-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
A New Sourcing Paradigm
September 20, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
We’ve seen many changes over the past few years, and nowhere are they more evident than in the world of sourcing components. Sourcing has become one of the biggest challenges facing PCB designers and design engineers today. Gone are the days of procuring parts from a single source, and communication between stakeholders and distributors is critical.
But as we learned in a conversation with I-Connect007 columnist Kelly Dack, an EPTAC design instructor and PCB design team leader at an assembly provider in the Pacific Northwest, PCB designers can use certain layout strategies to plan for the unexpected, such as leaving extra real estate so that smaller components can be replaced by larger, readily available parts if the originals become “unobtainium.”
Here, Kelly discusses some timely sourcing ideas, why he believes industrial engineers should be involved in “right-sizing” the PCB, and why sourcing efforts must also focus on recruiting—or creating—PCB designers.
Andy Shaughnessy: Kelly, you’ve been involved with DFA issues for years. Why don’t you talk about some of the challenges you see with sourcing?
Kelly Dack: Sure. The problems we see are projects that begin as traditional projects. We have customers who come to us much like on “Shark Tank.” There’s an idea, some seed research and development has been done, the results are favorable, and they want to take the product to production. At that point, we evaluate the product to determine its feasibility for meeting the capabilities of our assembly lines. Everything is fine, just like it always is—until it’s not. That’s because with today’s rusty, knotted supply chain we are not able to source certain components. That one little thing can slow down or stop the entire project. We limp along until we can either change the design, modify it so that we can find an alternative component, or redesign the circuit so that we can use alternate components that will do the same thing.
Happy Holden: You understand design for manufacturing. Now we’re not talking about process capability; we’re talking about part availability, but that’s still manufacturing.
Dack: That is still manufacturing and sourcing, and that plays into it, Happy. A product can be totally 100% designed and look very good from a production standpoint and from a DFM standpoint. But now, when a part suddenly becomes unavailable, it could require another part to be designed in, which may not be form-fit and functionally the same, but it could still work. But now designing in this part has to be done properly so that design for manufacturability is considered. How many parts do you have to nudge? What’s the domino effect if we do manage to fit this part in?
Holden: So, we have to make a change in design so that the information is known up front and it’s not a do-over?
Dack: The problem we’re finding is that everybody is using the smaller parts, and the large parts are left over. So, if you want to find an equivalent functional part, chances are all the tiny ones have all been gobbled up, and you must be willing to buy the larger-scale parts. But how do you fit the larger-scale parts into your layout?
Shaughnessy: There are those dominoes, right?
Dack: Right. Let’s take a step back. During the shrinkage era in the ‘90s, when we were working on iterating boards down as small as they could be, I coined the term “practical packaging density plus.” The idea is that we determine an appropriate packaging density, and then once you get that dialed in, what’s wrong with adding just a little more for future design purposes or manufacturing purposes? Why do we constantly design to the minimum, tightest density?
Shaughnessy: Are you talking about adding more real estate?
Dack: It can be real estate. Packaging density has to do with the amount of real estate on a given PCB vs. the components and everything else, and all the geometries involved with the components.
To read this entire conversation, which appeared in the September 2022 issue of Design007 Magazine, click here.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.