance of your application.
Hardness
Perhaps counterintuitively, bearing in mind that a resin is there to protect, the cured hardness of the resin is actually rather important as the higher the hardness, typically the stiffer the resin will be. For example, if cured too hard, the resin may place too much stress upon components, particularly those with fragile connection legs. On the other hand, if too soft, then the resin will be easy to remove and it will provide reduced protection against chemicals and leave components vulnerable to mechanical shock and vibration. Cured resin hardness is measured on the Shore A (softer polyurethanes) and D (harder epoxies) scales.
Of course, there are applications in which the encapsulation resin must have an extremely low hardness—in order to maintain flexibility at low temperatures, for example. This is particularly critical for devices that not only have sensitive components but which are also frequently exposed to rapid changes in temperature. Moreover, as some devices may need to be reworked, it will be necessary to remove the resin. In general, encapsulation resins can be difficult to remove; however, specialist formulations are available that allow the bulk of the resin to be cut out of the unit for this purpose.
Colour
What many might consider to be the least important property—colour—could actually be critical for certain applications. Optically clear resins may be desirable for a variety of reasons and this property is of particular importance when it comes to the potting of LED lighting fixtures, as the cured resin will obviously need to retain its clarity for the life of the unit. It must also be UV resistant, particularly for outdoor LED fixtures. Colourless resins are also useful for prototyping applications as the encapsulated components are easily viewed during and after environmental and mechanical testing.
To read this entire article, which appeared in the October 2016 issue of The PCB Design Magazine, click here.
Suggested Items
Argonne, Toyota Collaborate on Cutting-Edge Battery Recycling Process
05/01/2024 | BUSINESS WIREThe U.S. Department of Energy’s (DOE) Argonne National Laboratory has recently launched a collaboration with Toyota Motor North America that could reduce the nation’s reliance on foreign sources of battery materials.
Europlacer Presents New Range of iineo SMT Placement Machines.
05/01/2024 | EuroplacerFor more than 15 years, the Europlacer iineo placement machines have made their mark on the SMT industry with unique features and unrivalled flexibility. Today, Europlacer announces the launch of the second generation iineo.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
Koh Young Extends Invitation to the 2024 IEEE Electronic Components and Technology Conference
04/30/2024 | Koh YoungKoh Young, the industry leader in True3D measurement-based inspection solutions, invites you to join us at the at the 2024 IEEE Electronic Components and Technology Conference from May 28-31, 2024, in Denver, Colorado at the Gaylord Rockies Resort & Convention Center.
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.