Target Condition: Are Autorouters Friend or Foe?
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
Trilogy Circuits: Mil/Aero Demands Technological, Regulatory Expertise
August 7, 2017 | Andy Shaughnessy, PCBDesign007Estimated reading time: 1 minute
In the 16 years since its founding, Trilogy Circuits has become one of the go-to companies for mil/aero PCB design and manufacturing. I spoke with Charlie Capers, president and founder of the Richardson, Texas firm, about how he keeps ahead of the game. As he explains, succeeding with mil/aero PCB work requires not only mastery of the technological side, but of the regulations and certifications as well.
Andy Shaughnessy: Charlie, why don’t you start out with a little background on Trilogy Circuits. How much of your business today is military and aerospace?
Charlie Capers: Trilogy started as a PCB design service bureau in 2001 and then expanded into a full-service EMS company in 2004, specializing in military and government applications. Roughly 60–75% of our business is some type of government project.
Shaughnessy: I understand that your circuit boards end up in some pretty interesting military applications.
Capers: True. Some of our customers provide very vague descriptions of what a certain product does, while others will share more details. It helps us develop a more robust product if we have some idea about the operating conditions and environment the product will be used in. We design and manufacture some interesting systems for major players in the military and aerospace sector.
Shaughnessy: In our recent mil/aero survey, some people said that keeping up with changing regulations is one of the toughest parts of the job. What are we up to now? ITAR, NIST, AS9100…and a new AS9100 rev is coming.
Capers: This is one of the most complex areas when dealing with government contractors. ITAR registration with the State Department is a given these days and requires a lot of training and awareness when dealing with sensitive information. Compliance to a new cybersecurity mandate will be required by the end of 2017, which includes DFARS 252.204-7012 and NIST SP 800-171. These impose heightened security safeguards and mandatory reporting requirements and subcontractor flow-downs on DoD contractors handling Covered Defense Information (CDI). AS9100 Rev D is here, and any audits conducted after June 15, 2017 will have to be to the revision D standard. Revision D takes this registration to a whole new complexity level. Transition audits must be completed by September 15, 2018. Revision C certificates will become invalid after that date.
To read this entire interview, which appeared in the July 2017 issue of The PCB Design Magazine, click here.
Share on:
Suggested Items
S&K Aerospace Awarded Major Contract Under DLA Maritime Acquisition Advancement Program
07/02/2025 | BUSINESS WIRES&K Aerospace, LLC has been awarded a significant contract under the Defense Logistics Agency’s (DLA) Maritime Acquisition Advancement Program, managed by the U.S. Naval Supply Command - Weapon Systems Support (NAVSUP WSS) in Mechanicsburg, PA.
Green Circuits to Exhibit Full-Service Electronics Manufacturing Solutions at 2025 SMD Symposium
07/02/2025 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, is pleased to announce its participation in the 2025 SMD Symposium, taking place August 5-7 at the Von Braun Center in Huntsville, Alabama.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.
RTX, the Singapore Economic Development Board Sign MOU Outlining 10-year Growth Roadmap
06/20/2025 | RTXRTX and the Singapore Economic Development Board (EDB) have signed a Memorandum of Understanding (MoU) which outlines a 10-year roadmap to further long-term strategic collaboration in Singapore.