-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Aismalibar North America to Increase Production of FASTHERM
May 22, 2018 | AismalibarEstimated reading time: 1 minute
Aismalibar has announced that they will increase production capacity of their FASTHERM product by 42% in 2018 due to demand from the automotive industry. FASTHERM was developed by Aismalibar to achieve a faster thermal transition from the LED thermal pad to the heat sink. This superior thermal transition can be achieved by using the entire COBRITHERM HTC product range with either a copper or copper-aluminium base. By using Aismalibar COBRITHERM HTC range together with Fastherm technology, LEDs operate at a temperature 30ºC to 50ºC lower due to the direct thermal transition from the thermal pad to the heat sink.
Jeff Brandman, president of Aismalibar North America, remarks, “We’re very excited to continue to work closely with several OEMs within automotive lighting product development. We’re very encouraged since the introduction of FASTHERM to the industry in a short time we have received production specification from OEMs with many new project on the horizon.”
About Aismalibar
AISMALIBAR was one of the first IMS laminate manufacturers in the world and was the first in Europe. Aismalibar is a manufacturer of copper clad laminates who produces high quality base materials for the PCB industry. Our products provide superior thermal management through high thermal conductivity, low thermal impedance and high dielectric capacity. AISMALIBAR was one of the first IMS laminate manufacturers in the world and was the first in Europe. AISMALIBAR is proud to introduce their material to the North American market in 2012. Their product IMS Cobritherm ® is a qualified and recognized Insulated Metal Substrate which gives the best thermal management solutions with high thermal conductivity, low thermal impedance and high dielectric capacity. AISMALIBAR has implement a 100% proof test with 1-3KV (High Pot Test) to all IMS laminates coming out of their plant. This is the only way to insure the dialectical strength is perfect and that production problems are detected before PCBs arrive to the end user.
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.