Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
Beyond Design: The Metamorphosis of the PCB Router
Planning Your Design Education Strategy
March 9, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
There are (finally) some young people joining the PCB design and design engineering community. We’re glad to see their youthful faces at trade shows and conferences. But if you’re a recent grad and working in your first “real” job, you might be asking yourself: How do I set up an education and training plan for my career in PCB design? What’s my next step?
We asked Eric Bogatin to weigh in with his thoughts. Eric has a unique viewpoint: He’s a veteran signal integrity instructor, as well as a professor in the College of Engineering and Applied Science at the University of Colorado, Boulder. In this interview, Eric lays out some of his planning strategies and the need for a degree in electrical engineering in the PCB design world.
Andy Shaughnessy: Eric, how do you help your students plan their educational objectives at the college?
Eric Bogatin: This is an important question. It is never too early to start thinking about what your career goals are, either working in the industry or just as a student. If a student is not 100% clear and dedicated to a particular path, I encourage them to use the opportunity as an undergraduate to experiment and explore topics. They need to get enough experience to figure out what they like—design, measurement, software, simulation, circuits, fields, designing systems, working with people, working behind a computer, teaching, or something else.
Once they have a sense of what they really enjoy and a plan, then we select courses to help support that path. Because of the core courses most EE students need to take, there is not a lot of flexibility, but there are usually four or five electives that a student can select.
Shaughnessy: What criteria should designers keep in mind when evaluating their educational needs in the industry?
Bogatin: You need a balance between the fundamental principles and the hands-on experience applying these principles. Taking online classes is fine, but plan to get some kits so you can actually build and measure circuits. Taking some courses in which you will get experience designing and building reference designs will help build your confidence.
Shaughnessy: What would you advise to PCB designers who want to set up their own strategic learning plans?
Bogatin: If you want to be a PCB designer, rather than a circuit designer and hardware designer, then you probably don’t need a BSEE degree. Just getting some electronics experience and training in designing and building some boards is good enough to get started. But if you are going to be a hardware engineer and take responsibility for the circuit design and do the board design, then a BSEE and lots of hands-on experience designing and building circuits is important. You cannot get too much experience building working circuits in a solderless breadboard to gain experience in debugging and characterizing circuits.
To read this entire conversation, which appeared in the March 2022 issue of Design007 Magazine, click here.
Share on:
Suggested Items
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
06/26/2025 | John Watson -- Column: Elementary, Mr. WatsonThere's a story about a young woman preparing a holiday ham. Before putting it in the pan, she cuts off the ends. When asked why, she shrugs and says, "That's how my mom always did it." She asks her mother, who gives the same answer. Eventually, the question reaches Grandma, who laughs and says, "Oh, I only cut the ends off because my pan was too small." This story is a powerful analogy for how many PCB designers approach routing today.
Siemens Turbocharges Semiconductor and PCB Design Portfolio with Generative and Agentic AI
06/24/2025 | SiemensAt the 2025 Design Automation Conference, Siemens Digital Industries Software today unveiled its AI-enhanced toolset for the EDA design flow.
Cadence AI Autorouter May Transform the Landscape
06/19/2025 | Andy Shaughnessy, Design007 MagazinePatrick Davis, product management director with Cadence Design Systems, discusses advancements in autorouting technology, including AI. He emphasizes a holistic approach that enhances placement and power distribution before routing. He points out that younger engineers seem more likely to embrace autorouting, while the veteran designers are still wary of giving up too much control. Will AI help autorouters finally gain industry-wide acceptance?
Beyond Design: The Metamorphosis of the PCB Router
06/18/2025 | Barry Olney -- Column: Beyond DesignThe traditional PCB design process is often time-consuming and labor-intensive. Routing a complex PCB layout can consume up to 30% of a designer’s time, and addressing this issue is not straightforward. We have all encountered this scenario: You spend hours setting the constraints and finally hit the Go button, only to be surprised by the lack of visual appeal and the obvious flaws in the result.