Beyond Design: High-speed Rules of Thumb
Global PCB Connections: A Technical Overview of Long-flex Printed Circuit Boards
The Shaughnessy Report: A Handy Look at Rules of Thumb
Zuken and CSA Catapult Present Results of R&D Collaboration
December 8, 2022 | ZukenEstimated reading time: 1 minute
Zuken, a global leader in the area of software and solutions for electronic and electrical engineering, and Compound Semiconductor Applications (CSA) Catapult are announcing an important milestone in their R&D collaboration aimed at building a development environment for state-of-the-art compound semiconductor products.
CSA Catapult is a UK government-funded non-profit organization headquartered in South Wales that was founded to help the UK become a global leader in compound semiconductors. Working with both large companies and start-ups, CSA Catapult develops and commercializes new semiconductor technology applications.
Collaborating with Zuken on a project to bring a power module layout from a graphical concept to a 3D model, CSA Catapult has identified several requirements and optimizations to Zuken’s CR-8000 Design Force chip, package and PCB co-design software that will provide designers of power electronic products with the ability to co-develop mechanical and electrical design in unison. The integration with industry simulation tools enables the efficient design iteration needed to effectively explore the design envelope for new compound semiconductor products.
As a result of the collaboration, an intuitive function was created to generate interconnections between chips and copper layers in a substrate or a printed circuit board, as well as a function to export a CAD model in a format compatible with FEM software. These advanced features will help designers significantly decrease the time required to generate a 3D model of the power module substrate, chip layout, and chip-to-chip, as well as chip-to-copper interconnections.
Dr. Alejandro Villarruel Parra, senior power electronics engineer at CSA Catapult, said, “The creation of a 3D model of the substrate, chip layout, and chip interconnections is an important part of the early-stage power module design process. Zuken’s advanced design solutions have helped to provide a preview of the module performance, which in turn makes our decision-making process faster when several concepts are being compared or helps to steer the refinement of the module geometry if a concept has already been selected.”
The new capability is included in the 2022 release of CR-8000 Design Force.
Share on:
Suggested Items
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.