-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSignal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
Showing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
Letter to the Editor: Rick Hartley Offers Addendum on App Notes
June 11, 2020 | Rick Hartley, RHartley EnterprisesEstimated reading time: 1 minute
In the June 2020 issue of Design007 Magazine, the I-Connect007 editorial team interviewed design instructors Rick Hartley and Dan Beeker regarding their belief that designers should not trust app notes until they've been proven to be accurate. After the issue was published this week, Rick emailed us with a few more points that he wished to contribute to the ongoing app note conversation.
Hi Andy,
After reading the June issue of Design007 Magazine on app notes, I realized there is one key point that I have not pushed hard enough. My real heartburn, and Lee Ritchey’s and Dan Beeker’s for that matter, is that app notes are mostly insufficient in the area of PCB design guidance—not in the area of circuit design assistance and advice.
Back in the days when PCB design was “Who cares?” app engineers were the circuit design engineer’s best friend. But in these days where PCB design really matters, they frequently fall on their face, since colleges teach nothing about PCB design for SI and EMC.
This really came home to me when I read the interview with Geof Lipman. Barry Matties stated to Geof, “We see some of the industry’s top design instructors telling their classes, ‘Don’t trust app notes. Assume they are wrong until proven right.’” Geof reacted, “They might have been being dramatic. I’m not sure.”
I can tell you with absolute clarity that neither Lee, Dan, nor I are being dramatic. The problem is that the information that Geof gleans from app notes is much different than the info PCB designers take from them. Simply put, app engineers do not understand how PCBs work. They think they do, but they do not!
There are, however, a couple of exceptions to the premise that most of the problems with app notes have to do with PCB layout. One of these is something that Dan Beeker pointed out in the interview: the fact that many app engineers seem to be in love with the idea of putting ferrites on the power pins of digital ICs. That’s one of Lee’s pet peeves also. He even discusses this in the second volume of his book Right the First Time.
Thanks for allowing me to clarify.
Rick Hartley
RHartley Enterprises
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Staying on Top of Signal Integrity Challenges
09/16/2025 | Andy Shaughnessy, Design007 MagazineOver the years, Kris Moyer has taught a variety of advanced PCB design classes, both online IPC courses and in-person classes at California State University-Sacramento, where he earned his degrees in electrical engineering. Much of his advanced curriculum focuses on signal integrity, so we asked Kris to discuss the trends he’s seeing in signal integrity today, the SI challenges facing PCB designers, and his go-to techniques for controlling or completely eliminating SI problems.
ASM Technologies Limited signs MoU with the Guidance, Government of Tamilnadu to Expand Design-Led Manufacturing capabilities for ESDM
09/15/2025 | ASM TechnologiesASM Technologies Limited, a pioneer in Design- Led Manufacturing in the semiconductor and automotive industries, announced signing of Memorandum of Understanding (MoU) with the Guidance, Government of Tamilnadu whereby it will invest Rs. 250 crores in the state to expand its ESDM related Design-Led Manufacturing and precision engineering capacity. ASM Technologies will acquire 5 acres of land from the Government of Tamilnadu to set up a state-of-the-art design facility in Tamil Nadu's growing technology manufacturing ecosystem, providing a strong strategic advantage and long-term benefits for ASM.
Variosystems Strengthens North American Presence with Southlake Relaunch 2025
09/15/2025 | VariosystemsVariosystems celebrated the relaunch of its U.S. facility in Southlake, Texas. After months of redesign and reorganization, the opening marked more than just the return to a modernized production site—it was a moment to reconnect with our teams, partners, and the local community.
Deca, Silicon Storage Technology Announce Strategic Collaboration to Enable NVM Chiplet Solutions
09/11/2025 | Microchip Technology Inc.As traditional monolithic chip designs grow in complexity and increase in cost, the interest and adoption of chiplet technology in the semiconductor industry also increases.
I-Connect007 Launches New Podcast Series on Ultra High Density Interconnect (UHDI)
09/10/2025 | I-Connect007I-Connect007 is excited to announce the debut of its latest podcast series, which shines a spotlight on one of the most important emerging innovations in electronics manufacturing: Ultra-High-Density Interconnect (UHDI). The series kicks off with Episode One, “Ultra HDI: What does it mean to people? Why would they want it?” Host Nolan Johnson is joined by guest expert John Johnson, Director of Quality and Advanced Technology at American Standard Circuits (ASC).