Elementary, Mr. Watson: High Power: When Physics Becomes Real
The Shaughnessy Report: Watt About Power Integrity?
Global PCB Connections: Understanding Your Fabricator’s Capabilities (or Niche)
Performance Evaluation of Thin-Film Embedded Resistors
July 24, 2017 | Dora Yang, PCBCartEstimated reading time: 1 minute
Thin-film microstrip circuits have been widely applied in microwave communications, electronic countermeasures (ECM), and aerospace applications, etc. When manufacturing thin-film ICs, it is very important to apply deposited thin-film resistor material to fabricate high-accuracy and highly stable thin-film embedded resistors. Thin-film ICs call for thin-film resistors that meet these stringent requirements:
- Square resistance should be wide enough
- Temperature coefficient of resistance should be small
- Adhesive force with substrate should be strong enough
- Thin-film resistors should feature a stable and reliable performance
- Filming should be easy and convenient
- Should be capable of handling high-temperature processing, high power and relatively wide application range.
A Brief Introduction of Embedded PCBs
The first IC invented by Jack Kilby in 1959 contained only two transistors and a resistor. Nowadays, multiple complex techniques are applied to combine tens of millions of transistors into one single PC chip. With electronic products stepping towards miniaturization and multifunction, a type of embedded passive component technology occurred to meet the increasingly higher demands. The ratio between passive components and active components is approximately 20:1, density has been gradually going up with the ratio rising. With so many passive components embedded in PCBs, the area of an SMT circuit board shrinks by 40% compared to board fabricated through embedded technology.
To read this entire article, which appeared in the June 2017 issue of The PCB Design Magazine, click here.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
The Republic of Korea Selects L3Harris for Airborne Early Warning and Control Aircraft Program
10/20/2025 | BUSINESS WIREL3Harris Technologies has received a contract to deliver modified Bombardier Global 6500 airborne early warning and control (AEW&C) aircraft to the Republic of Korea Air Force.
Molex Announces Agreement to Acquire Smiths Interconnect
10/17/2025 | MolexMolex, a leading global electronics connectivity innovator, announced that it has signed an agreement to acquire Smiths Interconnect.
American Standard Circuits Achieves Successful AS9100 Recertification
10/14/2025 | American Standard CircuitsAmerican Standard Circuits (ASC), a leading manufacturer of advanced printed circuit boards, proudly announces the successful completion of its AS9100 recertification audit. This milestone reaffirms ASC’s ongoing commitment to the highest levels of quality, reliability, and process control required to serve aerospace, defense, space, and other mission-critical industries.
Kodiak Assembly Solutions Renews ITAR Registration, Providing Secure and Compliant Manufacturing for Defense & Aerospace
09/25/2025 | Kodiak Assembly SolutionsKodiak Assembly Solutions LLLP, a leading electronics contract manufacturer, has successfully renewed its ITAR (International Traffic in Arms Regulations) registration.
Cyient DLM, A Voice from the Frontlines
09/24/2025 | Arpita Das, Global Electronics AssociationOnce seen as a low-cost, build-to-print destination, India’s EMS sector is rapidly emerging as a global hub for high-reliability electronics, particularly in strategic sectors like aerospace, defense, and medical. As such, we highlight some companies that exemplify the strength and potential of Indian manufacturing.