-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Enhancing Board Level Reliability for Harsh Environments of Large WLP’s Reworkable Edgebond and Edgefill Adhesives at SMTAI 2019
August 19, 2019 | ZymetEstimated reading time: 1 minute
At the SMTA International 2019 technical conference, Portland State University and Zymet will present their investigations on enhancing the board level reliability of large WLP’s, for harsh environment applications. WLP’s, which include WLCSP’s and FO-WLP’s, offer a path to lower weight, smaller formfactor, and higher performance.
Figure 1. 12-mm WLCSP’s without adhesive (a), dot-edgebonded with reworkable edgebond adhesive (b), full-edgebonded with reworkable edgebond adhesive (c), and edgefilled with reworkable edgefill adhesive (d).
However, their low coefficient of thermal expansions is not well matched to that of commonly used organic substrates. This mis-match result in early solder joint fatigue and early failures in thermal cycle tests, tests that are more and more difficult to pass as the package gets larger and the conditions become more severe. This limitation constricts the user to using either smaller package sizes or to limiting the use of such packages to less severe environments. The investigation shows that reworkable adhesives can enhance the board level reliability of large WLP’s, even for harsh environment applications.
Thermal cycle testing from -40°C to +125°C was performed on a 12-mm WLCSP that was assembled with SAC solder on a rigid PCB. Non-bonded assemblies (Figure 1a) are compared with those bonded with a reworkable edgebond adhesive, applied in both dot-edgebond and full-edgebond configurations (Figure 1b & 1c), and with a reworkable edgefill adhesive (Figures 1d). The expected poor performance of the non-bonded package is confirmed. All three bonded configurations significantly improved performance, raising characteristic life by 300% to 1000%, depending on the configuration.
The paper, “Multi-axis Loading Effect on Edgebond and Edgefilled WLCSP Thermal Cycling Performance”, will be presented at Session APT4: Wafer Level Packaging, on Wednesday, September 25th, 2019. For more information about reworkable edgebond adhesives and edgefill adhesives, visit Zymet at Booth #941, SMTAi 2019, Rosemont Convention Center, Rosemont, IL, September 22 - 26, 2019. Or, email the company at info@zymet.com. Zymet is a global supplier of adhesives and encapsulants, focused on the development and manufacture of enabling materials for the electronics industry.
Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.