-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Happy’s Design Tips for Material Conservation
August 25, 2022 | Happy Holden, I-Connect007Estimated reading time: 1 minute
Note: For this issue, Happy Holden provided a range of options for designers who are seeking to conserve materials in their next design. He also offered an example of the relative cost index, or RCI, that he developed at HP exclusively for PCB design. With this RCI, designers can figure out the relative cost of a new design compared to an eight-layer through-hole board.
- Consider making the board thinner; eliminate prepregs
- Design to HDI for smaller board or fewer layers (Figure 1 and Reference 1)
- Design inner layers with 1 to 2 mil smaller traces/spaces
- Swing vias for BGA breakout can reduce layer count
- Nesting and rotation on panels
- Using HDI “skip vias” to eliminate a build-up layer
Consider using new technologies:
- VeCS can reduce layer count (Figure 2 and Reference 2)
- Additive creates more routing per layer and smaller boards
- Switch HDI layers to RCF (RCC)
- Power mesh can yield fewer layers (Reference 3)
- Landless vias on the surface can mean higher routings (Figure 3 and Reference 4)
- Smaller panel peripheral border
- Different panel sizes for higher utilization
- Add-on 0.062" gold fingers as components
- Board replacement for X-outs and repanelization (Reference 5)
- Inkjet solder mask just on traces/pads
Figure 1: Replacement chart for through-hole to HDI with Relative Cost Index. Note: RCI = the relative cost compared to an eight-layer through-hole board (RCI=1.0). DEN = total wiring in inches per square inch (diagonals of equivalent density).
Figure 2: VeCS (Vertical Conductive Structures) is a licensed technology using low-footprint vertical controlled impedance interconnect with low-leakage ground shielding capable of matching interconnect impedance with SE and differential microstrip and striplines. VeCS also provides high-density differential routing solutions in =/< 1.0 mm BGA area. Unique “anti-pad” layers provide a higher cross-section area for power and heat dissipation.
Figure 3: A variety of examples of landless vias on the outer layers of a PCB.
References
- The HDI Handbook, by Happy Holden, et al, BR Publishing, Salem, Oregon, 2009.
- Happy’s TechTalk #1: Vertical Conductive Structures (VeCS), by Happy Holden, PCB007 Magazine, October 2021.
- “Innovative Use of Vias for Density Improvements,” by Happy Holden, The PCB Magazine, November 2016.
- “Against the Density Wall: Landless Vias Might be the Answer,” by Happy Holden, The PCB Magazine, June 2016.
- Happy’s TechTalk #6: Looking at the Process of Repanelization, by Happy Holden, PCB007 Magazine, March 2022.
This article originally appeared in the August issue of Design007 Magazine, here.
Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.